Viking VGIQ532-3RT1 Grill Parts

PA080050-R2 U-Burner with Drip Shield for Viking model VGIQ532-3RT1. Deluxe center-fed U burner.

• 304 commercial grade stainless steel.
• Includes Stainless Drip Shield B2004921-R2 (installed).
• Includes front and rear mounting brackets.

NOTE: This part is also available in more economical multipacks of two, three, and four pieces.

NOTE: Not a VIKING branded product. This is an aftermarket part designed to replace original Viking burner PA080050 and Drip Shield B2004921.

Part Number: VIK-PA080050-R2 (Replaces Viking VIK-PA080050)
Dimensions: 21 3/4” x 6 3/4”
Material: stainless steel
Weight: 4.7

PA080051-R2-X2 Stainless steel Smoker/Grill Burners with Drip Shields for Viking model VGIQ532-3RT1. SET OF TWO (2).

• Made of 304 commercial grade stainless steel.
• Includes SS Drip Shields B2005324-R (attached).
• Includes front and rear mounting brackets.

NOTE: Not a VIKING branded product. This is an aftermarket part designed to replace original Viking Smoker Burner part PA080051 and Drip Shield part B2005324.

Part Number: VIK-PA080051-R2-X2 (Replaces Viking VIK-PA080051-X2)
Dimensions: 24
Material: stainless steel
Weight: 4.0

PA080051-R2 Stainless steel Smoker/Grill Burner with Drip Shield for Viking model VGIQ532-3RT1..

• Made of 304 commercial grade stainless steel.
• Includes SS Drip Shield B2005324-R (attached).
• Includes front and rear mounting brackets.

NOTE: This part is also available in a 2-pack.

NOTE: Not a VIKING branded product. This is an aftermarket part designed to replace original Viking Smoker Burner part PA080051 and Drip Shield part B2005324.

Part Number: VIK-PA080051-R2 (Replaces Viking VIK-PA080051)
Dimensions: 24
Material: stainless steel
Weight: 2.0

PA060052-R-X2 Porcelain Steel Cooking Grates for Viking model VGIQ532-3RT1. SET OF TWO (2) heavy duty panels with solid 5/16” rods. Porcelain enameled, glossy finish. Also known in Viking documentation as ”Full Grill Grate”, this grate fits numerous Viking grills. See part PA060068-R for a stainless version.

Each panel measures:

• 23 1/4” front-to-back
• 11 1/2” side-to-side

2-Piece set measures:

• 23 1/4” front-to-back
• 23” side-to-side

NOTE: Not a VIKING branded product. This is an aftermarket part designed to replace original Viking grate part PA060052.

Part Number: VIK-PA060052-R-X2 (Replaces Viking VIK-PA060052-X2)
Dimension Front-to-Back: 23 1/4”
Dimension Side-to-Side: 23”
Material: porcelain steel wire
Weight: 16.6

PA060052-R Porcelain Steel Cooking Grates for Viking model VGIQ532-3RT1. Heavy duty grates with solid 5/16” rods. Porcelain enameled, glossy finish. Also known in Viking documentation as ”Full Grill Grate”, this grate fits numerous Viking grills. See part PA060068-R for a stainless version.

Each panel measures:

• 23 1/4” front-to-back
• 11 1/2” side-to-side
• Solid steel 5/16” rods

NOTE: Also available in more economical 2-packs, 3-packs, and 4-packs.

NOTE: Not a VIKING branded product. This is an aftermarket part designed to replace original Viking grate part PA060052.

Part Number: VIK-PA060052-R (Replaces Viking VIK-PA060052)
Dimension Front-to-Back: 23 1/4”
Dimension Side-to-Side: 11 1/2”
Material: porcelain steel wire
Weight: 8.3

PA060068-R-X2 Premium quality heavy duty stainless steel cooking grates for Viking model VGIQ532-3RT1. SET OF TWO (2). Also known in Viking documentation as ”FULL GRATE *SS*”, this grate fits numerous Viking grills. It is the stainless version of PA060052.

• Made in USA
• 304 commercial grade stainless steel
• Large diameter 5/16” solid stainless rods

Each panel measures:

• 23 1/4” front-to-back
• 11 1/2” side-to-side

2-Piece set measures:

• 23 1/4” front-to-back
• 23” side-to-side

NOTE: Not a VIKING branded product. This is an aftermarket part designed to replace original Viking grate part PA060068.

Part Number: VIK-PA060068-R-X2 (Replaces Viking VIK-PA060068-X2)
Dimension Front-to-Back: 23 1/4”
Dimension Side-to-Side: 23”
Material: stainless steel
Weight: 17.2

PA060068-R Premium quality heavy duty stainless steel cooking grate for Viking model VGIQ532-3RT1. Also known in Viking documentation as ”FULL GRATE *SS*”, this grate fits numerous Viking grills. It is the stainless version of PA060052.

• Made in USA
• 304 commercial grade stainless steel
• Large diameter 5/16” solid stainless rods
• Sold individually.

Each panel measures:

• 23 1/4” front-to-back
• 11 1/2” side-to-side

NOTE: Also available in 2-packs, 3-packs, and 4-packs.

NOTE: Not a VIKING branded product. This is an aftermarket part designed to replace original Viking grate part PA060068.

Part Number: VIK-PA060068-R (Replaces Viking VIK-PA060068)
Dimension Front-to-Back: 23 1/4”
Dimension Side-to-Side: 11 1/2”
Material: stainless steel
Weight: 8.6

PA060053-R-X2 Porcelain Steel Cooking Grates for Viking model VGIQ532-3RT1. SET OF TWO (2) heavy duty grates with solid 5/16” rods. Porcelain enameled, glossy finish. Also known in Viking documentation as ”1/2 Grill Grate” or ”HALF GRILL GRATE”, this grate fits numerous Viking grills.

