Sunbeam ST5402RB Grill Parts

Highest quality replacement parts for your Sunbeam ST5402RB - Free USA shipping $49 or more* - No Sales Tax*

Sunbeam ST5402RB owners manual and diagrams

Diagrams & owners manual not available for grill model# ST5402RB. If you have a manual you're willing to share, please click here to send us an email with the attached manual. Thank You!

Replacement gas grill parts for Sunbeam model: ST5402RB

All of the parts we have for Sunbeam ST5402RB are shown on this page. If the part you're shopping for isn't included below, you might find it using the category buttons on the right side of the page. For example, if your looking for a Flame Tamer/Heat Plate and there are none here, click the Heat Plate button to see all of the Heat Plates we have for Sunbeam grills. You will need to know the dimensions of your existing grids to help you find the right part.

To get the correct Sunbeam ST5402RB BBQ parts

You should measure your existing parts and compare them to what we show here. This is best done with them removed from the grill.
Verify your Sunbeam model number by checking the CSA appliance tag on your grill to make sure you have the correct model number. Do not rely solely on the owners manual as these are frequently mixed up at retail stores when the grills are assembled. You'd be surprised at how many folks have the wrong owners manual.

ST5402RB Venturis

Click for photos

Universal Spider Guards. Helps prevent dangerous flashback fires caused by spider webs in venturi tubes.Stainless steel spider guards slip over the air shutter on most venturi tubes to help keep the spiders out. For 3/4” venturi tubes.

Part Number: SG-B
Material: stainless steel
Weight: 0.1

==> All Sunbeam Venturis.

ST5402RB Cooking Grids

Click for photos

Cooking Grid Stainless Steel Prochef for Sunbeam model ST5402RB.

Part Number: CG-50SS
Dimension Front-to-Back: 14 1/2”
Dimension Side-to-Side: 10 1/2”
Material: stainless steel
Weight: 2.80

Click for photos

Premium quality stainless steel cooking grids for Sunbeam model ST5402RB. SET OF TWO (2). Far superior to the porcelain coated steel grids it replaces.

Made in USA
304 commercial grade stainless steel
.225 diameter solid stainless rods

Each panel measures 14 1/2” x 10 1/2”
Overall dimensions: 14 1/2” x 21”

.

Part Number: CG-50SS-X2
Dimension Front-to-Back: 14 1/2”
Dimension Side-to-Side: 21”
Material: stainless steel
Weight: 5.6

Click for photos

Commercial 304 grade stainless steel cooking grid with 1/4” diameter rods for Sunbeam model ST5402RB. Sold individually. Made in USA.

Part Number: CG-53SS
Dimension Front-to-Back: 14 3/4”
Dimension Side-to-Side: 21 1/2”
Material: Stainless steel
Weight: 5

==> All Sunbeam Cooking Grids.

ST5402RB Rock/Briquette Grates

Click for photos

Rock grate for holding lava rock or ceramic briquettes.

Part Number: BG-43
Dimension Front-to-Back: 12 1/2”
Dimension Side-to-Side: 20 3/16”
Material: carbon steel
Weight: 3.6

==> All Sunbeam Rock/Briquette Grates.

ST5402RB Heat Plates

Heat Plate/ Flame Tamer not known for Sunbeam model ST5402RB. Our parts information for this grill model is incomplete, and we really don't know with certainty which heat plate fits this model. It may be that we have the part but don't show it here due to data or other error.

If you know the original OEM part number, try searching for it in the search box at the top of this page.

You can also browse through all of the heat plates we carry for your brand grill. If we don't have the exact fit for your grill, we may have a suitable replacement part. Measure your existing part so you'll know exactly what size is needed.

If you have this grill model and know the number and dimensions of your original heat plates, click here to send an email to our GrillDr that includes this information. We greatly appreciate your help.

Part Number: HP-DUMMY
Weight: 1.0

==> All Sunbeam Heat Plates.

ST5402RB Igniter Components

Click for photos

OEM style collector box.

Bolts onto burner with venturi
Used with burners 11502, 15102, 15202, and 15402
Use original electrode; replacement electrode # 04510 has been discontinued

For more information about ignition systems and components, please see article Ignition 101 in our help center.

