Vermont Castings CF9030N Grill Parts

Highest quality replacement parts for your Vermont Castings CF9030N - Free USA shipping $49 or more* - No Sales Tax*

Vermont Castings CF9030N owners manual and diagrams

Diagrams & owners manual not available for grill model# CF9030N. If you have a manual you're willing to share, please click here to send us an email with the attached manual. Thank You!

Replacement gas grill parts for Vermont Castings model: CF9030N

This page shows all of the parts we know fit model Vermont Castings CF9030N. We might not show the part you need here but we may still have it, or a functional equivalent. In this case, try the category buttons on the right. For example, if your looking for an ignitor, or other ignition components, and there are none here, click the ignition button to see what we have for Vermont Castings grills. Knowing the dimensions of your existing part will help you find the right part.

To get the correct Vermont Castings CF9030N BBQ parts

You should measure your existing parts and compare them to what we show here. This is best done with them removed from the grill.
Verify your Vermont Castings model number by checking the CSA appliance tag on your grill to make sure you have the correct model number. Do not rely solely on the owners manual as these are frequently mixed up at retail stores when the grills are assembled. You'd be surprised at how many folks have the wrong owners manual.

CF9030N Burners

CLA-MS0227

Click for photos

Burner mounting plate for Vermont Castings model CF9030N. This part is used to reinforce the front grill housing so the burner can be mounted to the grill. In some cases, the grill housing has rusted or corroded such that the burner cannot be properly mounted to the front of the grill.

Sold individually, number required varies. Use one per burner.
Includes mounting bolt and nut
Includes extra holes for mounting to grill, if necessary.
Comes with complete installation instructions.

For models:

CF9080/85/86
VCS300/3500/35BI/4000/4005/5000/5005/5010/50BI
VCS3507/4007/5007/3507BI/5007BI

Made in USA

Part Number: CLA-MS0227
Dimensions: 3 3/4” x 4 15/16”
Material: stainless steel
Weight: 0.11

03501

Click for photos

Burner mounting plate for Vermont Castings model CF9030N. This part is used to reinforce the front grill housing so the burner can be mounted to the grill. In some cases, the grill housing has rusted or corroded such that the burner cannot be properly mounted to the front of the grill.

Premium grade stainless steel
Includes gasket and mounting screw
Comes with complete installation instructions
Sold individually.

For models:

CF9080/85/86
VCS300/3500/35BI/4000/4005/5000/5005/5010/50BI
VCS3507/4007/5007/3507BI/5007BI

Part Number: 03501
Dimensions: 3 3/4” x 4”
Material: stainless steel
Weight: 0.16

VTB1

Click for photos

Commercial premium grade stainless steel burner for Vermont Castings model CF9030N.

Part Number: VTB1
Dimensions: 17
Material: stainless steel
Weight: 1.0

==> All Vermont Castings Burners.

CF9030N Burner Brackets and Carryovers

50001300B / CLA-MS0112

Click for photos

Stainless steel Flash Tube burner support bracket. Made in USA.

Part Number: CLA-MS0112 (Replaces Vermont Castings 50001300B)
Dimensions: 2” x 13 1/4”
Material: stainless steel
Weight: 0.30

==> All Vermont Castings Burner Brackets and Carryovers.

CF9030N Cooking Grids

CG-51SS

Click for photos

Cooking Grid 304 Grade Stainless Steel for Vermont Castings model CF9030N.225” Rods.

Part Number: CG-51SS
Dimension Front-to-Back: 16 1/2”
Dimension Side-to-Side: 11 1/4”
Material: stainless steel
Weight: 3.50

CG-92P-CI

Click for photos

Cast Iron cooking grid for Vermont Castings model CF9030N.

Part Number: CG-92P-CI
Dimension Front-to-Back: 16 1/2”
Dimension Side-to-Side: 11 3/8”
Material: cast iron
Weight: 10

CG-92P-CI-X2

Click for photos

Cast iron cooking grids for Vermont Castings model CF9030N. SET OF TWO (2) panels.

Porcelain treated, matte finish
Each panel measures 16 1/2” x 11 3/8”
Overall dimensions: 16 1/2” x 22 3/4”

Part Number: CG-92P-CI-X2
Dimension Front-to-Back: 16 1/2”
Dimension Side-to-Side: 22/4”
Material: cast iron
Weight: 20

CG-51SS-X2

Click for photos

Premium quality stainless steel cooking grids for Vermont Castings model CF9030N. SET OF TWO (2). Far superior to the porcelain coated steel grids it replaces.

Made in USA
304 commercial grade stainless steel
.225 diameter solid stainless rods

Each panel measures 16 1/2” x 11 1/4”
Overall dimensions: 16 1/2” x 22 1/2”

.

Part Number: CG-51SS-X2
Dimension Front-to-Back: 16 1/2”
Dimension Side-to-Side: 22 1/2”
Material: stainless steel
Weight: 7.0

==> All Vermont Castings Cooking Grids.

CF9030N Heat Plates

CLA-TS0016-X3

Click for photos

SET OF THREE/3 PACK Stainless steel Flame Tamer for Vermont Castings model CF9030N. Sold individually, number required varies. Made in USA.

NOTE: Sometimes shipped with vinyl peel-off coating. Remove before use.

Part Number: CLA-TS0016-X3
Dimension Front-to-Back: 14 1/2”
Dimension Side-to-Side: 7 1/4”
Material: stainless steel
Weight: 3.6

VCHP1

Click for photos

Stainless steel heat plate for Vermont Castings model CF9030N. Some OEM originals were porcelain coated steel. This stainless version, which resists rust and corrosion better, is far superior to original porcelain part.

