Grill-Parts home
 

Cascade X2000 Grill Parts

Cascade logo

 

Cascade X2000

Cascade 4-Burner LP gas grill with side burner, available at Kroger

 

Highest quality replacement parts for your Cascade X2000 - Free USA shipping $49 or more* - No Sales Tax*

 

Cascade X2000 owners manual and diagrams
Diagrams & owners manual not available for grill model# X2000. If you have a manual you're willing to share, please click here to send us an email with the attached manual. Thank You!

 


Replacement grill parts for Cascade model: X2000
On this page you'll find all of the parts that fit model Cascade X2000. If the part you're shopping for isn't included below, you might find it using the category buttons on the right side of the page. For example, if your looking for a warming rack and there are none here, click the warming rack button to see all of the racks we have for Cascade grills. You will need to know the dimensions of your existing grids to help you find the right part.

To get the correct Cascade X2000 BBQ parts
  • You should measure your existing parts and compare them to what we show here. This is best done with them removed from the grill.
  • Verify your Cascade model number by checking the CSA appliance tag on your grill to make sure you have the correct model number. Do not rely solely on the owners manual as these are frequently mixed up at retail stores when the grills are assembled. You'd be surprised at how many folks have the wrong owners manual.
 


X2000 Burners

AMT1
Click for photos
Stainless steel burner for Cascade model X2000. Sold individually, number required varies.

Part Number: AMT1
Dimensions: 17 1/8” x 1”
Material: stainless steel
Weight: 0.6

$35.35
 
Qty
 

==> All Cascade Burners.
 





X2000 Cooking Grids

CG-DUMMY
Cooking grid not known for Cascade model X2000. Our parts information for this grill model is incomplete, and we really don't know with certainty which cooking grid fits this model. It may be that we have the part but don't show it here due to data or other error.

If you know the original OEM part number, try searching for it in the search box at the top of this page.

You can also browse through all of the Cascade cooking grids we carry. If we don't have the exact fit grid for your grill, we may have a suitable replacement part. Measure your existing part as well as the the grid support area of the grill so you'll know exactly what size grids will fit.

If you have this grill model and know the number and dimensions of your original cooking grids, please share this information with us. Click here to send an email to our GrillDr that includes this information. We greatly appreciate your help.

Part Number: CG-DUMMY
Weight: 1.0
==> All Cascade Cooking Grids.
 





X2000 Heat Plates

CLA-TS0152-X3
Click for photos
SET OF THREE/3 PACK Flavor Grid, stainless steel for Cascade model X2000. Made in USA.

NOTE: Sometimes shipped with protective vinyl peel-off coating. Remove before use.

Part Number: CLA-TS0152-X3
Dimension Front-to-Back: 15”
Dimension Side-to-Side: 3 1/2”
Material: stainless steel
Weight: 3.6

$67.17
 
Qty
 

CLA-TS0152-X4
Click for photos
SET OF FOUR/4 PACK Flavor Grid, stainless steel for Cascade model X2000. Made in USA.

NOTE: Sometimes shipped with protective vinyl peel-off coating. Remove before use.

Part Number: CLA-TS0152-X4
Dimension Front-to-Back: 15”
Dimension Side-to-Side: 3 1/2”
Material: stainless steel
Weight: 4.8

$84.24
 
Qty
 

SONHP1
Click for photos
Stainless steel Flavor Grid for Cascade model X2000.

Part Number: SONHP1
Dimension Front-to-Back: 15 3/16”
Dimension Side-to-Side: 5 7/16”
Material: stainless steel
Weight: 0.6

$28.91
 
Qty
 

AMHP1
Click for photos
Stainless Flavor Grid (heat plate/Flame Tamer) for Cascade model X2000. Sold individually, number required varies.

Part Number: AMHP1
Dimension Front-to-Back: 15”
Dimension Side-to-Side: 3 7/16”
Material: stainless steel
Weight: 1.0

$24.70
 
Qty
 

==> All Cascade Heat Plates.
 





