Charbroil Commercial 463241313 Grill Parts

Stainless steel burner for Charbroil model 463241313.

Part Number: 14741
Dimensions: 15 15/16” x 1”
Material: stainless steel
Weight: 0.5

Stainless steel cross-over burner.

Part Number: 05596 (Replaces Charbroil G354-0024-W1)
Dimensions: 8 1/2” x 0 3/4”
Material: stainless steel
Weight: 0.1

Cast iron cooking grids for Charbroil model 463241313. Porcelain treated, flat matte finish. Sold as a set of three (3).

Part Number: 61123
Dimension Front-to-Back: 18 5/16”
Dimension Side-to-Side: 24 15/16”
Material: matte cast iron
Weight: 19.2

Infrared Emitter and Cast Iron Cooking Grate set for Charbroil model 463241313. This set of two pieces replaces the Charbroil infrared emitter tray (IR housing) AND the cast iron cooking grate.

Includes:

• One (1) CG-111SS stainless steel Emitter Tray
• One (1) CG-111PCI cast iron cooking grate 18 1/4” x 8 1/4”.

CG-111PCI grid rests on top of emitter tray CG-111SS. Multiple sets required, number varies by grill model.

Part Number: CG-111SET
Dimension Front-to-Back: 18 1/4”
Dimension Side-to-Side: 8 7/8”
Material: stainless steel
Weight: 8.25

Cast iron cooking grids for Charbroil model 463241313. SET OF TWO (2) panels.

• Porcelain treated, matte finish
• Each panel measures 18 1/4” x 8 1/4”
• Overall dimensions: 18 1/4” x 16 1/2”

Part Number: CG-111PCI-X2 (Replaces Charbroil 80021355)
Dimension Front-to-Back: 18 1/4”
Dimension Side-to-Side: 8 1/4”
Material: cast iron
Weight: 13.0

Infrared Cooking Grate Emitter for Charbroil model 463241313. This replaces the Charbroil infrared emitter tray which, when paired with our CG-111PCI Cast Iron Cooking Grate, radiates and transmits heat to grill food without exposure to flame. If the part is heavily rusted or damaged it needs to be replaced.

CG-111SS stainless steel emitter is sold individually—more than one may be required for your grill. This emitter tray is designed to be paired with CG-111P-CI cast iron cooking grate—which is sold separately.

See part CG-111SET for an emitter and grate sold as a set of two.

Part Number: CG-111SS (Replaces Charbroil 80021356)
Dimension Front-to-Back: 18 1/4”
Dimension Side-to-Side: 8 7/8”
Material: stainless steel
Weight: 1.75

Infrared slotted stamped stainless steel cooking grid set that features slotted grease drain holes for improved performance for Charbroil model 463241313.

• SET OF THREE (3)
• Each panel measures 18 7/16” x 8 7/8”
• Overall dimensions: 18 7/16” x 26 5/8”

Part Number: CG-97SS-X3
Dimension Front-to-Back: 18 7/16”
Dimension Side-to-Side: 26 5/8”
Material: stamped stainless steel
Weight: 7.65

Grate Emitter Housing tray Charbroil with Cooking grid for Charbroil model 463241313. Includes ONLY TWO PIECES (1) grate emitter housing tray and (1) cooking grid that fits into the tray. Number required varies, check your grill to be sure.

Part Number: CG-90SET
Dimension Front-to-Back: 18 3/8”
Dimension Side-to-Side: 8 11/16”
Material: stainless steel
Weight: 6.1

Porcelain steel Heat Tent for Charbroil model 463241313. Sold individually.

Part Number: 97321 (Replaces Charbroil G527-0013-W1)
Dimension Front-to-Back: 16 7/16”
Dimension Side-to-Side: 3 3/4”
Material: porcelain steel
Weight: 0.7

Ignition module switch for spark generators that accept wired remote (button) trigger switches. Fits our spark generator part numbers 03322, 03332, 03344, 03352, 03356, 03387 and 03388.
Includes:

• Push-button ignition module switch with two male spade connectors on back
• Two 20” wires with female spade connectors
• One plastic mounting nut

For more information about ignition systems and components, please see article Ignition 101 in our help center.

Part Number: 03152
Dimensions: 17 3/4” x 1”
Weight: 0.1

Universal 2 3/4” adaptor wire with a round female end and a male spade end that has a protective cover.

For more information about ignition systems and components, please see article Ignition 101 in our help center.

Part Number: 03199C
Weight: 0.05

Electrode, gas collector box, and wire. The connecting wire has a flat female spade connector, which is typically used with electronic (battery operated) ignitors (see Ignition 101 in our help center).

NOTE: This electrode is also sometimes used with push-button or rotary piezo ignitors, such as our part# 03100 and 03120, which have round connectors. When connecting 01472 electrode to ignitors with round connectors, use short wire part# 03199C to convert the electrode wire from a femal spade connector to a female round connector.

Part Number: 01472 (Replaces Charbroil G350-0064-W1)
Material: ceramic
Weight: 0.1

Battery powered ignitor/spark generator for Surefire electronic ignition systems using remote button/trigger.

• 1.5 volt
• Has four(4) spark outlets (male spade connector)
• Has two (2) male spade connectors for trigger (button) part #03152 (sold separately)
• Uses a single AA battery (not included)
• Requires 7/8” mounting hole

NOTE: The battery cap is not a push button. The ignitor is fired by a remote button/switch.

For more information about ignition systems and components, please see article Ignition 101 in our help center.

Part Number: 03344 (Replaces Charbroil G511-0055-W1)
Dimensions: 2” x 2 1/2”
Weight: 0.5

Semi-circular, snap in heat indicator with 3 3/4” heat prob.

Part Number: 00472 (Replaces Charbroil G527-0012-W1)
Dimensions: 1 3/4” x 1 1/4”
Material: stainless steel
Weight: 0.01

EZ Check Gas level indicator. Accurate from -22° to 104°F. Magnetic back. Works on all sizes of tanks.

Part Number: 00030
Weight: 0.1

12” long wood handle brass bristle grid brush with scraper and leather hang strap.

Part Number: WB-1
Dimensions: 12
Weight: 0.4