Amana AM30 Grill Parts

Amana AM30

Amana SS 4-Burner LP gas grill

Highest quality replacement parts for your Amana AM30 - Free USA shipping $49 or more* - No Sales Tax*

Amana AM30 owners manual and diagrams

Click the small images on the right to view Amana AM30 exploded parts diagrams and parts lists. Owners manual not available. If you have a manual you're willing to share, please click here to send us an email with the attached manual. Thank You!

Amana AM30-3775946-PartsExpS1.gif

Amana AM30-3775946-PartsExpS2.gif

Replacement gas grill parts for Amana model: AM30

This page shows all of the parts we know fit model Amana AM30. We might not show the part you need here but we may still have it, or a functional equivalent. In this case, try the category buttons on the right. For example, if your looking for an ignitor, or other ignition components, and there are none here, click the ignition button to see what we have for Amana grills. Knowing the dimensions of your existing part will help you find the right part.

To get the correct Amana AM30 BBQ parts

You should measure your existing parts and compare them to what we show here. This is best done with them removed from the grill.
Verify your Amana model number by checking the CSA appliance tag on your grill to make sure you have the correct model number. Do not rely solely on the owners manual as these are frequently mixed up at retail stores when the grills are assembled. You'd be surprised at how many folks have the wrong owners manual.

AM30 Burners

FCTG2608013 / AMT1

Click for photos

Stainless steel burner for Amana model AM30. Sold individually, number required varies.

Part Number: AMT1 (Replaces Amana FCTG2608013)
Dimensions: 17 1/8” x 1”
Material: stainless steel
Weight: 0.6

==> All Amana Burners.

AM30 Cooking Grids

FCTG2908009 / 50263

Click for photos

Porcelain steel cooking grids for Amana model AM30. SET OF THREE (3).

Porcelain enameled, glossy finish
3 panels, each 17 1/2” x 8 5/8”
Total width: 25 7/8”

Part Number: 50263 (Replaces Amana FCTG2908009)
Dimension Front-to-Back: 17 1/2”
Dimension Side-to-Side: 25 7/8”
Material: porcelain steel wire
Weight: 10.8

53S33

Click for photos

Stainless steel cooking grids with solid 1/4” rods (set of 3) for Amana model AM30.

Part Number: 53S33
Dimension Front-to-Back: 17 1/2”
Dimension Side-to-Side: 27 3/8”
Material: stainless steel wire
Weight: 10.0

==> All Amana Cooking Grids.

AM30 Heat Plates

CLA-TS0152-X3

Click for photos

SET OF THREE/3 PACK Flavor Grid, stainless steel for Amana model AM30. Made in USA.

NOTE: Sometimes shipped with protective vinyl peel-off coating. Remove before use.

Part Number: CLA-TS0152-X3
Dimension Front-to-Back: 15”
Dimension Side-to-Side: 3 1/2”
Material: stainless steel
Weight: 3.6

CLA-TS0152-X4

Click for photos

SET OF FOUR/4 PACK Flavor Grid, stainless steel for Amana model AM30. Made in USA.

NOTE: Sometimes shipped with protective vinyl peel-off coating. Remove before use.

Part Number: CLA-TS0152-X4
Dimension Front-to-Back: 15”
Dimension Side-to-Side: 3 1/2”
Material: stainless steel
Weight: 4.8

FCTG2908026 / AMHP1

Click for photos

Stainless Flavor Grid (heat plate/Flame Tamer) for Amana model AM30. Sold individually, number required varies.

Part Number: AMHP1 (Replaces Amana FCTG2908026)
Dimension Front-to-Back: 15”
Dimension Side-to-Side: 3 7/16”
Material: stainless steel
Weight: 1.0

==> All Amana Heat Plates.

AM30 Igniter Components

TS-IG4010

Click for photos

Push-button electronic igniter with four (4) spade connectors. Black cap. Uses one AAA battery (not included). Requires a 3/4” mounting hole.

For more information about ignition systems and components, please see article Ignition 101 in our help center.

Part Number: TS-IG4010
Weight: 0.2

10342-T12

Click for photos

21” wire for side burner or other applications. Both ends are female spade connector.

For more information about ignition systems and components, please see article Ignition 101 in our help center.

Part Number: 10342-T12
Dimensions: 21
Weight: 0.05

IG-25B

Click for photos

Ceramic electrode with mounting bracket. For use with triple burner assembly part# SONT3 and ALTT3.

Sold individually, two (2) required
Use old screws and support plate

For more information about ignition systems and components, please see article Ignition 101 in our help center.

Part Number: IG-25B
Weight: 0.3

IGEIB4-B

Click for photos

Battery powered push button igniter.

Has four (4) spade type male connectors.
Uses 1 AAA battery (not supplied)
Requires 3/4” or 13/16” mounting hole.

For more information about ignition systems and components, please see article Ignition 101 in our help center.

Part Number: IGEIB4-B
Weight: 0.3

IG-30B

Click for photos

46” Wire with female spade connectors and square plastic connectors.

For more information about ignition systems and components, please see article Ignition 101 in our help center.

Part Number: IG-30B
Dimensions: 46
Weight: 0.1

IG-48B

Click for photos

16” Universal Ignitor Wire

For more information about ignition systems and components, please see article Ignition 101 in our help center.

Part Number: IG-48B
Dimensions: 16
Weight: 0.05

06730

Click for photos

Ceramic electrode and 40” wire with female spade connector.

For more information about ignition systems and components, please see article Ignition 101 in our help center.

Part Number: 06730
Material: ceramic
Weight: 0.1

==> All Amana Igniter Components.

AM30 Heat indicators and Meat Thermometers

FCCS0007030 / 00013

Click for photos

heat indicator

Part Number: 00013 (Replaces Amana FCCS0007030)
Dimensions: 3 3/8” x 2 1/16”
Weight: 0.2

==> All Amana Heat indicators and Meat Thermometers.

AM30 Miscellaneous Repair Parts

CLA-MS0303

Click for photos

2-Burner Z bar.

Replaces OEM part# 40335008
Stainless steel
Made in USA

Part Number: CLA-MS0303
Dimensions: 3 5/8” x 7 7/16”
Material: Stainless Steel
Weight: 0.25

==> All Amana Miscellaneous Repair Parts.

AM30 Accessories

WB-8RH

Click for photos

Replacement brass bristle brush head for WB-8 brush. Screws included.

Part Number: WB-8RH
Dimensions: 18 1/2
Material: stainless steel
Weight: 0.2

==> All AM30 Accessories.

BBQ Part Categories

Amana model AM30 - Sunday, Jan 26 2025

Return to Amana grills main page

More Amana grill models we have parts for
AM26LP \| AM26LP-P \| AM27LP \| AM30LP \| AM30LP-P \| AM33 \| AM33LP \| AM33LP-P \| SF27 \| SS4 \| SS5 \|

*Orders for Amana grill model AM30 $49 and over ship free to the lower 48 states.
See shipping policy below for more info.

Home | About Us | Contact Us | Privacy Policy | Shipping Policy | Return Policy
January 26, 2025