X2000 Igniter Components

TS-IG4010
Click for photos
Push-button electronic igniter with four (4) spade connectors. Black cap. Uses one AAA battery (not included). Requires a 3/4” mounting hole.

For more information about ignition systems and components, please see article Ignition 101 in our help center.



Part Number: TS-IG4010
Weight: 0.2

$18.48
 
Qty
 

10342-T12
Click for photos
21” wire for side burner or other applications. Both ends are female spade connector.

For more information about ignition systems and components, please see article Ignition 101 in our help center.



Part Number: 10342-T12
Dimensions: 21
Weight: 0.05

$4.21
 
Qty
 

IG-25B
Click for photos
Ceramic electrode with mounting bracket. For use with triple burner assembly part# SONT3 and ALTT3.
  • Sold individually, two (2) required
  • Use old screws and support plate

For more information about ignition systems and components, please see article Ignition 101 in our help center.



Part Number: IG-25B
Weight: 0.3

$13.34
 
Qty
 

IGEIB4-B
Click for photos
Battery powered push button igniter.
  • Has four (4) spade type male connectors.
  • Uses 1 AAA battery (not supplied)
  • Requires 3/4” or 13/16” mounting hole.

For more information about ignition systems and components, please see article Ignition 101 in our help center.



Part Number: IGEIB4-B
Weight: 0.3

$34.08
 
Qty
 

IG-30B
Click for photos
46” Wire with female spade connectors and square plastic connectors.

For more information about ignition systems and components, please see article Ignition 101 in our help center.



Part Number: IG-30B
Dimensions: 46
Weight: 0.1

$7.10
 
Qty
 

IG-48B
Click for photos
16” Universal Ignitor Wire

For more information about ignition systems and components, please see article Ignition 101 in our help center.



Part Number: IG-48B
Dimensions: 16
Weight: 0.05

$6.00
 
Qty
 

06730
Click for photos
Ceramic electrode and 40” wire with female spade connector.

For more information about ignition systems and components, please see article Ignition 101 in our help center.



Part Number: 06730
Material: ceramic
Weight: 0.1

$9.25
 
Qty
 

==> All Cascade Igniter Components.
 





X2000 Warming Racks

CLA-WS0040
Click for photos
Universal premium quality stainless steel warming rack. You simply can't buy a better quality warming rack than this, which weighs in at almost 5lbs of solid 304 grade stainless steel. This super heavy-duty warming rack was made to replace the porcelain coated steel racks found on BBQ grills made by The Great Outdoors Grill Company, but can be used in many other different grills.
  • Far superior to the original porcelain coated steel rack
  • Rests on your existing cooking grids.
  • Solid 1/4” 304 stainless steel rods.
  • Stands 3.75 inches tall.
  • Made in USA.

WARNING: Before ordering this universal rack, please verify your grill has enough space to accommodate it. If you need to return, you will be responsible for return shipping, and the original out bound shipping fee will be deducted from the refund. What's required?
  • Your grill needs to be at least 24” wide on the inside . The warming rack is 6.25” front to back and stands 3.75” tall.
  • Notice the shape of the warming rack. Determine if the lid of your grill can easily close with the warming rack inside along with food placed on top of the rack.

    Part Number: CLA-WS0040
    Dimensions: 6 1/4” x 22 7/8”
    Material: stainless steel
    Weight: 4.8

$71.75
 
Qty
 

==> All Cascade Warming Racks.
 





X2000 Accessories

WB-1
12” long wood handle brass bristle grid brush with scraper and leather hang strap.

Part Number: WB-1
Dimensions: 12
Weight: 0.4

$10.90
 
Qty
 

==> All X2000 Accessories.
 



BBQ Part Categories










 
 

Cascade grill X2000 - Sunday, Jan 26 2025

Return to Cascade grill parts main page



More Cascade grill models we have parts for
CG29S-1 | TS29LP |



*Orders for Cascade grill model X2000 $49 and over ship free to the lower 48 states.
See shipping policy below for more info.


Home | About Us | Contact Us | Privacy Policy | Shipping Policy | Return Policy
January 26, 2025