Grill-Parts home
 

Nexgrill 720-0697E Grill Parts

Nexgrill logo

 

 

Highest quality replacement parts for your Nexgrill 720-0697E - Free USA shipping $49 or more* - No Sales Tax*

 

Nexgrill 720-0697E owners manual and diagrams
Diagrams & owners manual not available for grill model# 720-0697E. If you have a manual you're willing to share, please click here to send us an email with the attached manual. Thank You!

 


Replacement gas grill parts for Nexgrill model: 720-0697E
On this page you'll find all of the parts that fit model Nexgrill 720-0697E. We might not show the part you need here but we may still have it, or a functional equivalent. In this case, try the category buttons on the right. For example, if your looking for a cooking grid and there are none here, click the cooking grids button to see all of the cooking grids we have for Nexgrill grills. Knowing the dimensions of your existing part will help you find the right part.

To get the correct Nexgrill 720-0697E BBQ parts
  • You should measure your existing parts and compare them to what we show here. This is best done with them removed from the grill.
  • Verify your Nexgrill model number by checking the CSA appliance tag on your grill to make sure you have the correct model number. Do not rely solely on the owners manual as these are frequently mixed up at retail stores when the grills are assembled. You'd be surprised at how many folks have the wrong owners manual.
 


720-0697E Burners

CBP10
Click for photos
Stainless Steel tube burner for Nexgrill model 720-0697E.

Part Number: CBP10
Dimensions: 14 7/8” x 1”
Material: stainless steel
Weight: .40

$37.00
 
Qty
 

==> All Nexgrill Burners.
 





720-0697E Cooking Grids

59812
Click for photos
Channel formed U-shaped porcelain steel cooking grids for Nexgrill model 720-0697E. Channel formed means rolled steel stamped into a U-shape; is not solid round rods. Porcelain enameled, glossy finish. Sold as a set of two (2).

Part Number: 59812
Dimension Front-to-Back: 17 3/16”
Dimension Side-to-Side: 27”
Material: stamped porcelain steel
Weight: 7.2

$66.19
 
Qty
 

61192
Click for photos
Cast iron cooking grids for Nexgrill model 720-0697E. Porcelain treated, flat matte finish. Sold as a set of two (2).

Part Number: 61192
Dimension Front-to-Back: 17”
Dimension Side-to-Side: 26 1/2”
Material: matte cast iron
Weight: 12.10

$92.43
 
Qty
 

==> All Nexgrill Cooking Grids.
 





720-0697E Heat Plates

CLA-TS0157-X3
Click for photos
SET OF THREE/3 PACK Stainless steel heat plate/Flame Tamer for Nexgrill model 720-0697E. Made in USA.

NOTE: Sometimes shipped with vinyl peel-off coating. Remove before use.

Part Number: CLA-TS0157-X3
Dimension Front-to-Back: 14 9/16”
Dimension Side-to-Side: 3 1/4”
Material: stainless steel
Weight: 2.16

$48.78
 
Qty
 

CLA-TS0157-X4
Click for photos
SET OF FOUR/4 PACK Stainless steel heat plate/Flame Tamer for Nexgrill model 720-0697E. Made in USA.

NOTE: Sometimes shipped with vinyl peel-off coating. Remove before use..

Part Number: CLA-TS0157-X4
Dimension Front-to-Back: 14 9/16”
Dimension Side-to-Side: 3 1/4”
Material: stainless steel
Weight: 2.88

$62.56
 
Qty
 

97371-X6
Click for photos
Porcelain steel Flame Tamers for Nexgrill model 720-0697E. SET OF SIX.

Part Number: 97371-X6
Dimension Front-to-Back: 14 9/16”
Dimension Side-to-Side: 3 1/4”
Material: porcelain steel
Weight: 3.3

$112.98
 
Qty
 

GMNGHP1
Click for photos
Grillmaster Heat Plate for Nexgrill model 720-0697E.

Part Number: GMNGHP1
Dimension Front-to-Back: 14 1/4”
Dimension Side-to-Side: 3 3/8”
Material: stainless steel
Weight: 0.81

$17.61
 
Qty
 

==> All Nexgrill Heat Plates.
 





720-0697E Igniter Components

03380
Click for photos
Universal battery powered push button ignitor.
  • 1.5 volt
  • Has five (5) terminals (male spade connector)
  • Uses a single AA battery (not included))
  • 03610 and 03620 wires are commonly used with this igniter (not included)
  • Requires 7/8” mounting hole
  • Overall dimensions: 2” x 3 3/8” x 3”
  • Some original igniters had an integrated ground wire. Use wire part# 03620 for this purpose.