Part Number: 05152
Material: stainless steel
Weight: 0.1

Click for photos

21” wire for side burner or other applications. One female spade connector, one female round connector.

For more information about ignition systems and components, please see article Ignition 101 in our help center.

Part Number: 10342-T14
Dimensions: 21
Weight: 0.05

Click for photos

20” igniter wire with female spade and round connector.

For more information about ignition systems and components, please see article Ignition 101 in our help center.

Part Number: IG-7B
Weight: 0.02

Click for photos

Ignitor electrode and collector box assembly. Fits all grills equiped with the Charbroil Masterflame and MasterFlame II burner systems, including grill brands Charbroil, Coleman, Kenmore, and Thermos. Fits on our burner part numbers BBC, LBBC, TBBC, and TLBBC.

Gas collector box
Ceramic electrode and wire
Mounting hardware

For more information about ignition systems and components, please see article Ignition 101 in our help center.

Part Number: IG-11B
Weight: 0.3

==> All Sunbeam Igniter Components.

ST5402RB Warming Racks

Click for photos

All purpose warming rack.

Part Number: AP-2
Dimensions: 4 5/8” x 19 3/4”
Material: Chrome steel
Weight: 1.0

==> All Sunbeam Warming Racks.

ST5402RB Accessories

Click for photos

Durable 2 5/16” round briquettes

Self-cleaning
Control flare-ups while holding an even heat pattern.
About 53 pieces, covers approximately 275 sq. inches.
Fits all gas grills

Part Number: BQ-5
Weight: 7.2

Click for photos

Ultimate ceramic grill bricks. 18 ceramic bricks covers 165 sq. inches. Designed to replace existing lava rock and ceramic briquettes.

Self cleaning
Reduces flare-ups
Eliminates cold spots
Lasts longer
Stays hotter longer
Each brick measures 3” x 3” x3/8”

Part Number: 43118
Weight: 2.7

Click for photos

Natural lava rock processed and screened for uniformity. 7 lb. bag is enough for all full sized grills. Click the photo to find easy steps for installing lava rocks.

Part Number: 45887
Material: pummise
Weight: 7.0

12” long wood handle brass bristle grid brush with scraper and leather hang strap.

Part Number: WB-1
Dimensions: 12
Weight: 0.4

==> All ST5402RB Accessories.

BBQ Part Categories

Sunbeam model ST5402RB - Sunday, Jan 26 2025

Return to Sunbeam grill parts main page

More Sunbeam grill models we have parts for
33MWD8 \| 33YDL \| 33YDM \| 33YDW7 \| 34212 \| 34222 \| 3428-D \| 3438-B \| 34401 \| 34402 \| 3448 \| 3448-D \| 3448-Z \| 3457 \| 3457 series \| 3457D \| 3467 \| 3467-B \| 3467-D \| 3467-E \| 3467-H \| 3467-L \| 3467-R \| 3468-D \| 3468-L \| 3473 series \| 3474 \| 3474 series \| 3474R \| 3475 \| 3475 series \| 3475T \| 3476 \| 3476-B \| 3476-D \| 3476-L \| 3476-R \| 3478 \| 3481-L \| 3481-N \| 3484 series \| 3485-P \| 3486 series \| 3487 \| 3493 \| 3494 series \| 3495 series \| 3496 series \| 34MW-7 \| 34MWR8 \| Complete list of Sunbeam grill models...

More Sunbeam grill models we have parts for

33MWD8 | 33YDL | 33YDM | 33YDW7 | 34212 | 34222 | 3428-D | 3438-B | 34401 | 34402 | 3448 | 3448-D | 3448-Z | 3457 | 3457 series | 3457D | 3467 | 3467-B | 3467-D | 3467-E | 3467-H | 3467-L | 3467-R | 3468-D | 3468-L | 3473 series | 3474 | 3474 series | 3474R | 3475 | 3475 series | 3475T | 3476 | 3476-B | 3476-D | 3476-L | 3476-R | 3478 | 3481-L | 3481-N | 3484 series | 3485-P | 3486 series | 3487 | 3493 | 3494 series | 3495 series | 3496 series | 34MW-7 | 34MWR8 | Complete list of Sunbeam grill models...