GE ZGG36L31C2SS Grill Parts

Stainless steel smoker burner for GE model ZGG36L31C2SS. Fits all DCS grill models originally outfitted with a smoker.

Part Number: 12181 (Replaces GE WB28X10007)
Dimensions: 18” x 1”
Material: stainless steel
Weight: 0.7

Burner air shutter for GE model ZGG36L31C2SS. Made in USA.

NOTE: Sometimes shipped with vinyl peel-off coating. Remove before use.

Part Number: CLA-MS0060 (Replaces GE WB02X10376)
Material: stainless steel
Weight: 0.05

WB28X10021-R-X3 Cast iron ”H” burners for GE model ZGG36L31C2SS. Set of three (3). Includes integrated center-fed cast iron venturi. Aftermarket replacement for original GE burner part# WB28X10021. Meets or exceeds all manufacturer specifications.

Part Number: WB28X10021-R-X3 (Replaces GE WB28X10021-X3)
Dimensions: 20 1/2” x 6 1/4”
Material: cast iron
Weight: 45.60

WB28X10021-R Cast iron ”H” burner with integrated center-fed cast iron venturi for GE model ZGG36L31C2SS. Aftermarket replacement for original GE burner part# WB28X10021. Meets or exceeds all manufacturer specifications.

Part Number: WB28X10021-R (Replaces GE WB28X10021)
Dimensions: 20 1/2” x 6 1/4”
Material: cast iron
Weight: 13.6

WB49X10013-R-X3 Porcelain steel Grill Racks for GE model ZGG36L31C2SS. SET OF THREE (3). Porcelain enameled, glossy finish. WB49X10013-R is an aftermark replacement part for original GE part WB49X10013.

• Large diameter 3/8” steel rods
• Dimensions: 20 1/2” x 10 3/8”

Part Number: WB49X10013-R-X3 (Replaces GE WB49X10013-X3)
Dimension Front-to-Back: 20 1/2”
Dimension Side-to-Side: 10 7/16”
Material: porcelain steel wire
Weight: 10.11

WB49X10013-R Porcelain steel Grill Rack for GE model ZGG36L31C2SS. Porcelain enameled, glossy finish. WB49X10013-R is an aftermark replacement part for original GE part WB49X10013.

• Large diameter 3/8” steel rods
• Dimensions: 20 1/2” x 10 3/8”
• Sold individually.

Part Number: WB49X10013-R (Replaces GE WB49X10013)
Dimension Front-to-Back: 20 1/2”
Dimension Side-to-Side: 10 7/16”
Material: porcelain steel wire
Weight: 10.11

Premium quality heavy duty stainless steel grill rack for GE model ZGG36L31C2SS. Far superior to the original GE WB49X10013 porcelain steel rack it replaces, this rack is over 10 pounds of solid 304 grade stainless steel and will probably outlast a dozen of the porcelain steel racks.

Our USA-made premium stainless grids are simply the best obtainable. Unlike the standard issue stainless grids generally found today, which are typically low grade stainless, our premium grids are made from solid high quality stainless steel rods. If you're looking for the best obtainable, you've found it.

• 304 commercial grade stainless steel
• Large diameter 3/8” solid stainless rods
• Dimensions: 20 1/2” x 10 3/8”
• Made in USA.
• Sold individually.

Part Number: WB49X10013-SS
Dimension Front-to-Back: 20 1/2”
Dimension Side-to-Side: 10 3/8”
Material: stainless steel
Weight: 10.2

WB02X10661-R-X3 Stainless steel Gourmet Radiant Trays. SET OF THREE (3). Uniquely shaped to effectively distribute the heat from the burners evenly across the grill area.

Flare ups are minimized because the Gourmet Radiant Trays quickly redirects grease down to the drip pan before it can begin to burn.

• WB02X10661-R is an aftermarket part designed to replace the original GE part# WB02X10661.
• WB02X10661-R is also an aftermarket part designed to replace the original Fisher&Paykel part# 214252P.
• Fits 27”, 36”, and 48” models.
• Made in USA

NOTE: Sometimes shipped with vinyl peel-off coating. Remove before use.


Part Number: WB02X10661-R-X3 (Replaces GE WB02X10661-X3)
Dimensions: 19 1/4” x 9 1/4”
Material: stainless steel
Weight: 2.2

WB02X10661-R Stainless steel Gourmet Radiant Tray. Uniquely shaped to effectively distribute the heat from the burners evenly across the grill area.

Flare ups are minimized because the Gourmet Radiant Trays quickly redirects grease down to the drip pan before it can begin to burn.

• WB02X10661-R is an aftermarket part designed to replace the original GE part# WB02X10661.
• WB02X10661-R is also an aftermarket part designed to replace the original Fisher&Paykel part# 214252P.
• Fits 27”, 36”, and 48” models.
• Made in USA
• Sold individually

NOTE: Sometimes shipped with vinyl peel-off coating. Remove before use.


Part Number: WB02X10661-R (Replaces GE WB02X10661)
Dimensions: 19 1/4” x 9 1/4”
Material: stainless steel
Weight: 2.2

WB32X10002-R Stainless steel Smoker Burner Tray (sometimes referred to as a Smoker Drawer). Fits many GE Monogram series gas grills.

The overall length of this part, including the handle, is 23 3/4”. The tray, without the handle, measures 2 1/2” X 21 1/2”.

Unassembled. Assembly very easy, just the tray, handle and 8 small nuts and bolts.

This aftermarket part designed to replace original GE part# WB32X10002.

Part Number: WB32X10002-R (Replaces GE WB32X10002)
Dimensions: 23 3/4” x 2 1/2”
Material: stainless steel
Weight: 1.05

DCS Electrode with wire.

For more information about ignition systems and components, please see article Ignition 101 in our help center.

Part Number: IG-37B (Replaces GE WB07X10084)
Weight: 0.2

Complete electrode assembly. Includes electrode, collector box and wire. Aftermarket replacement for original part# WB02X10659 .

For more information about ignition systems and components, please see article Ignition 101 in our help center.

Part Number: WB02X10659-R (Replaces GE WB02X10659)
Weight: 0.2

Complete electrode assembly. Includes electrode, collector box and wire. Aftermarket replacement for original part# WB02X10660 .

For more information about ignition systems and components, please see article Ignition 101 in our help center.

Part Number: WB02X10660-R (Replaces GE WB02X10660)
Weight: 0.2

Brass valve for DCS.

• For LP and natural gas grills (see below)
• Off position D-Value: 12 o'clock
• Stem diameter: 8mm
• Orifice not included

NOTE: There is a set screw in the stem that allows this valve to be used in both LP or natural gas grills. The valve is shipped with the screw set in LP position. Turn the screw counterclockwise about seven turns for natural gas use.

Part Number: 30171 (Replaces GE WB21X10013)
Dimensions: 3 7/16” x 1 5/16”
Material: brass
Weight: 0.3

Plastic spit rod handle with brass insert.

• Requires bushing BU-1 (5/16” square spit rods) or BU-2 (3/8” square spit rods)
• Will fit our spit rods: SR-5; SR-8; SR-43
• Requires a threaded end on the spit rod
• The mounting hole in the handle is 3/8-16 coarse thread female

Part Number: PH-1 (Replaces GE WB15X10005)
Weight: 0.2

20” Professional Extra Long Tong.
20” Stainless steel tong with red soft grip rubber inserts. Grip your food on the grill with ease. Manual lock saves on storage space.


Part Number: 40269
Material: stainless steel
Weight: 0.14

Basting brush with angled oak handle. 18” overall length.

Part Number: BB-5
Dimensions: 18
Weight: 0.8