MHP THRG Grill Parts

Cast stainless steel oval burner for MHP model THRG. Fits W3G, T3G, WHRG, THRG, GHJK.

Part Number: GG-HCSSB
Weight: 0.8

Rectangular Infra-Red Burner for WRG/TRG for MHP model THRG. The 14 inch dimension is from the tip of the support bracket to the end of the venturi. The burner itself is 12 1/4” by 6 1/2”. (For infrared burner clip, refer to your model number. There are two for different models: GG-IBC and KK-IBC.)

Part Number: GG-IRB
Dimensions: 14” x 6 1/2”
Weight: 3.05

SearMagic Cooking Grid for models THRG, TRG, TJK, WNK, WHRG, WRG, W3G, and T3G for MHP model THRG.

• High Performance, Rust-Free Anodized Aluminum Cooking Grids.
• Sold individually, number required varies

This unique cooking grid heats up faster and cooks all foods at a uniform temperature. Use the wide-ribbed side for grilling steaks, chops, burgers and ribs, branding them with the sear lines. Use the flip side, with its smooth surface for grilling delicate foods such as fish, seafood and vegetables.

Part Number: GG-GRID-S
Dimension Front-to-Back: 15 3/4”
Dimension Side-to-Side: 8”
Material: Anodized Aluminum
Weight: 2.2

Briquette grate for WHRG and THRG; has a one inch elevation by four corner support pegs/feet.

Part Number: GG-GRATE-HSS
Dimension Front-to-Back: 13 11/16”
Dimension Side-to-Side: 15 3/16”
Material: stainless steel
Weight: 3.00

Heat Plate/ Flame Tamer not known for MHP model THRG. Our parts information for this grill model is incomplete, and we really don't know with certainty which heat plate fits this model. It may be that we have the part but don't show it here due to data or other error.

If you know the original OEM part number, try searching for it in the search box at the top of this page.

You can also browse through all of the heat plates we carry for your brand grill. If we don't have the exact fit for your grill, we may have a suitable replacement part. Measure your existing part so you'll know exactly what size is needed.

If you have this grill model and know the number and dimensions of your original heat plates, click here to send an email to our GrillDr that includes this information. We greatly appreciate your help.

Part Number: HP-DUMMY
Weight: 1.0

3 Prong Electronic Ignitor for Infrared Grills

For more information about ignition systems and components, please see article Ignition 101 in our help center.

Part Number: GG-EIB3
Weight: 0.2

Hybrid burner collector box.

For more information about ignition systems and components, please see article Ignition 101 in our help center.

Part Number: GG-HIB
Weight: 0.2

Infrared/Hybrid Ignitor Probe

For more information about ignition systems and components, please see article Ignition 101 in our help center.

Part Number: GG-IIP
Weight: 0.02

Infrared Hybrid Probe Shield

For more information about ignition systems and components, please see article Ignition 101 in our help center.

Part Number: GG-IPS
Weight: 0.03

Rectangular heat indicator for old style MHP grills that has two pegs and a center probe to mount through the casting. It was used on older JNR and WNK grills. We are not sure when MHP changed to the newer heat indicator GG-TG4 that has one larger peg to mount. The GG-TG3 needs two small holes for mounting and one hole in the center for the probe.

Part Number: GG-TG3
Dimensions: 2 5/8” x 2 1/4”
Weight: 0.15

Round temperature gauge. Fits MHP Grills JNR, WNK, TJK, GJK, WRG, TRG.

• 2 1/2” diameter.
• Single prob
• Requires 3/8” mounting hole

Part Number: GG-TG4
Weight: 0.15

EZ Check Gas level indicator. Accurate from -22° to 104°F. Magnetic back. Works on all sizes of tanks.

Part Number: 00030
Weight: 0.1

12” long wood handle brass bristle grid brush with scraper and leather hang strap.

Part Number: WB-1
Dimensions: 12
Weight: 0.4