Master Forge SH3118B Grill Parts

Master Forge 4-Burner Green LP Gas Grill, Lowes item# 314076

Highest quality replacement parts for your Master Forge SH3118B - Free USA shipping $49 or more* - No Sales Tax*

Master Forge SH3118B owners manual and diagrams

Diagrams & owners manual not available for grill model# SH3118B. If you have a manual you're willing to share, please click here to send us an email with the attached manual. Thank You!

Replacement grill parts for the Master Forge model: SH3118B

All of the parts we have for Master Forge SH3118B are shown on this page. If the part you're shopping for isn't included below, you might find it using the category buttons on the right side of the page. For example, if your looking for a Flame Tamer/Heat Plate and there are none here, click the Heat Plate button to see all of the Heat Plates we have for Master Forge grills. You will need to know the dimensions of your existing grids to help you find the right part.

To get the correct Master Forge SH3118B BBQ parts

You should measure your existing parts and compare them to what we show here. This is best done with them removed from the grill.
Verify your Master Forge model number by checking the CSA appliance tag on your grill to make sure you have the correct model number. Do not rely solely on the owners manual as these are frequently mixed up at retail stores when the grills are assembled. You'd be surprised at how many folks have the wrong owners manual.

SH3118B Burners

Click for photos

Adjustable universal front-to-back tube burner with top-ported flame holes for Master Forge model SH3118B. This burner may not work with existing ignition electrodes and back burner cross-overs.

Variable length burner adjusts from 13 1/2” to 17 1/2”.
Includes extra hardware and mounting brackets to accommodate almost all grills.
Comes with complete installation instructions and diagrams.

WARNING: Before ordering this universal burner, please verify that it will work in your grill per the specifications above. If you order this universal burner and it does not work in your grill, please review our Return Policy for ”Ordered Wrong Part.” You will be responsible for all shipping fees.

Part Number: FP-BR1001
Material: stainless steel
Weight: 0.7

Click for photos

Premium grade 304 stainless steel tube burner for Master Forge model SH3118B. Sold individually, number required varies by grill.

Part Number: CLA-BS0256
Dimensions: 16 3/4” x 1”
Material: stainless steel
Weight: 0.45

Click for photos

Premium grade 304 stainless steel tube burner for Master Forge model SH3118B.

Part Number: KENMFT1
Dimensions: 16 3/4” x 1”
Material: stainless steel
Weight: 1.0

==> All Master Forge Burners.

SH3118B Cooking Grids

Click for photos

Cast iron cooking grids (set of 2) for Master Forge model SH3118B. Porcelain treated, matte finish.

Part Number: 67222
Dimension Front-to-Back: 17 5/8”
Dimension Side-to-Side: 19 1/8”
Material: cast iron
Weight: 7.10

Click for photos

Cast iron cooking grid for Master Forge model SH3118B. Porcelain treated, matte finish. Fits Many Brinkman, Grill King, Kenmore, Master Forge and Other Import Grills. Sold individually, number required varies.

Part Number: CG-73P-CI
Dimension Front-to-Back: 17 5/8”
Dimension Side-to-Side: 8 3/4”
Material: cast iron
Weight: 5.55

==> All Master Forge Cooking Grids.

SH3118B Heat Plates

Click for photos

Stainless steel heat plate/ Flame Tamer for Master Forge model SH3118B.

Part Number: KENMFHP1
Dimension Front-to-Back: 15 5/8”
Dimension Side-to-Side: 4 1/8”
Material: stainless steel
Weight: 0.85

==> All Master Forge Heat Plates.

SH3118B Igniter Components

Click for photos

Electrode assembly. Includes:

Ceramic electrode
Gas collector box
40” connector wire with female spade connector
Mounting nuts and bolts

For more information about ignition systems and components, please see article Ignition 101 in our help center.

Part Number: 03118
Material: ceramic
Weight: 0.2

Click for photos

Universal battery powered push button ignitor.

1.5 volt
Has five (5) terminals (male spade connector)
Uses a single AA battery (not included))
03610 and 03620 wires are commonly used with this igniter (not included)
Requires 7/8” mounting hole
Overall dimensions: 2” x 3 3/8” x 3”
Some original igniters had an integrated ground wire. Use wire part# 03620 for this purpose.

For more information about ignition systems and components, please see article Ignition 101 in our help center.

Part Number: 03380
Dimensions: 3 5/16” x 2”
Weight: 0.7

==> All Master Forge Igniter Components.

