DCS DCS36-BQRS Grill Parts

304 Stainless steel 15,000 BTU infrared rotissierie burner for DCS model DCS36-BQRS. For use with both liquid propane (LP) and natural gas grills. Orifice not included. Use old orifice or purchase our orifice part# CLA-VL0251 for LP, or part# CLA-VB0246 for natural gas applications.

Dimensions:

• Maximum overall length, including mounting tab on one end: 20 7/8”
• Maximum width: 3 3/8”

Part Number: CLA-BS0250 (Replaces DCS DCS-210357)
Dimensions: 3 3/8” x 20”
Material: stainless steel and ceramic
Weight: 3.50

213466 SMOKER BRNR ASSY for DCS model DCS36-BQRS.

Stainless steel replacement smoker burner. Fits DCS DCS36, DCS36A, DCS48, DCS48A Professional Series grills. Replaces original DCS part# 213466.

.

Part Number: DCS-213466-R1 (Replaces DCS DCS-213466)
Dimensions: 18” x 1”
Material: stainless steel
Weight: 0.7

210348-RBURNER H 36/48 MAT PORC for DCS model DCS36-BQRS.
Cast iron replacement ”H” burner. Fits older DCS 36” and 48” Professional Series grills.

Replaces original DCS burner part# 210348.

NOTE: Also fits grills manufactured by Dynamic Cooking Systems (DCS) for other brands.

Includes Air Shutter part# DCS-210330-R.


Part Number: DCS-210348-R2 (Replaces DCS DCS-210348)
Dimensions: 20 1/2” x 6 1/4”
Material: cast iron
Weight: 15.2

210330-R Air shutter for DCS model DCS36-BQRS. Fits cast iron ”H” burners used on older DCS 27”, 36” and 48” Professional Series grills.

Replaces original DCS part# 210330.

NOTE: Sometimes shipped with vinyl peel-off coating. Remove before use.

Made in USA.

Part Number: DCS-210330-R (Replaces DCS DCS-210330)
Material: stainless steel
Weight: 0.05

212408-R GRILL RACK - 36/48 BBQ-BLK for DCS model DCS36-BQRS.

Heavy duty porcelain steel grill rack. Fits DCS36, DCS36A, DCS48, and DCS48A Professional Series gas grills.

• Replaces DCS factory part# 212408.
• Large diameter 5/16” porcelain steel rods.
• Sold individually.

Part Number: DCS-212408-R (Replaces DCS DCS-212408)
Dimension Front-to-Back: 20 1/2”
Dimension Side-to-Side: 10 7/16”
Material: porcelain steel
Weight: 10.11

212408-SS Heavy duty stainless steel grill rack for DCS model DCS36-BQRS. Fits DCS36, DCS36A, DCS48 and DCS48A Professional Series gas grills. Sometimes referred to as GRILL RACK - 36/48 BBQ-BLK.

• Replaces DCS factory part# 212408.
• Large diameter 5/16” stainless steel rods.
• Commercial grade 304 stainless steel.
• Sold individally.

Also see CG-79SS4 for a grid with notches at each corner.

Part Number: DCS-212408-SS
Dimension Front-to-Back: 20 1/2”
Dimension Side-to-Side: 10 3/8”
Material: stainless steel
Weight: 10.2

Premium stainless steel cooking grate for DCS model DCS36-BQRS. Replaces 20 1/2” DCS grates with notches at each corner.

• Made in USA
• Constructed of 304 ”commercial grade” stainless steel
• 5/16” solid stainless rods
• Individual cooking grid measures 20-1/2” x 10-7/16”
• Each grid features 4 notched corners
• Sold individually

Part Number: CG-79SS4
Dimension Front-to-Back: 20 1/2”
Dimension Side-to-Side: 10 7/16”
Material: stainless steel
Weight: 7.15

213949-R RADIANT W/A 36/48 BQ.
Stainless steel Lava Rock support. Fits DCS DCS36, DCS36A, DCS48, DCS48A Professional Series grills. These grills have the larger 20.5” cast iron H burners.

Replaces original DCS part# 213949.

• Sometimes shipped with vinyl peel-off coating. Remove before use.
• Made in USA
• Sold individually, number required varies

Part Number: DCS-213949-R (Replaces DCS DCS-213949)
Dimension Front-to-Back: 19”
Dimension Side-to-Side: 9 9/16”
Material: stainless steel
Weight: 2.2

210005-R LAVA ROCK.
Natural lava rock processed and screened for uniformity. For use with Support Rack/Radient 213524 and 213949.

NOTE: This is NOT a DCS product. The original DCS part was 4 pounds of Lava Rock. This is a 7lb bag manufactured by GrillPro.

Part Number: DCS-210005-R
Material: pumice
Weight: 7.5

Universal push-button igniter. Round male connector. Includes locking nut.

For more information about ignition systems and components, please see article Ignition 101 in our help center.

Part Number: UP-4B (Replaces DCS DCS-211551)
Weight: 0.3

DCS Electrode with wire.

For more information about ignition systems and components, please see article Ignition 101 in our help center.

Part Number: IG-37B (Replaces DCS DCS-210730)
Weight: 0.2

Universal 2 3/4” adaptor wire with a round female end and a male spade end that has a protective cover.

For more information about ignition systems and components, please see article Ignition 101 in our help center.

Part Number: 03199C
Weight: 0.05

46” Wire with female spade connectors and square plastic connectors.

For more information about ignition systems and components, please see article Ignition 101 in our help center.

Part Number: IG-30B
Dimensions: 46
Weight: 0.1

16” Universal Ignitor Wire

For more information about ignition systems and components, please see article Ignition 101 in our help center.

Part Number: IG-48B
Dimensions: 16
Weight: 0.05

Type 1 LP Regulator with 22” Pressure Hose and 3/8” Female Flare Fitting.FITS: Up to 60,000 BTUs

Part Number: HR-4B (Replaces DCS DCS-210819)
Dimensions: 22
Weight: 0.8

Brass valve for DCS.

• For LP and natural gas grills (see below)
• Off position D-Value: 12 o'clock
• Stem diameter: 8mm
• Orifice not included

NOTE: There is a set screw in the stem that allows this valve to be used in both LP or natural gas grills. The valve is shipped with the screw set in LP position. Turn the screw counterclockwise about seven turns for natural gas use.

Part Number: 30171 (Replaces DCS DCS-210733)
Dimensions: 3 7/16” x 1 5/16”
Material: brass
Weight: 0.3

#55 orifice for infrared burners use on natural Gas grills. Includes brass elbow with 1/4” compression fitting.

Part Number: CLA-VB0246
Dimensions: 3 3/8” x 17 1/4”
Material: stainless steel and ceramic
Weight: 0.3

#59 brass orifice for rotisserie burner. Fits liquid propane (LP) gas grills. Includes brass elbow with 1/4” compression fitting.

Part Number: CLA-VL0251
Material: brass
Weight: 0.15

EZ Check Gas level indicator. Accurate from -22° to 104°F. Magnetic back. Works on all sizes of tanks.

Part Number: 00030
Weight: 0.1

Stainless steel straight handle grill brush with replaceable head. Brass bristles and scarper. See part# WB-8RH for replacement grill brush heads. 18 1/2” long.

Part Number: WB-8
Dimensions: 18 1/2
Material: stainless steel
Weight: 0.8