Coleman Revolution G53202 Grill Parts

Highest quality replacement parts for your Coleman Revolution G53202 - Free USA shipping $49 or more* - No Sales Tax*

Coleman G53202 owners manual and diagrams

Diagrams & owners manual not available for grill model# G53202. If you have a manual you're willing to share, please click here to send us an email with the attached manual. Thank You!

Replacement grill parts for Coleman Revolution (G53202)

On this page you'll find all of the parts that fit model Coleman G53202. If you can't find the part you need below, click on the appropriate category button on the right side of the page. For example, if your looking for a cooking grid and there are none here, click the cooking grids button to see all of the cooking grids we have for Coleman grills. Knowing the dimensions of your existing part will help you find the right part.

To get the correct Coleman G53202 BBQ parts

You should measure your existing parts and compare them to what we show here. This is best done with them removed from the grill.
Verify your Coleman model number by checking the CSA appliance tag on your grill to make sure you have the correct model number. Do not rely solely on the owners manual as these are frequently mixed up at retail stores when the grills are assembled. You'd be surprised at how many folks have the wrong owners manual.

G53202 Burners

14771

Click for photos

stainless steel burner for Coleman model G53202.

Part Number: 14771
Dimensions: 16 11/16” x 1”
Material: stainless steel
Weight: 0.6

==> All Coleman Burners.

G53202 Burner Brackets and Carryovers

05301

Click for photos

stainless steel cross-over

Part Number: 05301
Dimensions: 8 5/8” x 0 7/8”
Material: stainless steel
Weight: 0.2

==> All Coleman Burner Brackets and Carryovers.

G53202 Cooking Grids

65253

Click for photos

Cast iron cooking grids for Coleman model G53202. Porcelain treated, flat matte finish. Sold as a set of three (3).

Part Number: 65253
Dimension Front-to-Back: 18 3/8”
Dimension Side-to-Side: 26 7/16”
Material: matte cast iron
Weight: 16.5

==> All Coleman Cooking Grids.

G53202 Heat Plates

CLA-TS0157-X3

Click for photos

SET OF THREE/3 PACK Stainless steel heat plate/Flame Tamer for Coleman model G53202. Made in USA.

NOTE: Sometimes shipped with vinyl peel-off coating. Remove before use.

Part Number: CLA-TS0157-X3
Dimension Front-to-Back: 14 9/16”
Dimension Side-to-Side: 3 1/4”
Material: stainless steel
Weight: 2.16

CLA-TS0157-X4

Click for photos

SET OF FOUR/4 PACK Stainless steel heat plate/Flame Tamer for Coleman model G53202. Made in USA.

NOTE: Sometimes shipped with vinyl peel-off coating. Remove before use..

Part Number: CLA-TS0157-X4
Dimension Front-to-Back: 14 9/16”
Dimension Side-to-Side: 3 1/4”
Material: stainless steel
Weight: 2.88

97371-X6

Click for photos

Porcelain steel Flame Tamers for Coleman model G53202. SET OF SIX.

Part Number: 97371-X6
Dimension Front-to-Back: 14 9/16”
Dimension Side-to-Side: 3 1/4”
Material: porcelain steel
Weight: 3.3

GMNGHP1

Click for photos

Grillmaster Heat Plate for Coleman model G53202.

Part Number: GMNGHP1
Dimension Front-to-Back: 14 1/4”
Dimension Side-to-Side: 3 3/8”
Material: stainless steel
Weight: 0.81

==> All Coleman Heat Plates.

G53202 Igniter Components

01472

Click for photos

Electrode, gas collector box, and wire. The connecting wire has a flat female spade connector, which is typically used with electronic (battery operated) ignitors (see Ignition 101 in our help center).

NOTE: This electrode is also sometimes used with push-button or rotary piezo ignitors, such as our part# 03100 and 03120, which have round connectors. When connecting 01472 electrode to ignitors with round connectors, use short wire part# 03199C to convert the electrode wire from a femal spade connector to a female round connector.

Part Number: 01472
Material: ceramic
Weight: 0.1

03153

Click for photos

round trigger switch for AA and AAA spark generators; use original wires

For more information about ignition systems and components, please see article Ignition 101 in our help center.

Part Number: 03153
Dimensions: 17 3/4” x 1”
Weight: 0.1

03199C

Click for photos

Universal 2 3/4” adaptor wire with a round female end and a male spade end that has a protective cover.

