Grill-Parts home
 

Dyna-Glo DGA480SSN-D Grill Parts

 

 

Highest quality replacement parts for your Dyna-Glo DGA480SSN-D - Free USA shipping $49 or more* - No Sales Tax*

 

Dyna-Glo DGA480SSN-D owners manual and diagrams
Diagrams & owners manual not available for grill model# DGA480SSN-D. If you have a manual you're willing to share, please click here to send us an email with the attached manual. Thank You!

 


Replacement grill parts for the Dyna-Glo model: DGA480SSN-D
On this page you'll find all of the parts that fit model Dyna-Glo DGA480SSN-D. If the part you're shopping for isn't included below, you might find it using the category buttons on the right side of the page. For example, if your looking for a warming rack and there are none here, click the warming rack button to see all of the racks we have for Dyna-Glo grills. You will need to know the dimensions of your existing grids to help you find the right part.

To get the correct Dyna-Glo DGA480SSN-D BBQ parts
  • You should measure your existing parts and compare them to what we show here. This is best done with them removed from the grill.
  • Verify your Dyna-Glo model number by checking the CSA appliance tag on your grill to make sure you have the correct model number. Do not rely solely on the owners manual as these are frequently mixed up at retail stores when the grills are assembled. You'd be surprised at how many folks have the wrong owners manual.
 


DGA480SSN-D Burners

DYG-123-03003-X4 / DG1-123-03003-R-X4
Click for photos

123-03003-R-X4 Main Burner for Dyna-Glo model DGA480SSN-D. Set of four (4). Stainless steel. Fits Dyna-Glo DGA480 series grills including:

  • DGA480BSN
  • DGA480SSN
  • DGA550SSN
May fit other models.

This part replaces original Dyna-Glo burner # 123-03003.



Part Number: DG1-123-03003-R-X4 (Replaces Dyna-Glo DYG-123-03003-X4)
Dimensions: 16 3/8” x 1”
Material: stainless steel
Weight: 2.1

$113.36
 
Qty
 

DYG-123-03003 / DG1-123-03003-R
Click for photos

123-03003-R Main Burner for Dyna-Glo model DGA480SSN-D. Stainless steel. Fits Dyna-Glo DGA480 series grills including:

  • DGA480BSN
  • DGA480SSN
  • DGA550SSN
May fit other models.

This part replaces original Dyna-Glo burner # 123-03003.



Part Number: DG1-123-03003-R (Replaces Dyna-Glo DYG-123-03003)
Dimensions: 16 3/8” x 1”
Material: stainless steel
Weight: 0.5

$34.77
 
Qty
 

==> All Dyna-Glo Burners.
 





DGA480SSN-D Cooking Grids

DYG-113-03015 / DG1-113-03015-R
Click for photos

113-03015-R Cooking Grate set for Dyna-Glo model DGA480SSN-D. Porcelain enamel glossy finish cast iron grates. The 480 series grills originally came with two 13” grates, which are no longer available. This three (3) piece replacement set is the same total width as two of the originals.

Fits Dyna-Glo DGA480 series grills. May fit other models.

This grate set replaces two (2) of original Dyna-Glo part 113-03015.



Part Number: DG1-113-03015-R (Replaces Dyna-Glo DYG-113-03015)
Dimension Front-to-Back: 17 5/8”
Dimension Side-to-Side: 26 1/4”
Material: glossy cast iron
Weight: 10.5

$85.07
 
Qty
 

==> All Dyna-Glo Cooking Grids.
 





DGA480SSN-D Heat Plates

DYG-113-03005-X4 / DG1-113-03005-R-X4
Click for photos

113-03005-R-X4 Heat tent for Dyna-Glo model DGA480SSN-D. Porcelain enameled steel. Set of four..

Fits Dyna-Glo DGA480 series grills. May fit other models.

This heat tent replaces original Dyna-Glo part 113-03005.



Part Number: DG1-113-03005-R-X4 (Replaces Dyna-Glo DYG-113-03005-X4)
Dimension Front-to-Back: 15 9/16”
Dimension Side-to-Side: 5”
Material: porcelain steel
Weight: 1.0

$85.60
 
Qty
 

DYG-113-03005 / DG1-113-03005-R
Click for photos

113-03005-R Heat tent for Dyna-Glo model DGA480SSN-D. Porcelain enameled steel. Sold individually.

Fits Dyna-Glo DGA480 series grills. May fit other models.

This heat tent replaces original Dyna-Glo part 113-03005.



Part Number: DG1-113-03005-R (Replaces Dyna-Glo DYG-113-03005)
Dimension Front-to-Back: 15 9/16”
Dimension Side-to-Side: 5”
Material: porcelain steel
Weight: 1.0

$24.59
 
Qty
 

==> All Dyna-Glo Heat Plates.
 





