Aussie Vantage 6804S8-S11 Grill Parts

Highest quality replacement parts for your Aussie Vantage 6804S8-S11 - Free USA shipping $49 or more* - No Sales Tax*

Aussie 6804S8-S11 owners manual and diagrams

Click the small images on the right to view Aussie 6804S8-S11 exploded parts diagrams and parts lists. Owners manual not available. If you have a manual you're willing to share, please click here to send us an email with the attached manual. Thank You!

Aussie 6804S8-S11-33196611188839-PartsExpS1.gif

Aussie 6804S8-S11-33196611188839-PartsLstS1.gif

Replacement grill parts for Aussie Vantage (6804S8-S11)

This page shows all of the parts we know fit model Aussie 6804S8-S11. If you can't find the part you need below, click on the appropriate category button on the right side of the page. For example, if your looking for an ignitor, or other ignition components, and there are none here, click the ignition button to see what we have for Aussie grills. Knowing the dimensions of your existing part will help you find the right part.

To get the correct Aussie 6804S8-S11 BBQ parts

You should measure your existing parts and compare them to what we show here. This is best done with them removed from the grill.
Verify your Aussie model number by checking the CSA appliance tag on your grill to make sure you have the correct model number. Do not rely solely on the owners manual as these are frequently mixed up at retail stores when the grills are assembled. You'd be surprised at how many folks have the wrong owners manual.

6804S8-S11 Burners

Click for photos

Stainless steel burner for Aussie model 6804S8-S11.

Part Number: 16801
Dimensions: 17 3/8” x 1”
Material: stainless steel
Weight: 0.8

==> All Aussie Burners.

6804S8-S11 Cooking Grids

Click for photos

Cast iron cooking grids for Aussie model 6804S8-S11. Porcelain treated, flat matte finish. Sold as a set of two (2).

Part Number: 64252
Dimension Front-to-Back: 17 1/4”
Dimension Side-to-Side: 28 1/8”
Material: matte cast iron
Weight: 13.12

==> All Aussie Cooking Grids.

6804S8-S11 Heat Plates

Click for photos

SET OF FOUR/4 PACK Stainless steel Heat Distribution Plates for Aussie model 6804S8-S11. Made in USA.

NOTE: Sometimes shipped with vinyl peel-off coating. Remove before use.

Part Number: CLA-TS0135-X4
Dimension Front-to-Back: 15 5/16”
Dimension Side-to-Side: 3 7/8”
Material: stainless steel
Weight: 2.64

Click for photos

Stainless steel Heat Distribution Plate / Flame Tamer for Aussie model 6804S8-S11.

Part Number: CHMBHP3
Dimension Front-to-Back: 15 3/8”
Dimension Side-to-Side: 3 15/16”
Material: stainless steel
Weight: .66

==> All Aussie Heat Plates.

6804S8-S11 Igniter Components

Click for photos

Push-button electronic igniter with three (3) spade connectors. Comes with sliver or black cap per availability. Needs (1) AA battery (not included); requires 7/8” mounting hole.

For more information about ignition systems and components, please see article Ignition 101 in our help center.

Part Number: TS-IG3007
Weight: 0.2

Click for photos

electrode

For more information about ignition systems and components, please see article Ignition 101 in our help center.

Part Number: 06840
Dimensions: 5 7/8
Material: ceramic
Weight: 0.7

Click for photos

Universal three-outlet battery powered push button ignitor.

1.5 volt
Has three (3) terminals (male spade connector)
Uses a single AA battery (not included)
03610 and 03620 wires are commonly used with this igniter (not included)
Requires 7/8” mounting hole

For more information about ignition systems and components, please see article Ignition 101 in our help center.

Part Number: 03333
Dimensions: 2 9/16” x 2”
Weight: 0.5

==> All Aussie Igniter Components.

6804S8-S11 Heat indicators and Meat Thermometers

Click for photos

Oval lid heat indicator. Mounts to grill with single 1.25” long threaded temperature probe in center.

Part Number: 072-6800-0
Dimensions: 2 15/16” x 1 7/8”
Material: stainless steel
Weight: 0.2

==> All Aussie Heat indicators and Meat Thermometers.

6804S8-S11 Accessories

Click for photos

Stainless steel flipper. The ultimate spatula tool, specially curved for perfect flips every time. 18” overall.

Part Number: SF-1
Dimensions: 18
Material: stainless steel
Weight: 0.4

Click for photos

EZ Check Gas level indicator. Accurate from -22° to 104°F. Magnetic back. Works on all sizes of tanks.

Part Number: 00030
Weight: 0.1

Scrub brushes. Plastic grill scrubber. Cleans all types of cooking grids. Plastic grip handle.

Part Number: WB-7
Dimensions: 6” x 3 1/2”
Weight: 0.2

==> All 6804S8-S11 Accessories.

BBQ Part Categories

Aussie grill 6804S8-S11 - Thursday, Sep 5 2024

Return to Aussie grills main page

More Aussie grill models we have parts for
6112S8X641 \| 6122S8X641 \| 6212S00T91 \| 6212S00T91001484 \| 6480-DS \| 6623S8E641 \| 6623S8Y641 \| 6703C8FKK1 \| 6703T8DV31 \| 67A4T09K21 \| 67C3C8KK81 \| 6804 \| 6804T8KSS1 \| 6804T8UK91 \| 6805 \| 6805-8SSS1 \| 69F6U00KS1 \| 7110.6.641 \| 7110.7.641 \| 7202 \| 7202BO-B21 \| 7202BO-M41 \| 7202KO-G21 \| 7262 \| 7262BO-B21 \| 7262BO-M21 \| 7262KO-G21 \| 7262KOXG21 \| 7302 \| 7302-0-581 \| 7302-2-581 \| 7302KO-G11 \| 7352-2-581 \| 7362 \| 7362B1XB11 \| 7362BO-B11 \| 7362BO-M11 \| 7362K3X-B11 \| 7362K3X-B41 \| 7362K6-B41 \| 7362KIXB41 \| 7362KO-B11 \| 7362KO-G11 \| 7362KOXG11 \| 7402 \| 7462 \| 7462BO-B11 \| 7462BO-M11 \| 7462K1-M11 \| Complete list of Aussie grill models...

More Aussie grill models we have parts for

6112S8X641 | 6122S8X641 | 6212S00T91 | 6212S00T91001484 | 6480-DS | 6623S8E641 | 6623S8Y641 | 6703C8FKK1 | 6703T8DV31 | 67A4T09K21 | 67C3C8KK81 | 6804 | 6804T8KSS1 | 6804T8UK91 | 6805 | 6805-8SSS1 | 69F6U00KS1 | 7110.6.641 | 7110.7.641 | 7202 | 7202BO-B21 | 7202BO-M41 | 7202KO-G21 | 7262 | 7262BO-B21 | 7262BO-M21 | 7262KO-G21 | 7262KOXG21 | 7302 | 7302-0-581 | 7302-2-581 | 7302KO-G11 | 7352-2-581 | 7362 | 7362B1XB11 | 7362BO-B11 | 7362BO-M11 | 7362K3X-B11 | 7362K3X-B41 | 7362K6-B41 | 7362KIXB41 | 7362KO-B11 | 7362KO-G11 | 7362KOXG11 | 7402 | 7462 | 7462BO-B11 | 7462BO-M11 | 7462K1-M11 | Complete list of Aussie grill models...