For more information about ignition systems and components, please see article Ignition 101 in our help center.

Part Number: 03199C
Weight: 0.05

03372

Click for photos

2-outlet AA spark generator

For more information about ignition systems and components, please see article Ignition 101 in our help center.

Part Number: 03372
Weight: 0.5

==> All Coleman Igniter Components.

G53202 Warming Racks

CLA-WS0040

Click for photos

Universal premium quality stainless steel warming rack. You simply can't buy a better quality warming rack than this, which weighs in at almost 5lbs of solid 304 grade stainless steel. This super heavy-duty warming rack was made to replace the porcelain coated steel racks found on BBQ grills made by The Great Outdoors Grill Company, but can be used in many other different grills.

Far superior to the original porcelain coated steel rack
Rests on your existing cooking grids.
Solid 1/4” 304 stainless steel rods.
Stands 3.75 inches tall.
Made in USA.

WARNING: Before ordering this universal rack, please verify your grill has enough space to accommodate it. If you need to return, you will be responsible for return shipping, and the original out bound shipping fee will be deducted from the refund. What's required?

Your grill needs to be at least 24” wide on the inside . The warming rack is 6.25” front to back and stands 3.75” tall.
Notice the shape of the warming rack. Determine if the lid of your grill can easily close with the warming rack inside along with food placed on top of the rack.

Part Number: CLA-WS0040
Dimensions: 6 1/4” x 22 7/8”
Material: stainless steel
Weight: 4.8

==> All Coleman Warming Racks.

G53202 Heat indicators and Meat Thermometers

00020

Click for photos

Round heat indicator.

Single probe
3 1/8” diameter
Requires .60” mounting hole

WARNING: Please remove your old heat indicator and inspect how it is fitted onto the hood of your grill. This heat indicator has a .44” thread length; a wing nut is included. The overall length of the probe from the base of the back-side to the end of the probe measures 1 1/2".

Part Number: 00020
Dimensions: 3 1/8” x 3 1/8”
Weight: .20

==> All Coleman Heat indicators and Meat Thermometers.

G53202 Accessories

SSST

Click for photos

Stainless steel smoker box with cover. For use with all grills. Insert moistened wood chips (not included) for your favorite smoke flavor, 8 3/4” x 3 1/2” x 1 1/2”.

Part Number: SSST
Material: stainless steel
Weight: 1.5

40259

Click for photos

15” Stainless steel tong.

Soft comfort grip
Locking mechanism

Part Number: 40259
Dimensions: 15
Material: stainless steel
Weight: 0.14

==> All G53202 Accessories.

BBQ Part Categories

Coleman grill G53202 - Thursday, Sep 5 2024

Return to Coleman grills main page

More Coleman grill models we have parts for

Powerhouse 60 | Powerhouse 65 | Powerhouse 70 | Powerhouse 75 | Powerhouse Plus 20 | Powerhouse Plus 25 | Powerhouse Plus 30 | Powerhouse Plus 35 | Powerhouse Plus 40 | Powerhouse Plus 45 | Powerhouse Plus 50 | Powerhouse Plus 55 | Powerhouse Plus 60 | Powerhouse Plus 65 | Powerhouse Plus 70 | Powerhouse Plus 75 | Revolution 2-burner | Revolution 3-burner | Revolution 4-burner | Sierra | 2000 | 3000 | 5100 | 5110 | 5300 | 5310 | 85-3026-0 | 85-3027-8 | 85-3028-6 | 85-3029-4 | 85-3046-2 | 85-3047-0 | 85-3066-4 | 85-3067-2 | 85-3068-0 | 85-3069-8 | 85-3074-4 | 85-3075-2 | 85-3076-0 | 85-3077-8 | 85-3092-0 | 85-3093-8 | 85-3114-0 | 85-3115-8 | 85-3118-2 | 85-3119-0 | 85-3120-4 | 85-3121-2 | 85-3139-2 | 85-3140-6 | Complete list of Coleman grill models...

*Orders for Coleman Revolution grill model G53202 $49 and over ship free to the lower 48 states.
See shipping policy below for more info.

Home | Contact Us | Privacy Policy | Return Policy | Shipping Policy | About Us
Date: Thursday, September 5, 2024