Sams GR2150901-MM-00 Grill Parts

Stainless steel tube burners for Sams model GR2150901-MM-00. SET OF FOUR (4).

Includes:

li>(4) SS tube burner
• Electrode mounting brackets
• Spider exclusion screens
• Adjustable air shutters.

WARNING: Measure your existing burners before purchasing replacements to determine the length you need. For reasons unknown to us, some versions of this grill model (GR2150901-MM-00) use the 15 3/8” 16231 burner, while others use the 17 1/2” 16261 burner. Measure and order accordingly.

Part Number: 16231-X4
Dimensions: 15 3/8” x 1”
Material: stainless steel
Weight: 2.0

Stainless steel tube burners for Sams model GR2150901-MM-00. SET OF FOUR (4).

Includes:

• (4) SS tube burner
• Electrode mounting brackets
• Spider exclusion screens
• Adjustable air shutters.

WARNING: Measure your existing burners before purchasing replacements to determine the length you need. For reasons unknown to us, some versions of this grill model (GR2150901-MM-00) use the 15 3/8” 16231 burner, while others use the 17 1/2” 16261 burner. Measure and order accordingly.

Part Number: 16261-X4
Dimensions: 17 1/2” x 1”
Material: stainless steel
Weight: 2.4

Stainless steel tube burner for Sams model GR2150901-MM-00. Includes

• SS tube burner
• Electrode mounting bracket
• Spider exclusion screen
• Adjustable air shutter.

WARNING: Measure your existing burners before purchasing replacements to determine the length you need. For reasons unknown to us, some versions of this grill model (GR2150901-MM-00) use the 15 3/8” 16231 burner, while others use the 17 1/2” 16261 burner. Measure and order accordingly.

Part Number: 16261
Dimensions: 17 1/2” x 1”
Material: stainless steel
Weight: 0.6

Stainless steel burner for Sams model GR2150901-MM-00.

Part Number: SCTB1
Dimensions: 15 3/8
Material: stainless steel
Weight: 0.43

Premium Stainless Steel BBQ Grill / Cooking Grates for Sams model GR2150901-MM-00. SET OF TWO (2).

• Made in USA
• 304 commercial grade stainless steel
• 3/8” Solid stainless rods
• Sold as a set of two (2) grates

NOTE: This cooking grates set of two replaces the orginal set of three cooking grates.

Part Number: MM-GRATES
Material: stainless steel
Weight: 21.40

Stainless steel Heat Distribution Plate also known as a Flame Tamer and Heat Plate for Sams model GR2150901-MM-00. Fits Member's Mark grill model GR2150901-MM-00. Sold individually, four required. Made in USA.

NOTE: Sometimes shipped with vinyl peel-off coating. Remove before use.

Part Number: CLA-TS0420
Dimension Front-to-Back: 16”
Dimension Side-to-Side: 5”
Material: stainless steel
Weight: .90

Burner mounted electrodes with male spade connectors. SET OF FOUR (4). Includes small mounting bolts and nuts.

• Wire not included. Commonly used with wire part# 03610.
• Female spade connector on wire connects to male spade connector of electrode.
• If used with existing wire, confirm connecting end of wire is a female spade connector
• Usually, one electrode required per burner

NOTE: Electrodes provide the spark that ignites the gas when the ignitor button is depressed, or the knob is turned. They're the spark plug of the grill. ==> For more information on grill ignition systems, including how to connect electrodes to spark generators/ignitors, see article Ignition 101 in our help center.

Part Number: 04022-X4
Material: ceramic
Weight: 0.4

46” Wire with female spade connectors and square plastic connectors.

For more information about ignition systems and components, please see article Ignition 101 in our help center.

Part Number: IG-30B
Dimensions: 46
Weight: 0.1

Electrode to Fit Many Import Grills Including some Kenmore, BBQ Pro, Sam's Club, K-Mart, Etc….

For more information about ignition systems and components, please see article Ignition 101 in our help center.

Part Number: IG-31B
Weight: .05

Universal premium quality stainless steel warming rack. You simply can't buy a better quality warming rack than this, which weighs in at almost 5lbs of solid 304 grade stainless steel. This super heavy-duty warming rack was made to replace the porcelain coated steel racks found on BBQ grills made by The Great Outdoors Grill Company, but can be used in many other different grills.

• Far superior to the original porcelain coated steel rack
• Rests on your existing cooking grids.
• Solid 1/4” 304 stainless steel rods.
• Stands 3.75 inches tall.
• Made in USA.

WARNING: Before ordering this universal rack, please verify your grill has enough space to accommodate it. If you need to return, you will be responsible for return shipping, and the original out bound shipping fee will be deducted from the refund. What's required?

• Your grill needs to be at least 24” wide on the inside . The warming rack is 6.25” front to back and stands 3.75” tall.
• Notice the shape of the warming rack. Determine if the lid of your grill can easily close with the warming rack inside along with food placed on top of the rack.
  
  Part Number: CLA-WS0040
  Dimensions: 6 1/4” x 22 7/8”
  Material: stainless steel
  Weight: 4.8

Basting brush with angled oak handle. 18” overall length.

Part Number: BB-5
Dimensions: 18
Weight: 0.8

Venturi Tube 12” Brush. Recommended by all grill manufacturers. Specially designed flexible brush to clean venturis of spider webs and other obstructions that can cause flashback fires. Stainless steel.

Part Number: VTC-B
Material: stainless steel
Weight: 0.3