DGA480SSN-D Igniter Components

DYG-113-03023 / 03380
Click for photos
Universal battery powered push button ignitor.
  • 1.5 volt
  • Has five (5) terminals (male spade connector)
  • Uses a single AA battery (not included))
  • 03610 and 03620 wires are commonly used with this igniter (not included)
  • Requires 7/8” mounting hole
  • Overall dimensions: 2” x 3 3/8” x 3”
  • Some original igniters had an integrated ground wire. Use wire part# 03620 for this purpose.

For more information about ignition systems and components, please see article Ignition 101 in our help center.



Part Number: 03380 (Replaces Dyna-Glo DYG-113-03023)
Dimensions: 3 5/16” x 2”
Weight: 0.7

$39.86
 
Qty
 

DYG-113-03020-X4 / DG1-113-03020-R-X4
Click for photos

113-03020-R-X4 Ignition electrode and ignition wire assembly. Set of four (4). Includes electrode 43” wire. Also includes a short gender changer wire (not used in most applications). Fits Dyna-Glo DGA480 and DGA550 series grills. May fit other models.

This Ignition electrode replaces original Dyna-Glo Electrode 113-03020 and Wire 113-03017.

For more information about ignition systems and components, please see article Ignition 101 in our help center.



Part Number: DG1-113-03020-R-X4 (Replaces Dyna-Glo DYG-113-03020-X4)
Material: ceramic
Weight: 0.1

$45.08
 
Qty
 

DYG-113-03020 / DG1-113-03020-R
Click for photos

113-03020-R Ignition electrode and ignition wire assembly. Includes electrode 43” wire. Also includes a short gender changer wire (not used in most applications). Fits Dyna-Glo DGA480 and DGA550 series grills. May fit other models.

This Ignition electrode replaces original Dyna-Glo Electrode 113-03020 and Wire 113-03017.

For more information about ignition systems and components, please see article Ignition 101 in our help center.



Part Number: DG1-113-03020-R (Replaces Dyna-Glo DYG-113-03020)
Material: ceramic
Weight: 0.1

$12.47
 
Qty
 

==> All Dyna-Glo Igniter Components.
 





DGA480SSN-D Accessories

BP-7
Wundersmoke Maple Chips. These unique maple wood smoking chips add distinctive maple wood flavoring to your food. For use will all grills. One 1lb bag. Comes with reusable puck.

Part Number: BP-7
Weight: 1.0

$9.75
 
Qty
 

41333
Click for photos
Stainless steel chicken roaster. Commonly called Beer Can roasters.
  • The best way to roast poultry on the grill
  • For use in barbecues and ovens
  • Dishwasher safe
  • Includes rack, rack support, and basting brush


Part Number: 41333
Material: stainless steel
Weight: 0.10

$19.84
 
Qty
 

WB-1
12” long wood handle brass bristle grid brush with scraper and leather hang strap.

Part Number: WB-1
Dimensions: 12
Weight: 0.4

$10.90
 
Qty
 

==> All DGA480SSN-D Accessories.
 



BBQ Part Categories
















 
 

Dyna-Glo grill model DGA480SSN-D - Sunday, Jan 26 2025

Return to Dyna-Glo grill parts main page



More Dyna-Glo grill models we have parts for
DGB610SSP | DGB730SNB | DGB730SNB-D | DGB730SNB-DC | DGC310CNP | DGC310CNP-D | DGD381BNC-D | DGE486BNP | DGE486BNP-D | DGE486BSP | DGE486BSP-D | DGE486DNP | DGE486GSP | DGE486GSP-D | DGE486SSP-D | DGE530BSP-D | DGE530GSP | DGE530GSP-D | DGE530GSP-DC | DGE530SSP | DGE530SSP-D | DGF350CSP | DGF350CSP-D | DGF486CSP | DGF486CSP-D | DGF486GRP | DGF486GRP-D | DGF486GSP | DGF487GRP | DGF493BNP | DGF493PNP-D | DGF510PBP | DGF510PBP-D | DGF510SBP | DGF510SSP | DGF510SSP-D | DGF530SRP | DGF600SSP | DGH483CRP | DGH483CRP-D | DGH485CRP | DGH485CRP-D | DGJ810CSB-D | DGN405DNC | DGN405DNC-D | DGN405SNC | DGN405SNC-D | DGN486DNC | DGN486DNC-D | DGN486SNC | Complete list of Dyna-Glo grill models...



*Orders for Dyna-Glo grill model DGA480SSN-D $49 and over ship free to the lower 48 states.
See shipping policy below for more info.


Home | About Us | Contact Us | Privacy Policy | Shipping Policy | Return Policy
January 26, 2025