For more information about ignition systems and components, please see article Ignition 101 in our help center.



Part Number: 03380
Dimensions: 3 5/16” x 2”
Weight: 0.7

$39.86
 
Qty
 

03750
Click for photos
20” Ignitor adapter wire with female spade connector and male round connector. Used primarily on Ducane models 7100 and 7200 to extend the wire from the 03758 collector box and electrode to the electronic spark generator (igniter).

For more information about ignition systems and components, please see article Ignition 101 in our help center.



Part Number: 03750
Dimensions: 1/16
Weight: 0.05

$6.01
 
Qty
 

04432
Click for photos
Electrode with 24.5” wire that has a female spade/flat end. To lengthen the wire use adapter # 03198 and extension wire # 03750.

For more information about ignition systems and components, please see article Ignition 101 in our help center.



Part Number: 04432
Dimensions: 4”
Material: ceramic
Weight: 0.1

$10.35
 
Qty
 

04433
Click for photos
Electrode with approximately 25” wire; female spade connector.

For more information about ignition systems and components, please see article Ignition 101 in our help center.



Part Number: 04433
Weight: 0.2

$10.35
 
Qty
 

IG-46B
Click for photos
Universal extention wire, male spade end & female round end.

For more information about ignition systems and components, please see article Ignition 101 in our help center.



Part Number: IG-46B
Dimensions: 2 1/2
Weight: 0.10

$4.37
 
Qty
 

==> All Nexgrill Igniter Components.
 





720-0697E Heat indicators and Meat Thermometers

00012
Click for photos
Round 2 3/8” diameter heat indicator, includes one wing nut and one locking nut.
  • Requires minimum 3/8” mounting hole
  • Single 1 3/8” probe
  • Threaded portion of probe stops at 1/2” from base
  • See photo for details


Part Number: 00012
Dimensions: 2 3/8” x 2 3/8”
Weight: 0.1

$15.90
 
Qty
 

==> All Nexgrill Heat indicators and Meat Thermometers.
 





720-0697E Accessories

FS-1
Click for photos
Fish Spatula. Stainless steel fish spatula with genuine rosewood handle. 18 1/2”. 10” spatula width.

Part Number: FS-1
Dimensions: 18 1/2
Material: stainless steel
Weight: 1.0

$17.27
 
Qty
 

BB-5
Click for photos
Basting brush with angled oak handle. 18” overall length.

Part Number: BB-5
Dimensions: 18
Weight: 0.8

$8.84
 
Qty
 

WB-3
18” long wood handle brass bristle grid brush with scraper and leather hang strap.

Part Number: WB-3
Dimensions: 18
Weight: 0.59

$12.50
 
Qty
 

==> All 720-0697E Accessories.
 



BBQ Part Categories





















 
 

Nexgrill model 720-0697E - Sunday, Jan 26 2025

Return to Nexgrill grills main page



More Nexgrill grill models we have parts for
720-0041 | 720-0047 | 720-0047-U | 720-0050-LP | 720-0055 | 720-0057-3B | 720-0057-4B | 720-0058 | 720-0058-LP | 720-0058-NG | 720-0061 | 720-0061-LP | 720-0062-LP | 720-0063-LP | 720-0070-LP | 720-0072 | 720-0077-LP | 720-0082-S | 720-0082-S-05 | 720-0082-S-LP | 720-0083-04R | 720-0099-NG | 720-0100-NG | 720-0101-NG | 720-0103-LP | 720-0104-NG | 720-0108 | 720-0125-FM | 720-0125-LP | 720-0133-LP | 720-0133-NG | 720-0138-NG | 720-0139-NG | 720-0140 | 720-0140-LP | 720-0141-LP | 720-0142-LP | 720-0145-LP | 720-0145-NG | 720-0150-LP | 720-0151-NG | 720-0152-LP | 720-0152-NG | 720-0163 | 720-0164 | 720-0165 | 720-0170 | 720-0171 | 720-0193 | 720-0230 | Complete list of Nexgrill grill models...



*Orders for Nexgrill grill model 720-0697E $49 and over ship free to the lower 48 states.
See shipping policy below for more info.


Home | About Us | Contact Us | Privacy Policy | Shipping Policy | Return Policy
January 26, 2025