Fiesta ESD40050 Grill Parts

Highest quality replacement parts for your Fiesta ESD40050 - Free USA shipping $49 or more* - No Sales Tax*

Fiesta ESD40050 owners manual and diagrams

Diagrams & owners manual not available for grill model# ESD40050. If you have a manual you're willing to share, please click here to send us an email with the attached manual. Thank You!

Replacement grill parts for the Fiesta model: ESD40050

This page shows all of the parts we know fit model Fiesta ESD40050. If the part you're shopping for isn't included below, you might find it using the category buttons on the right side of the page. For example, if your looking for a burner and there are none here, click the burner button to see all the burners we have for Fiesta grills. You will need to know the dimensions of your existing grids to help you find the right part.

To get the correct Fiesta ESD40050 BBQ parts

You should measure your existing parts and compare them to what we show here. This is best done with them removed from the grill.
Verify your Fiesta model number by checking the CSA appliance tag on your grill to make sure you have the correct model number. Do not rely solely on the owners manual as these are frequently mixed up at retail stores when the grills are assembled. You'd be surprised at how many folks have the wrong owners manual.

ESD40050 Burners

Click for photos

Stainless steel burner and venturi assembly kit for Fiesta model ESD40050. Comes with all necessary gaskets and screws.

Part Number: 19202-79402
Dimensions: 22” x 7 7/8”
Material: stainless steel
Weight: 3.5

Click for photos

Stainless steel H burner for Fiesta model ESD40050. Burner consists of two pieces, which are held together by the venturi.

Part Number: 19202
Dimensions: 22” x 7 7/8”
Material: stainless steel
Weight: 2.4

==> All Fiesta Burners.

ESD40050 Venturis

Click for photos

L-shaped venturi pair. Includes all necessary gaskets and screws/nuts.

Part Number: 79402
Dimensions: 5 1/2” x 3 1/8”
Material: zinc plated steel
Weight: 0.9

Click for photos

Universal Spider Guards. Helps prevent dangerous flashback fires caused by spider webs in venturi tubes.Stainless steel spider guards slip over the air shutter on most venturi tubes to help keep the spiders out. For 3/4” venturi tubes.

Part Number: SG-B
Material: stainless steel
Weight: 0.1

==> All Fiesta Venturis.

ESD40050 Cooking Grids

Cooking grid not known for Fiesta model ESD40050. Our parts information for this grill model is incomplete, and we really don't know with certainty which cooking grid fits this model. It may be that we have the part but don't show it here due to data or other error.

If you know the original OEM part number, try searching for it in the search box at the top of this page.

You can also browse through all of the Fiesta cooking grids we carry. If we don't have the exact fit grid for your grill, we may have a suitable replacement part. Measure your existing part as well as the the grid support area of the grill so you'll know exactly what size grids will fit.

If you have this grill model and know the number and dimensions of your original cooking grids, please share this information with us. Click here to send an email to our GrillDr that includes this information. We greatly appreciate your help.

Part Number: CG-DUMMY
Weight: 1.0

==> All Fiesta Cooking Grids.

ESD40050 Heat Plates

Click for photos

Stainless steel version of SP56-9 Smart Bar for Fiesta model ESD40050.
NOTE: The original part was porcelain coated steel. Far superior to the original, this aftermarket part is made of corrosion-resistant stainless steel for longer life.

Part Number: SP56-9-SS
Dimension Front-to-Back: 10 1/2”
Dimension Side-to-Side: 23 3/4”
Material: stainless steel
Weight: 3.0

==> All Fiesta Heat Plates.

ESD40050 Igniter Components

Click for photos

Universal extention wire, male spade end & female round end.

For more information about ignition systems and components, please see article Ignition 101 in our help center.

Part Number: IG-46B
Dimensions: 2 1/2
Weight: 0.10

Click for photos

Universal collector box with electrode and wire. Fits most H burners, cast iron and stainless. Mounts to burner using venturi screws. Slotted construction allow universal adjustment of electrode position.

For more information about ignition systems and components, please see article Ignition 101 in our help center.

Part Number: IG-15B
Weight: 0.3

==> All Fiesta Igniter Components.

ESD40050 Accessories

Click for photos

Stainless steel smoker box with cover. For use with all grills. Insert moistened wood chips (not included) for your favorite smoke flavor, 8 3/4” x 3 1/2” x 1 1/2”.

Part Number: SSST
Material: stainless steel
Weight: 1.5

Click for photos

EZ Check Gas level indicator. Accurate from -22° to 104°F. Magnetic back. Works on all sizes of tanks.

Part Number: 00030
Weight: 0.1

12” long wood handle brass bristle grid brush with scraper and leather hang strap.

Part Number: WB-1
Dimensions: 12
Weight: 0.4

==> All ESD40050 Accessories.

BBQ Part Categories

Fiesta grill model ESD40050 - Sunday, Jan 26 2025

Return to Fiesta grills main page

More Fiesta grill models we have parts for
EZA34545-P306 \| EZA34545-P314 \| EZA34545-T321 \| EZA3454535-B334 \| EZA34545T \| EZD4450-B308 \| EZD4450-B411 \| EZD4450-B711 \| EZD4450-BC410 \| EZD4450-BC411 \| EZD4450-BV445 \| EZD4450-K410 \| EZD4450-K411 \| EZD4450-K710 \| EZD45055 \| EZD45055-BC301 \| EZD45055-BC305 \| EZD45055-BC307 \| EZD45055-BC407 \| EZD45055-T316 \| EZD5555-B413 \| EZD5555-B428 \| EZD5555-B438 \| EZH24025-B403 \| EZH24030-B303 \| EZH30030 \| EZH30030-B405 \| EZH30035-B302 \| EZH30035-B402 \| EZH30040-B301 \| EZH34535-B309 \| EZK5455-K410 \| EZL24025 \| EZL24025-B401 \| EZL24025-B406 \| EZP3345-K403 \| EZT3345-BV406 \| EZT3345-BV410 \| EZT34535 \| EZT34535-B301 \| EZT34535-B303 \| EZT34535-B401 \| EZT34535-B403 \| EZT34535-P406 \| EZT34535-P412 \| EZT34535-T404 \| EZT34535-T407 \| EZT34545 \| EZT34545-B304 \| EZT34545-B307 \| Complete list of Fiesta grill models...

More Fiesta grill models we have parts for