Huntington 6666-54 Grill Parts

Highest quality replacement parts for your Huntington 6666-54 - Free USA shipping $49 or more* - No Sales Tax*

Huntington 6666-54 owners manual and diagrams

Diagrams & owners manual not available for grill model# 6666-54. If you have a manual you're willing to share, please click here to send us an email with the attached manual. Thank You!

Replacement gas grill parts for Huntington model: 6666-54

All of the parts we have for Huntington 6666-54 are shown on this page. If the part you need is not shown below, try clicking the appropriate category button on the right side of the page. For example, if your looking for a Flame Tamer/Heat Plate and there are none here, click the Heat Plate button to see all of the Heat Plates we have for Huntington grills. You will need to know the dimensions of your existing grids to help you find the right part.

To get the correct Huntington 6666-54 BBQ parts

You should measure your existing parts and compare them to what we show here. This is best done with them removed from the grill.
Verify your Huntington model number by checking the CSA appliance tag on your grill to make sure you have the correct model number. Do not rely solely on the owners manual as these are frequently mixed up at retail stores when the grills are assembled. You'd be surprised at how many folks have the wrong owners manual.

6666-54 Burners

52904-E400LP

Click for photos

Genuine OEM Huntington stainless steel main tube burner for Huntington model 6666-54. For LP gas, the air shutter should be open about 1/3.

Note: This part also the factory replacement for burner 52904-E400, which has been discontinued.

Part Number: 52904-E400LP
Dimensions: 14 1/2
Material: stainless steel
Weight: 1.0

==> All Huntington Burners.

6666-54 Burner Brackets and Carryovers

08002

Click for photos

Cross-over for 1” dia burners

Part Number: 08002
Dimensions: 20 5/8” x 1 1/2”
Material: stainless steel
Weight: 1.1

==> All Huntington Burner Brackets and Carryovers.

6666-54 Cooking Grids

10225-E404

Click for photos

Genuine OEM Huntington stainless steel cooking grid for Huntington model 6666-54. SOLD INDIVIDUALLY. Number required varies, check your grill to be sure.

Part Number: 10225-E404
Dimension Front-to-Back: 15”
Dimension Side-to-Side: 12 3/4”
Material: Stainless steel
Weight: 5.10

38170121

Click for photos

Genuine OEM Huntington cast iron cooking grid, single panel for Huntington model 6666-54.

Sold individually.
Number required varies.
Porcelain treated matte finish.

Part Number: 38170121
Dimension Front-to-Back: 15”
Dimension Side-to-Side: 12 3/4”
Material: Cast Iron
Weight: 5.55

CG-52SS

Click for photos

Stainless steel steel cooking grid for Huntington model 6666-54. Made in USA.

Part Number: CG-52SS
Dimension Front-to-Back: 15 1/16”
Dimension Side-to-Side: 25 1/4”
Material: stainless steel
Weight: 6.9

10225-T436

Click for photos

Genuine OEM Huntington reversible heavy cast iron cooking grid SOLD INDIVIDUALLY for Huntington model 6666-54.

Sold individually
Number required varies, check your grill
Porcelain treated, flat matte finish
Pointed side is designed for perfect sear marks
Grooved side captures juices for continuous basting

Note: See part 10225-E404 for a stainless steel version of this grid.

Part Number: 10225-T436
Dimension Front-to-Back: 15”
Dimension Side-to-Side: 12 3/4”
Material: Cast iron
Weight: 7.6

==> All Huntington Cooking Grids.

6666-54 Heat Plates

10222-E400

Click for photos

Genuine OEM Huntington stainless steel Flav-R-Wave for Huntington model 6666-54.

Part Number: 10222-E400
Dimension Front-to-Back: 13 3/4”
Dimension Side-to-Side: 6 1/4”
Material: Stainless steel
Weight: 1.25

==> All Huntington Heat Plates.

6666-54 Igniter Components

TS-IG3007

Click for photos

Push-button electronic igniter with three (3) spade connectors. Comes with sliver or black cap per availability. Needs (1) AA battery (not included); requires 7/8” mounting hole.

For more information about ignition systems and components, please see article Ignition 101 in our help center.

