Home Depot 730-0230 Grill Parts

Stainless steel burner for Home Depot model 730-0230.


Part Number: CTB1
Dimensions: 16 7/8
Material: stainless steel
Weight: 1.0

Cooking grid not known for Home Depot model 730-0230. Our parts information for this grill model is incomplete, and we really don't know with certainty which cooking grid fits this model. It may be that we have the part but don't show it here due to data or other error.

If you know the original OEM part number, try searching for it in the search box at the top of this page.

You can also browse through all of the Home Depot cooking grids we carry. If we don't have the exact fit grid for your grill, we may have a suitable replacement part. Measure your existing part as well as the the grid support area of the grill so you'll know exactly what size grids will fit.

If you have this grill model and know the number and dimensions of your original cooking grids, please share this information with us. Click here to send an email to our GrillDr that includes this information. We greatly appreciate your help.

Part Number: CG-DUMMY
Weight: 1.0

SET OF THREE/3 PACK Stainless steel Flame Tamers for Home Depot model 730-0230. Sold individually, number required varies. Made in USA.

NOTE: Sometimes shipped with vinyl peel-off coating. Remove before use.

Part Number: CLA-TS0019-X3
Dimension Front-to-Back: 17 1/4”
Dimension Side-to-Side: 6 15/16”
Material: stainless steel
Weight: 3.6

Stainless steel Flame Tamer for Home Depot model 730-0230. Sold individually, number required varies. Made in USA.

NOTE: Sometimes shipped with vinyl peel-off coating. Remove before use.

Part Number: CLA-TS0019
Dimension Front-to-Back: 17 1/4”
Dimension Side-to-Side: 6 15/16”
Material: stainless steel
Weight: 1.2

Stainless steel Flame Tamer for Home Depot model 730-0230.


Part Number: NGCHP1
Dimension Front-to-Back: 17 1/4”
Dimension Side-to-Side: 6 15/16”
Material: stainless steel
Weight: 0.7

Control knob
* Fits many Home Depot/Charmglow models
* Unique two tone design
* May require a 5/64” Allen wrench to remove the old knob and to install the new knob.

• Off position D-Value: 12:00 o'clock
• Knob diameter: 2 5/16”
• Socket diameter: 5 /16”
• Knob shaft: none (flat)

Part Number: K-14B
Dimensions: 2 1/4
Weight: 0.1

Flame thrower valve for natural gas. 15,000 BTU.

• Orifice included
• 30° angle
• Includes clamp and screws

Part Number: CLA-VN0232
Dimensions: 4 1/8
Material: aluminum/brass
Weight: 0.50

Rotisserie kit for Charmglow stainless 3-Burner models. THIS KIT INCLUDES A CUSTOM ”STANDOFF” MOTOR BRACKET. Includes:

• Heavy-Duty R06 rotisserie motor with stainless steel case
• SR-5 31” X 5/16” spit rod
• BU-1 spit rod bushing
• PH-1 spit rod handle
• MH-1B Chrome-plated meat forks
• MB-4B Custom standoff rotisserie motor bracket and screws
• MB-2B Rotisserie bushing bracket (for grills with no bushing notch in casting)
• Maximum 25 lbs. balanced load

Fits grills with hoods up to 26 inches wide. Be sure to measure before ordering.

NOTE: This kit does NOT include spit rod counter balance, which should on all spit rods be used to insure even weight distribution.

NOTE: Some of the parts in the kit are designed for a 5/16” rod. Rod SR-43, which is a 3/8” square rod and requires a 9/16” rod hole, will not work with some of the parts in this kit.

Part Number: RKCHAR1
Weight: 4.6

Oval lid heat indicator. Three-hole mount with two threaded studs 1 1/2” offset on center. Requires 3/8” center hole for temperature sensor probe.

Part Number: 22551
Dimensions: 2 15/16” x 1 7/8”
Weight: 0.2

15” Stainless steel tong.

• Soft comfort grip
• Locking mechanism

Part Number: 40259
Dimensions: 15
Material: stainless steel
Weight: 0.14

EZ Check Gas level indicator. Accurate from -22° to 104°F. Magnetic back. Works on all sizes of tanks.

Part Number: 00030
Weight: 0.1