Grand Hall SS64NG Grill Parts

Highest quality replacement parts for your Grand Hall SS64NG - Free USA shipping $49 or more* - No Sales Tax*

Grand Hall SS64NG owners manual and diagrams

Diagrams & owners manual not available for grill model# SS64NG. If you have a manual you're willing to share, please click here to send us an email with the attached manual. Thank You!

Replacement gas grill parts for Grand Hall model: SS64NG

All of the parts we have for Grand Hall SS64NG are shown on this page. If you can't find the part you need below, click on the appropriate category button on the right side of the page. For example, if your looking for a heat indicator and there are none here, click the heat indicator button to see all we have for Grand Hall grills. Knowing the dimensions of your existing part will help you find the right part.

To get the correct Grand Hall SS64NG BBQ parts

You should measure your existing parts and compare them to what we show here. This is best done with them removed from the grill.
Verify your Grand Hall model number by checking the CSA appliance tag on your grill to make sure you have the correct model number. Do not rely solely on the owners manual as these are frequently mixed up at retail stores when the grills are assembled. You'd be surprised at how many folks have the wrong owners manual.

SS64NG Burners

P02008024A / SCTB5

Click for photos

Sam's Club burner W/ Lip like OEM for Grand Hall model SS64NG.

Part Number: SCTB5 (Replaces Grand Hall P02008024A)
Dimensions: 14 3/4
Material: stainless steel
Weight: 0.7

==> All Grand Hall Burners.

SS64NG Burner Brackets and Carryovers

P0220505ED / CLA-MS0108

Click for photos

Stainless steel burner mounting bracket with integrated gas carryover tubes. Made in USA

Part Number: CLA-MS0108 (Replaces Grand Hall P0220505ED)
Dimensions: 31 7/8
Material: stainless steel
Weight: 1.5

==> All Grand Hall Burner Brackets and Carryovers.

SS64NG Cooking Grids

P01615015A / CG-63P-CI-X2

Click for photos

Cast iron cooking grids for Grand Hall model SS64NG. SET OF TWO (2) panels.

Porcelain treated, matte finish
Each panel measures 16 15/16” x11 3/4”
Overall dimensions: 16 15/16” x23 1/2”

Part Number: CG-63P-CI-X2 (Replaces Grand Hall P01615015A)
Dimension Front-to-Back: 16 15/16”
Dimension Side-to-Side: 11 3/4”
Material: cast iron
Weight: 14.30

CG-63P-CI

Click for photos

Cast iron cooking grid for Grand Hall model SS64NG. Porcelain treated, matte finish. Sold individually, number required varies by grill model.

Part Number: CG-63P-CI
Dimension Front-to-Back: 16 15/16”
Dimension Side-to-Side: 11 3/4”
Material: cast iron
Weight: 7.15

CG-85SSET

Click for photos

Set of two channel formed U-shaped cooking grids, commercial grade 304 stainless steel for Weber Genesis Silver B & C, Genesis Gold B & C, Genesis 1000 - 3500 and Spirit 700 for Grand Hall model SS64NG. Channel formed means rolled steel stamped into a U-shape; is not solid round rods.

Part Number: CG-85SSET
Dimension Front-to-Back: 17 5/16”
Dimension Side-to-Side: 23 1/2”
Material: stamped stainless steel
Weight: 5.45

Cast iron cooking grids for Grand Hall model SS64NG. SET OF TWO (2). Porcelain treated, matte finish. Sold individually, number required varies by grill model.

Part Number: CG-57P-CI-X2
Dimension Front-to-Back: 17 5/16”
Dimension Side-to-Side: 11 11/16”
Material: cast iron
Weight: 14.7

==> All Grand Hall Cooking Grids.

SS64NG Heat Plates

P01708004A / SCHP1

Click for photos

Stainless steel heat plate for Grand Hall model SS64NG.

Part Number: SCHP1 (Replaces Grand Hall P01708004A)
Dimension Front-to-Back: 14 5/8”
Dimension Side-to-Side: 3 7/8”
Material: stainless steel
Weight: 1.0

==> All Grand Hall Heat Plates.

SS64NG Igniter Components

P02609009M / IG-17B

Click for photos

Stainless steel collector box and ceramic electrode with round connector. Includes mounting nuts and washer.