SH3118B Grease Trays

Click for photos

Stainless steel grease tray. This is an unassembled two-piece tray. Unlike the original, it can be installed without disassembling the grill. Includes

Two tray pieces: A left side, B right side
Two grease cups
Two grease cup holders
All necessary nuts, bolts, and washers
Assembly/installation instructions

Made in USA.

Part Number: CLA-DS0220
Dimensions: 14 3/4” x 31”
Material: stainless steel
Weight: 6.15

==> All Master Forge Grease Trays.

SH3118B Warming Racks

Click for photos

Alternative warming rack, no wire rods. Made in USA. For main cooking area, larger warming rack.

Stainless steel
Made in USA

Part Number: CLA-WS0222A
Dimensions: 6 15/16” x 19 15/16”
Material: stainless steel
Weight: 1.35

Click for photos

Alternative warming rack, not rods, for infrared burner area, smaller warming rack. Made in USA. With lip up and rear installed.

Stainless steel
Made in USA

Part Number: CLA-WS0222B
Dimensions: 6 15/16” x 9 3/8”
Material: stainless steel
Weight: 0.65

==> All Master Forge Warming Racks.

SH3118B Miscellaneous Repair Parts

Click for photos

Front clip-on shelf made specifically for Master Forge model SH3118B as an extra front workspace. Includes three pieces with nuts and bolts for assembly. Instructions included.

Part Number: CLA-AS0221
Dimensions: 11” x 19 1/2”
Material: stainless steel
Weight: 2.85

==> All Master Forge Miscellaneous Repair Parts.

SH3118B Accessories

Click for photos

Stainless steel smoker box with cover. For use with all grills. Insert moistened wood chips (not included) for your favorite smoke flavor, 8 3/4” x 3 1/2” x 1 1/2”.

Part Number: SSST
Material: stainless steel
Weight: 1.5

Stainless steel straight handle grill brush with replaceable head. Brass bristles and scarper. See part# WB-8RH for replacement grill brush heads. 18 1/2” long.

Part Number: WB-8
Dimensions: 18 1/2
Material: stainless steel
Weight: 0.8

==> All SH3118B Accessories.

BBQ Part Categories

Master Forge grill model SH3118B - Sunday, Jan 26 2025

Return to Master Forge grill parts main page

More Master Forge grill models we have parts for
6318B \| 678489 \| B10LG25 \| BG1793B-A \| BG1795BAL \| BG179A \| BG2294B-B \| BG2294B-LB \| BG2294B-LS \| BG2296B-L \| BG2614B \| BG2614B-L \| DG0576CC \| DGY784CP \| E3518-LP \| GCP-2601 \| GD4215S \| GD4825 \| GD4825S \| GD4833 \| GGP-2501 \| GGP-2601 \| GGPL-2100CA \| GR1008-015039 \| GR2045401-MF-00 \| GR2045402-MF-00 \| GR4039-014247 \| IGS-01015J \| L3218 \| MFA350BNP \| MFA350CNP \| MFA480BSP \| MFA480GSN \| MFA480GSP \| MFA550CBP \| MFJ576CNC \| MFJ576DNC \| MFJ576DNC-D \| MFJ576PNC \| MFJ810CSB \| P3018 \| RT2417S \| TG2036701-MF \| 1010037 \| 1010048 \| 24025MSF \| 2518-3 \| 2518LN-LPG \| 288994 \| Complete list of Master Forge grill models...

More Master Forge grill models we have parts for

6318B | 678489 | B10LG25 | BG1793B-A | BG1795BAL | BG179A | BG2294B-B | BG2294B-LB | BG2294B-LS | BG2296B-L | BG2614B | BG2614B-L | DG0576CC | DGY784CP | E3518-LP | GCP-2601 | GD4215S | GD4825 | GD4825S | GD4833 | GGP-2501 | GGP-2601 | GGPL-2100CA | GR1008-015039 | GR2045401-MF-00 | GR2045402-MF-00 | GR4039-014247 | IGS-01015J | L3218 | MFA350BNP | MFA350CNP | MFA480BSP | MFA480GSN | MFA480GSP | MFA550CBP | MFJ576CNC | MFJ576DNC | MFJ576DNC-D | MFJ576PNC | MFJ810CSB | P3018 | RT2417S | TG2036701-MF | 1010037 | 1010048 | 24025MSF | 2518-3 | 2518LN-LPG | 288994 | Complete list of Master Forge grill models...