Broil-Mate 765064 Grill Parts

Highest quality replacement parts for your Broil-Mate 765064 - Free USA shipping $49 or more* - No Sales Tax*

Broil-Mate 765064 owners manual and diagrams

Diagrams & owners manual not available for grill model# 765064. If you have a manual you're willing to share, please click here to send us an email with the attached manual. Thank You!

Replacement BBQ grill parts for Broil-Mate model: 765064

On this page you'll find all of the parts that fit model Broil-Mate 765064. If you can't find the part you need below, click on the appropriate category button on the right side of the page. For example, if your looking for a cooking grid and there are none here, click the cooking grids button to see all of the cooking grids we have for Broil-Mate grills. Knowing the dimensions of your existing part will help you find the right part.

To get the correct Broil-Mate 765064 BBQ parts

You should measure your existing parts and compare them to what we show here. This is best done with them removed from the grill.
Verify your Broil-Mate model number by checking the CSA appliance tag on your grill to make sure you have the correct model number. Do not rely solely on the owners manual as these are frequently mixed up at retail stores when the grills are assembled. You'd be surprised at how many folks have the wrong owners manual.

765064 Burners

52924-144

Click for photos

Genuine OEM Broil-Mate stainless steel burner replaces original part number 52904-144 (52904-144LP and 52904-144NG) for Broil-Mate model 765064. For LP grills, adjust air shutter to about 1/3 opened and for NG adjust about 2/3 open or more as needed.

Part Number: 52924-144
Dimensions: 15 3/4
Material: stainless steel
Weight: 0.8

10390-E10

Click for photos

Genuine OEM Broil-Mate Side Burner for Broil-Mate model 765064. Use air shutter to adjust for LP (less air flow) or natural gas (more air flow).

Part Number: 10390-E10
Weight: 0.4

==> All Broil-Mate Burners.

765064 Cooking Grids

COOKING GRID CAST IRON 330/440/550 (Sold individually; number required varies, check your grill for Broil-Mate model 765064.)

Part Number: 52002-181
Dimension Front-to-Back: 17 3/8”
Dimension Side-to-Side: 12 3/4”
Material: cast iron
Weight: 6.75

==> All Broil-Mate Cooking Grids.

765064 Heat Plates

52209-404

Click for photos

Genuine OEM Broil-Mate stainless steel Flav-R-Wave for Broil-Mate model 765064.

Part Number: 52209-404
Dimension Front-to-Back: 15 7/8”
Dimension Side-to-Side: 6”
Material: stainless steel
Weight: 1.14

==> All Broil-Mate Heat Plates.

765064 Igniter Components

52225-014A

Click for photos

Genuine stainless steel two piece collector box assembly. Consists of both upper and lower pieces.

For more information about ignition systems and components, please see article Ignition 101 in our help center.

Part Number: 52225-014A
Dimensions: 23
Material: stainless steel
Weight: 1.0

10342-E12

Click for photos

Genuine OEM Broil-Mate electrode with 11” connector wire that has a flat/spade female end; use with AA or AAA battery powered ignitors.

For more information about ignition systems and components, please see article Ignition 101 in our help center.

This part is currently out of stock, but more are already on the way and expected to arrive early Aug

Part Number: 10342-E12
Weight: 0.05

10342-246

Click for photos

Genuine OEM Broil-Mate electronic push-button 3-spade igniter.

Uses AAA battery (not included)
.Requires 3/4” mounting hole

For more information about ignition systems and components, please see article Ignition 101 in our help center.

Part Number: 10342-246
Weight: 0.6

10342-T18

Click for photos

Genuine OEM Broil-Mate 32” wire for side burner and other applications. Both ends are female spade connector.

For more information about ignition systems and components, please see article Ignition 101 in our help center.

Part Number: 10342-T18
Dimensions: 32
Weight: 0.05

==> All Broil-Mate Igniter Components.

765064 Grease Trays

57055-901

Click for photos

Grease tray 440; porcelain flatte matte finish.

Part Number: 57055-901
Dimensions: 6 3/4” x 25 7/16”
Material: porcelain steel
Weight: 1.25

52009-901

Click for photos

GREASE PAN - 330/440/550

Part Number: 52009-901
Dimensions: 5 1/8” x 6 1/2”
Weight: .40

22009-901

Click for photos

Genuine OEM Broil-Mate Porcelain Grease Pan.

Part Number: 22009-901
Dimensions: 6 1/2” x 5 1/8”
Weight: .45

==> All Broil-Mate Grease Trays.