For more information about ignition systems and components, please see article Ignition 101 in our help center.

Part Number: IG-17B (Replaces Grand Hall P02609009M)
Weight: 0.11

P02502024C / IGEIB4-B

Click for photos

Battery powered push button igniter.

Has four (4) spade type male connectors.
Uses 1 AAA battery (not supplied)
Requires 3/4” or 13/16” mounting hole.

For more information about ignition systems and components, please see article Ignition 101 in our help center.

Part Number: IGEIB4-B (Replaces Grand Hall P02502024C)
Weight: 0.3

TS-IG4010

Click for photos

Push-button electronic igniter with four (4) spade connectors. Black cap. Uses one AAA battery (not included). Requires a 3/4” mounting hole.

For more information about ignition systems and components, please see article Ignition 101 in our help center.

Part Number: TS-IG4010
Weight: 0.2

IG-30B

Click for photos

46” Wire with female spade connectors and square plastic connectors.

For more information about ignition systems and components, please see article Ignition 101 in our help center.

Part Number: IG-30B
Dimensions: 46
Weight: 0.1

10342-T14

Click for photos

21” wire for side burner or other applications. One female spade connector, one female round connector.

For more information about ignition systems and components, please see article Ignition 101 in our help center.

Part Number: 10342-T14
Dimensions: 21
Weight: 0.05

IG-7B

Click for photos

20” igniter wire with female spade and round connector.

For more information about ignition systems and components, please see article Ignition 101 in our help center.

Part Number: IG-7B
Weight: 0.02

IG-48B

Click for photos

16” Universal Ignitor Wire

For more information about ignition systems and components, please see article Ignition 101 in our help center.

Part Number: IG-48B
Dimensions: 16
Weight: 0.05

IG-20B

Click for photos

Burner-mounted ceramic igniter electrode with mounting bracket and hardware.

For more information about ignition systems and components, please see article Ignition 101 in our help center.

Part Number: IG-20B
Weight: 0.05

==> All Grand Hall Igniter Components.

SS64NG Regulators and Hoses

P03601003A / HR-4B

Click for photos

Type 1 LP Regulator with 22” Pressure Hose and 3/8” Female Flare Fitting.FITS: Up to 60,000 BTUs

Part Number: HR-4B (Replaces Grand Hall P03601003A)
Dimensions: 22
Weight: 0.8

==> All Grand Hall Regulators and Hoses.

SS64NG Accessories

40269

Click for photos

20” Professional Extra Long Tong.
20” Stainless steel tong with red soft grip rubber inserts. Grip your food on the grill with ease. Manual lock saves on storage space.

Part Number: 40269
Material: stainless steel
Weight: 0.14

BRGG

Click for photos

Universal Grid Lifting Tool

Part Number: BRGG
Weight: 1.0

==> All SS64NG Accessories.

BBQ Part Categories

Grand Hall model SS64NG - Sunday, Jan 26 2025

Return to Grand Hall grill parts main page

More Grand Hall grill models we have parts for

B3808ANG | B3810ALP | B3810ANG | B3810BLP | B3810BNG | B3812ALP | B3812ANG | B3812BLP | B3812BNG | B3816ALP | B3816ANG | B3816BLP | B3816BNG | B4019LP | B4019NG | BAI07ALP | BAI07ANG | BAI08ALP | BAI08ANG | BAI10ALP | BAI10ANG | BAI10BLP | BAI10BNG | BAI12ALP | BAI12ANG | BAI12BLP | BAI12BNG | BAI16ALP | BAI16ANG | BAI16BLP | BIG-8116 | BM42 | BM584 | BM584LP | BM584NG | BM64 | BM64-B | BM64-B-NG | BM72 | BM72-B | BM72-B-NG | BM72LP | BM73 | BM84LP | BM84NG | BM85096 | BM96 | BM96NG | BTE2614ALP | BTE2614ANG | Complete list of Grand Hall grill models...

*Orders for Grand Hall grill model SS64NG $49 and over ship free to the lower 48 states.
See shipping policy below for more info.

Home | About Us | Contact Us | Privacy Policy | Shipping Policy | Return Policy
January 26, 2025