S.R. Potten CG7200LP Grill Parts

Highest quality replacement parts for your S.R. Potten CG7200LP - Free USA shipping $49 or more* - No Sales Tax*

S.R. Potten CG7200LP owners manual and diagrams

Diagrams & owners manual not available for grill model# CG7200LP. If you have a manual you're willing to share, please click here to send us an email with the attached manual. Thank You!

Replacement grill parts for the S.R. Potten model: CG7200LP

This page shows all of the parts we know fit model S.R. Potten CG7200LP. If the part you're shopping for isn't included below, you might find it using the category buttons on the right side of the page. For example, if your looking for a burner and there are none here, click the burner button to see all the burners we have for S.R. Potten grills. You will need to know the dimensions of your existing grids to help you find the right part.

To get the correct S.R. Potten CG7200LP BBQ parts

You should measure your existing parts and compare them to what we show here. This is best done with them removed from the grill.
Verify your S.R. Potten model number by checking the CSA appliance tag on your grill to make sure you have the correct model number. Do not rely solely on the owners manual as these are frequently mixed up at retail stores when the grills are assembled. You'd be surprised at how many folks have the wrong owners manual.

CG7200LP Burners

SCTB5

Click for photos

Sam's Club burner W/ Lip like OEM for S.R. Potten model CG7200LP.

Part Number: SCTB5
Dimensions: 14 3/4
Material: stainless steel
Weight: 0.7

==> All S.R. Potten Burners.

CG7200LP Cooking Grids

506S3

Click for photos

Stainless steel cooking grid set for S.R. Potten model CG7200LP.

5/16” diameter stainless rods
304 stainless steel

Part Number: 506S3
Dimension Front-to-Back: 19 1/8”
Dimension Side-to-Side: 32 3/8”
Material: stainless steel
Weight: 15.1

==> All S.R. Potten Cooking Grids.

CG7200LP Heat Plates

CLA-TS0314

Click for photos

Stainless steel Savor Plate, also known as Flamer Tamer and Heat Plate for S.R. Potten model CG7200LP. Sold individually. Made in USA.

NOTE: Sometimes shipped with vinyl peel-off coating. Remove before use.

Part Number: CLA-TS0314
Dimension Front-to-Back: 16 3/8”
Dimension Side-to-Side: 4 1/16”
Material: stainless steel
Weight: .75

SCHP4

Click for photos

Stainless steel heat plate; also referred to as a flame tamer and savor plate for S.R. Potten model CG7200LP.

Part Number: SCHP4
Dimension Front-to-Back: 16 3/8”
Dimension Side-to-Side: 3 13/16”
Material: stainless steel
Weight: 1.0

==> All S.R. Potten Heat Plates.

CG7200LP Igniter Components

10342-T14

Click for photos

21” wire for side burner or other applications. One female spade connector, one female round connector.

For more information about ignition systems and components, please see article Ignition 101 in our help center.

Part Number: 10342-T14
Dimensions: 21
Weight: 0.05

IG-17B

Click for photos

Stainless steel collector box and ceramic electrode with round connector. Includes mounting nuts and washer.

For more information about ignition systems and components, please see article Ignition 101 in our help center.

Part Number: IG-17B
Weight: 0.11

IGEIB6-B

Click for photos

Battery powered push button igniter.

Has six (6) spade type male connectors.
Uses 1 AA battery (not supplied)
Requires 7/8” mounting hole.

For more information about ignition systems and components, please see article Ignition 101 in our help center.

Part Number: IGEIB6-B
Weight: 0.3

IG-7B

Click for photos

20” igniter wire with female spade and round connector.

For more information about ignition systems and components, please see article Ignition 101 in our help center.

Part Number: IG-7B
Weight: 0.02

IG-30B

Click for photos

46” Wire with female spade connectors and square plastic connectors.

For more information about ignition systems and components, please see article Ignition 101 in our help center.

Part Number: IG-30B
Dimensions: 46
Weight: 0.1

IG-48B

Click for photos

16” Universal Ignitor Wire

For more information about ignition systems and components, please see article Ignition 101 in our help center.

Part Number: IG-48B
Dimensions: 16
Weight: 0.05

IG-20B

Click for photos

Burner-mounted ceramic igniter electrode with mounting bracket and hardware.

For more information about ignition systems and components, please see article Ignition 101 in our help center.

Part Number: IG-20B
Weight: 0.05

==> All S.R. Potten Igniter Components.

CG7200LP Accessories

00030

Click for photos

EZ Check Gas level indicator. Accurate from -22° to 104°F. Magnetic back. Works on all sizes of tanks.

Part Number: 00030
Weight: 0.1

WB-1

12” long wood handle brass bristle grid brush with scraper and leather hang strap.

Part Number: WB-1
Dimensions: 12
Weight: 0.4

==> All CG7200LP Accessories.

BBQ Part Categories

S.R. Potten grill model CG7200LP - Sunday, Jan 26 2025

Return to S.R. Potten grills main page

More S.R. Potten grill models we have parts for

GC616-NG | GC6500 | GC716 | GC719 | GC729 | GC729-NG | GC7500 | GC7550 | GC816 | GH4600 | MLS972 | PAT502 | PR364LP | PR8100 | PR9250 | SK472B | SS42-B | SS42-B-NG | SS42-SB | SS42-SB-NG | SS454-B-NG | SS48055LP | SS48055NG | SS50072LP | SS50072NG | SS525LP | SS525NG | SS54 | SS54-LP | SS60884 | SS60884LP | SS60884NG | SS62884LP | SS62884NG | SS64-B | SS64-B-NG | SS64-LP | SS64-NG | SS706 | SS706-108 | SS72-B | SS72-LP | SS72-NG | SS73 | X1960 | B-5008 | B-8800 | B2618-SB | B5016-SB | BG2503-B | Complete list of S.R. Potten grill models...

*Orders for S.R. Potten grill model CG7200LP $49 and over ship free to the lower 48 states.
See shipping policy below for more info.

Home | About Us | Contact Us | Privacy Policy | Shipping Policy | Return Policy
January 26, 2025