Ducane Stainless 30400040 Grill Parts

304 Stainless steel Infrared rear rotisserie burner with ceramic wafer for Ducane model 30400040. For use with both liquid propane (LP) and natural gas grills. 8,000 BTU. Orifice not included. Use old orifice or purchase our orifice part# CLA-VB0245 for LP, or part# CLA-VB0246 for natural gas applications.

Dimensions:

• Maximum overall length, including mounting tab on one end: 17”
• Maximum width: 3 3/8”
• Burner box 15 3/8” x 3 3/8”
• Mounting holes: 16 1/8” on center

Part Number: CLA-BL0229
Dimensions: 3 3/8” x 17”
Material: stainless steel and ceramic
Weight: 3.0

Premium 304 commercial grade stainless steel tube burners for Ducane model 30400040. SET OF THREE (3). Fits Ducane 3-Burner Stainless and Meridian series grills. May fit others.

Part Number: CLA-BS0198-X3
Dimensions: 17” x 1”
Material: stainless steel
Weight: 1.2

Premium stainless steel cooking grids for Ducane model 30400040. SET OF TWO (2) grids. Our USA-made premium stainless grids are simply the best obtainable. We have them manufactured here in the USA to our specifications and standards, which are high. Of course, they're not available anywhere else.

Unlike the standard issue stainless grids generally found today, which are typically low grade stainless and sometimes hollow, or coated carbon steel, our premium grids are made from solid high quality stainless steel rods. If you're looking for the best, you've found it. Just look at the weight of one of these grids, over 6 pounds of solid stainless each.

• Made in USA
• Commercial grade 304 stainless steel
• 5/16” solid stainless rods
• Sold as a set of two (2) panels

Each panel measures:

• Front-to-Back: 19 1/4”
• Side-to-Side: 12”

Total Side-to-Side: 24"

Part Number: CLA-GS0004-X2
Dimension Front-to-Back: 19 1/4”
Dimension Side-to-Side: 24”
Material: stainless steel
Weight: 16.9

Premium quality heavy duty stainless steel cooking grid for Ducane model 30400040. Our USA-made premium stainless grids are simply the best obtainable. We have them manufactured here in the USA to our specifications and standards, which are high. Of course, they're not available anywhere else.

Unlike the standard issue stainless grids generally found today, which are typically low grade stainless and sometimes hollow, or coated carbon steel, our premium grids are made from solid high quality stainless steel rods. If you're looking for the best, you've found it. Just look at the weight of one of these grids, over 8 pounds of solid stainless each.

• 304 commercial grade stainless steel
• Large diameter 5/16” solid stainless rods
• Made in USA.
• Sold individually.

See part CLA-GS0004-X2 for a more economical 2-pack.

Part Number: CLA-GS0004
Dimension Front-to-Back: 19 1/4”
Dimension Side-to-Side: 12”
Material: stainless steel
Weight: 8.5

Cast Iron Cooking Grids for Ducane model 30400040. TWO (2) PIECE SET. FIts Ducane, Meridian, JennAir.

Each panel measures 19 1/4” X 12”. Total width is 24".

Part Number: CG-75P-CI-X2
Dimension Front-to-Back: 19 1/4”
Dimension Side-to-Side: 12”
Material: cast iron
Weight: 15.90

Cast Iron Cooking Grid - Ducane, Meridian, JennAir for Ducane model 30400040.

Part Number: CG-75P-CI
Dimension Front-to-Back: 19 1/4”
Dimension Side-to-Side: 12”
Material: cast iron
Weight: 7.95

Stainless steel Flame Tamers for Ducane model 30400040. SET OF THREE (3). Fits Ducane 3-burner stainless models sold at Home Depot and elsewhere. May fit other models. Made in USA.

NOTE: Sometimes shipped with vinyl peel-off coating. Remove before use.

Part Number: CLA-TS0011-X3
Dimension Front-to-Back: 16 7/8”
Dimension Side-to-Side: 6 7/8”
Material: stainless steel
Weight: 3.6

Stainless steel Flame Tamer for Ducane model 30400040. Fits Ducane 3-burner stainless models sold at Home Depot and elsewhere. Made in USA. Sold individually.

Also available in 3-packs.

NOTE: Sometimes shipped with vinyl peel-off coating. Remove before use.

Part Number: CLA-TS0011
Dimension Front-to-Back: 16 7/8”
Dimension Side-to-Side: 6 7/8”
Material: stainless steel
Weight: 1.2

Stainless Steel Tank Heat Shield. Made in USA

Part Number: CLA-MS0313
Dimensions: 13 11/16” x 13 1/2”
Material: Stainless Steel
Weight: 1.8

Single Output Igniton Module. Fits many brands. Uses 1 AAA battery (not included).

For more information about ignition systems and components, please see article Ignition 101 in our help center.

Part Number: IGEIB15-B
Weight: 0.20

Universal 2 5/16” knob.

• Selectable D-Value
• Selectable socket diameter - 6mm or 8mm.
• Selectable shaft length - flush, 1/4”, or 1 5/8”. Shafts can also be trimmed to desired length.
• Includes 6 shaft inserts and set screw.
• Fits any grill with inside bezel diameter greater than 2 5/16” (the knob diameter).

Part Number: 02342
Dimensions: 2 5/16” x 2 5/16”
Material: plastic
Weight: 0.20

Flame thrower valve for LP grills. 15,000 BTU.

• Orifice included
• 30° angle
• Includes clamp and screws

Part Number: CLA-VL0231
Material: aluminum/brass
Weight: 0.50

#63 orifice for infrared burner CLA-BL0229; use on liquid propane (LP) gas grills. Includes brass elbow with 1/4” compression fitting.

Part Number: CLA-VB0245
Dimensions: 3 3/8” x 17 1/4”
Material: stainless steel and ceramic
Weight: 0.3

#55 orifice for infrared burners use on natural Gas grills. Includes brass elbow with 1/4” compression fitting.

Part Number: CLA-VB0246
Dimensions: 3 3/8” x 17 1/4”
Material: stainless steel and ceramic
Weight: 0.3

Fish Spatula. Stainless steel fish spatula with genuine rosewood handle. 18 1/2”. 10” spatula width.

Part Number: FS-1
Dimensions: 18 1/2
Material: stainless steel
Weight: 1.0

Basting brush with angled oak handle. 18” overall length.

Part Number: BB-5
Dimensions: 18
Weight: 0.8

18” long wood handle brass bristle grid brush with scraper and leather hang strap.

Part Number: WB-3
Dimensions: 18
Weight: 0.59