765064 Knobs and Handles

24005-12A

Click for photos

LID-HANDLE BENT 500 430 SS. NOTE: The mounting holes, center to center, are 23 1/2” apart.

Part Number: 24005-12A
Dimensions: 25
Weight: .85

10472-K431

Click for photos

CONTROL KNOB RESIN LRG BLACK -- W/SS BA STRIP

Part Number: 10472-K431
Weight: 0.1

10472-K231

Click for photos

CONTROL KNOB SMALL W/BA STRIP.

Off position D-Value: 6 o'clock
Knob diameter: 1 7/8”
Socket diameter: 5/16”
Knob shaft: 1/2”

Part Number: 10472-K231
Weight: 0.1

==> All Broil-Mate Knobs and Handles.

765064 Regulators and Hoses

HR-4B

Click for photos

Type 1 LP Regulator with 22” Pressure Hose and 3/8” Female Flare Fitting.FITS: Up to 60,000 BTUs

Part Number: HR-4B
Dimensions: 22
Weight: 0.8

==> All Broil-Mate Regulators and Hoses.

765064 Wheels and Castors

10892-608

Click for photos

Wheel 6” plastic with 3/8” axle hole.

Part Number: 10892-608
Weight: 0.2

10240-13

Click for photos

Wheel bolt 3.25” long; uses one hinge pin part number S21233 not included.

Part Number: 10240-13
Weight: .10

==> All Broil-Mate Wheels and Castors.

765064 Warming Racks

52005-991

Click for photos

WARMING RACK 440 PORC (back support rod 25 5/8” and front support rod 26 3/16” warming rack 7 3/8” x 25”).

Part Number: 52005-991
Dimensions: 25 5/8
Weight: 3.3

==> All Broil-Mate Warming Racks.

765064 Heat indicators and Meat Thermometers

10571-6

Click for photos

Genuine OEM Broil-Mate Heat indicator. About 2 3/8” wide and 2” high. The threaded stem is about 5 /16” diameter and 1 1/8” long.

Part Number: 10571-6
Weight: 0.12

==> All Broil-Mate Heat indicators and Meat Thermometers.

765064 Miscellaneous Repair Parts

Y-11230

Click for photos

Cotter pin

Part Number: Y-11230
Weight: 0.01

S21233

Click for photos

Hinge pin clip.

Part Number: S21233
Weight: 0.01

==> All Broil-Mate Miscellaneous Repair Parts.

765064 Hardware

SCREW-PHCP 6-32X1/4 TY-F JS500

Part Number: Y-12835
Weight: 1.0

Y-11231

Click for photos

LID BUMPER

Part Number: Y-11231
Weight: 0.01

==> All Broil-Mate Hardware.

765064 Accessories

SSST

Click for photos

Stainless steel smoker box with cover. For use with all grills. Insert moistened wood chips (not included) for your favorite smoke flavor, 8 3/4” x 3 1/2” x 1 1/2”.

Part Number: SSST
Material: stainless steel
Weight: 1.5

SF-1

Click for photos

Stainless steel flipper. The ultimate spatula tool, specially curved for perfect flips every time. 18” overall.

Part Number: SF-1
Dimensions: 18
Material: stainless steel
Weight: 0.4

WB-7

Scrub brushes. Plastic grill scrubber. Cleans all types of cooking grids. Plastic grip handle.

Part Number: WB-7
Dimensions: 6” x 3 1/2”
Weight: 0.2

==> All 765064 Accessories.

BBQ Part Categories

Broil-Mate gas grill 765064 - Thursday, Sep 5 2024

Return to Broil-Mate grills main page

More Broil-Mate grill models we have parts for

765384 | 765387 | 766054 | 766057 | 766064 | 766154 | 766157 | 766164 | 766167 | 766264 | 766267 | 766284 | 766287 | 766324 | 766327 | 766344 | 766347 | 766364 | 766367 | 766384 | 766387 | 7761-54 | 7761-57 | 7761-64 | 7761-67 | 7761-84 | 7761-87 | 7765-84 | 7765-87 | 7811-54 | 7811-57 | 7811-64 | 7811-67 | 781254 | 781254B | 781257 | 781257B | 781264 | 781264B | 781267 | 781267B | 7821-54 | 7821-57 | 7821-64 | 7821-67 | 7821-84 | 7821-87 | 7822-54 | 7822-57 | 7822-64 | Complete list of Broil-Mate grill models...

*Orders for Broil-Mate grill model 765064 $49 and over ship free to the lower 48 states.
See shipping policy below for more info.

Home | Contact Us | Privacy Policy | Return Policy | Shipping Policy | About Us
Date: Thursday, September 5, 2024