Part Number: TS-IG3007
Weight: 0.2

TS-IG3008

Click for photos

Push-button electronic igniter with three (3) spade connectors. Black cap. 1 AAA battery (not included).

For more information about ignition systems and components, please see article Ignition 101 in our help center.

Part Number: TS-IG3008
Weight: 0.2

IG-30B

Click for photos

46” Wire with female spade connectors and square plastic connectors.

For more information about ignition systems and components, please see article Ignition 101 in our help center.

Part Number: IG-30B
Dimensions: 46
Weight: 0.1

IGEIB3-B

Click for photos

Battery powered push button igniter.

Has three (3) spade type male connectors.
Uses 1 AAA battery (not supplied)
Requires 3/4” or 13/16” mounting hole.

For more information about ignition systems and components, please see article Ignition 101 in our help center.

Part Number: IGEIB3-B
Weight: 0.3

IG-48B

Click for photos

16” Universal Ignitor Wire

For more information about ignition systems and components, please see article Ignition 101 in our help center.

Part Number: IG-48B
Dimensions: 16
Weight: 0.05

10342-E12

Click for photos

Genuine OEM Huntington electrode with 11” connector wire that has a flat/spade female end; use with AA or AAA battery powered ignitors.

For more information about ignition systems and components, please see article Ignition 101 in our help center.

This part is currently out of stock, but more are already on the way and expected to arrive early Aug

Part Number: 10342-E12
Weight: 0.05

==> All Huntington Igniter Components.

6666-54 Heat indicators and Meat Thermometers

10571-5

Click for photos

Genuine OEM Huntington Heat indicator. About 1 7/8” wide and 1 7/16” high. The threaded stem is about 5/16” diameter and 1 1/8” long.

Part Number: 10571-5
Dimensions: 1 7/8” x 1 7/16”
Weight: 0.1

==> All Huntington Heat indicators and Meat Thermometers.

6666-54 Accessories

00150

Click for photos

Cast iron smoker box with six oblong venting holes. Designed to release wood smoke. Make sure this part will fit into your grill before ordering 8 3/8” x 5 1/4” x 1 3/8”.

Part Number: 00150
Dimensions: 5 1/4” x 8 3/8”
Material: cast iron
Weight: 3.90

FS-1

Click for photos

Fish Spatula. Stainless steel fish spatula with genuine rosewood handle. 18 1/2”. 10” spatula width.

Part Number: FS-1
Dimensions: 18 1/2
Material: stainless steel
Weight: 1.0

BRGG

Click for photos

Universal Grid Lifting Tool

Part Number: BRGG
Weight: 1.0

RR-2

Click for photos

Chrome plated rib/potatoe rack. Spaces up to 6 racks of ribs and 6 potatoes. Fits all grills. 12” x 7 1/4”.

Part Number: RR-2
Material: chrome steel
Weight: 1.0

WB-3

18” long wood handle brass bristle grid brush with scraper and leather hang strap.

Part Number: WB-3
Dimensions: 18
Weight: 0.59

==> All 6666-54 Accessories.

BBQ Part Categories

Huntington model 6666-54 - Thursday, Sep 5 2024

Return to Huntington grills main page

More Huntington grill models we have parts for

6761-87 | 6765-24 | 6765-27 | 6765-84 | 6765-87 | 6771-84 | 6771-87 | 6781-84 | 6781-87 | 6785-44 | 6785-47 | 6785-64 | 6785-67 | 6811-53 | 6811-54 | 6811-57 | 6811-63 | 6811-64 | 6811-67 | 6812-54 | 6812-54B | 6812-57 | 6812-57B | 6812-64 | 6812-64B | 6812-67 | 6812-67B | 681254 | 681254B | 681257 | 681257B | 681264 | 681264B | 681267 | 681267B | 6821-54 | 6821-57 | 6821-63 | 6821-64 | 6821-67 | 6821-84 | 6821-87 | 6822-53 | 6822-54 | 6822-54B | 6822-57 | 6822-57B | 6822-63 | 6822-64 | 6822-64B | Complete list of Huntington grill models...

*Orders for Huntington grill model 6666-54 $49 and over ship free to the lower 48 states.
See shipping policy below for more info.

Home | Contact Us | Privacy Policy | Return Policy | Shipping Policy | About Us
Date: Thursday, September 5, 2024