Part Number: VCHP1
Dimension Front-to-Back: 14 1/2”
Dimension Side-to-Side: 7 1/4”
Material: stainless steel
Weight: 0.7

50000877 / CLA-TS0016

Click for photos

Stainless steel Flame Tamer for Vermont Castings model CF9030N. Sold individually, number required varies. Made in USA.

NOTE: Sometimes shipped with vinyl peel-off coating. Remove before use.

Part Number: CLA-TS0016 (Replaces Vermont Castings 50000877)
Dimension Front-to-Back: 14 1/2”
Dimension Side-to-Side: 7 1/4”
Material: stainless steel
Weight: 1.3

==> All Vermont Castings Heat Plates.

CF9030N Igniter Components

10342-T14

Click for photos

21” wire for side burner or other applications. One female spade connector, one female round connector.

For more information about ignition systems and components, please see article Ignition 101 in our help center.

Part Number: 10342-T14
Dimensions: 21
Weight: 0.05

IG-7B

Click for photos

20” igniter wire with female spade and round connector.

For more information about ignition systems and components, please see article Ignition 101 in our help center.

Part Number: IG-7B
Weight: 0.02

50000071 / IG-20B

Click for photos

Burner-mounted ceramic igniter electrode with mounting bracket and hardware.

For more information about ignition systems and components, please see article Ignition 101 in our help center.

Part Number: IG-20B (Replaces Vermont Castings 50000071)
Weight: 0.05

50000358 / UP-8B

Click for photos

Universal 3 outlet rotary spark generator. Includes knob.

For more information about ignition systems and components, please see article Ignition 101 in our help center.

Part Number: UP-8B (Replaces Vermont Castings 50000358)
Weight: 0.3

==> All Vermont Castings Igniter Components.

CF9030N Grease Trays

CLA-DS0226

Click for photos

Stainless steel version of grease tray OEM # 50001301. NOTE: Sometimes shipped with protective vinyl peel-off coating. Remove before use. Made in USA

Part Number: CLA-DS0226
Dimensions: 9 5/8” x 22 1/16”
Material: stainless steel
Weight: 2.25

==> All Vermont Castings Grease Trays.

CF9030N Regulators and Hoses

ASCPL-1

Click for photos

Five piece 3/8” natural gas quick disconnect set includes:

Part ASCPL-2 12ft vinyl 3/8” ID Sturgis hose (3/8” inside diameter outside diameter about 1/2”) with solid brass fittings
Part ASCPL-3 Sturgis brand 3/8” quick connect brass coupler
Hansen & Sturgis dust cover
plastic dust plug
Plastic 3/8 MPT Snap Tite
Suitable up to approximately 60,000 BTU.

Part Number: ASCPL-1
Weight: 3.0

ASCPL-3

Click for photos

Brass 3/8” Sturgis quick connect coupler for use with hose part# ASCPL-2 (sold separately). Also, see part# ASCPL-1 for hose and coupler set.

Part Number: ASCPL-3
Weight: 0.4

50000198 / ASCPL-2

Click for photos

12ft vinyl 3/8” ID natural gas Sturgis hose (inside diameter 3/8” and outside diameter about 1/2”) with solid brass fittings. Use with brass coupler part# ASCPL-3 (not included). See part# ASCPL-1 for hose and coupler set.

Part Number: ASCPL-2 (Replaces Vermont Castings 50000198)
Weight: 2.5

50003647 / HR-4B

Click for photos

Type 1 LP Regulator with 22” Pressure Hose and 3/8” Female Flare Fitting.FITS: Up to 60,000 BTUs

Part Number: HR-4B (Replaces Vermont Castings 50003647)
Dimensions: 22
Weight: 0.8

==> All Vermont Castings Regulators and Hoses.

CF9030N Heat indicators and Meat Thermometers

10571-6

Click for photos

Heat indicator. About 2 3/8” wide and 2” high. The threaded stem is about 5 /16” diameter and 1 1/8” long.

Part Number: 10571-6
Weight: 0.12

==> All Vermont Castings Heat indicators and Meat Thermometers.

CF9030N Accessories

WB-8RH

Click for photos

Replacement brass bristle brush head for WB-8 brush. Screws included.

Part Number: WB-8RH
Dimensions: 18 1/2
Material: stainless steel
Weight: 0.2

==> All CF9030N Accessories.

BBQ Part Categories

Vermont Castings model CF9030N - Sunday, Jan 26 2025

Return to Vermont Castings grills main page

More Vermont Castings grill models we have parts for

Experience | Extreme | Extreme Built-in | Extreme Limited Edition | G36601 | G36602 | G53901 | G53902 | G54001 | G54002 | Marvel | Sizzler | Sizzler Built-in | VC0620AP-NP | VC0620P | VC0680AP | VC0680AP-NP | VC0680N | VC0680P | VC100-A | VC100-B | VC100-C | VC200-A | VC200-B | VC200-C | VC200-D | VC200-E | VC2002BN | VC30 | VC3505 | VC400-A | VC400-B | VC400-C | VC400-D | VC50-A | VC50-B | VC500 | VC75-A | VC75-B | VCS3000 | VCS3006 | VCS3008 | VCS3018 | VCS3028 | VCS3038 | VCS3500 | VCS3500BI | VCS3505 | VCS3505BI | Complete list of Vermont Castings grill models...

*Orders for Vermont Castings grill model CF9030N $49 and over ship free to the lower 48 states.
See shipping policy below for more info.

Home | About Us | Contact Us | Privacy Policy | Shipping Policy | Return Policy
January 26, 2025