Each panel measures:

• 23 1/4” front-to-back
• 5 3/4” side-to-side

2-Piece set measures:

• 23 1/4” front-to-back
• 11 1/2” side-to-side

NOTE: Not a VIKING branded product. This is an aftermarket part designed to replace original Viking grate part PA060053.

Part Number: VIK-PA060053-R-X2 (Replaces Viking VIK-PA060053-X2)
Dimension Front-to-Back: 23 1/4”
Dimension Side-to-Side: 11 1/2”
Material: porcelain steel wire
Weight: 8.2

PA060053-R Porcelain Steel Cooking Grates for Viking model VGIQ532-3RT1. Heavy duty grates with solid 5/16” rods. Porcelain enameled, glossy finish. Also known in Viking documentation as ”1/2 Grill Grate” or ”HALF GRILL GRATE”, this grate fits numerous Viking grills.

Each panel measures:

• 23 1/4” front-to-back
• 5 3/4” side-to-side

NOTE: Also available in more economical 2-packs..

NOTE: Not a VIKING branded product. This is an aftermarket part designed to replace original Viking grate part PA060053.

Part Number: VIK-PA060053-R (Replaces Viking VIK-PA060053)
Dimension Front-to-Back: 23 1/4”
Dimension Side-to-Side: 5 3/4”
Material: porcelain steel wire
Weight: 4.1

PA060069-R-X2 Premium quality heavy duty stainless steel cooking grates for Viking model VGIQ532-3RT1. SET OF TWO (2). Also known in Viking documentation as ”Half Grate SS*”, this grate fits numerous Viking grills. It is the stainless version of PA060053. It is usually used with one or more PA060068 panels.

• Made in USA
• 304 commercial grade stainless steel
• Large diameter 5/16” solid stainless rods

Each panel measures:

• 23 1/4” front-to-back
• 5 3/4” side-to-side

2-Piece set measures:

• 23 1/4” front-to-back
• 11 1/2” side-to-side

NOTE: Not a VIKING branded product. This is an aftermarket part designed to replace original Viking grate part PA060069.

Part Number: VIK-PA060069-R-X2 (Replaces Viking VIK-PA060069-X2)
Dimension Front-to-Back: 23 1/4”
Dimension Side-to-Side: 11 1/2”
Material: stainless steel
Weight: 8.8

PA060069-R Premium quality heavy duty stainless steel cooking grate for Viking model VGIQ532-3RT1. Also known in Viking documentation as ”Half Grate SS”, this grate fits numerous Viking grills. It is the stainless version of PA060052. It is usually used in pairs with one or more PA060068 panels

• Made in USA
• 304 commercial grade stainless steel
• Large diameter 5/16” solid stainless rods
• Sold individually.

Each panel measures:

• 23 1/4” front-to-back
• 5 3/4” side-to-side

NOTE: Also available in a more economical 2-pack..

NOTE: Not a VIKING branded product. This is an aftermarket part designed to replace original Viking grate part PA060069.

Part Number: VIK-PA060069-R (Replaces Viking VIK-PA060069)
Dimension Front-to-Back: 23 1/4”
Dimension Side-to-Side: 5 3/4”
Material: stainless steel
Weight: 4.4

PK010061-R2 Flavor Grid for Viking model VGIQ532-3RT1. Fits Viking VGBQ/VGIQ E and T series grills. May fit other models.

NOTE: Not a VIKING branded product. This is an aftermarket part designed to replace original Viking Flavor Grid part PK010061.

Part Number: VIK-PK010061-R2 (Replaces Viking VIK-PK010061)
Dimension Front-to-Back: 23 1/8”
Dimension Side-to-Side: 5 3/4”
Material: stainless steel
Weight: 2.7

20” igniter wire with two (2) female spade connectors.

For more information about ignition systems and components, please see article Ignition 101 in our help center.

Part Number: IG-18B
Weight: 0.03

46” Wire with female spade connectors and square plastic connectors.

For more information about ignition systems and components, please see article Ignition 101 in our help center.

Part Number: IG-30B
Dimensions: 46
Weight: 0.1

VIK-PA020036-R Spark Module. 4-Spark electronic ignition module. Requires 1 AA battery (not included).

NOTE: Not a VIKING branded product. This is an aftermarket part designed to replace original Viking grate part PA020036.

For more information about ignition systems and components, please see article Ignition 101 in our help center.

Part Number: VIK-PA020036-R (Replaces Viking VIK-PA020036)
Weight: .33

008091-000-R-X2 SET OF TWO (2) Electrodes with m spade wide connection. Also known in Viking documentation as ”PB040288 IGNITOR KIT”. This part replaces: PB040288, PB040179

Includes short adapter wire (not shown) to convert the wide male spade conector on the electrode to a standard male spade connector. This allows the use of wires with standard spade connectors.

NOTE: Not a VIKING branded product. This is an aftermarket part designed to replace original Viking part 008091-000.

For more information about ignition systems and components, please see article Ignition 101 in our help center.

Part Number: VIK-008091-000-R-X2 (Replaces Viking VIK-008091-000-X2)
Weight: 0.2

008091-000-R Electrode with m spade wide connection. Also known in Viking documentation as ”PB040288 IGNITOR KIT”. This part replaces: PB040288, PB040179

Includes short adapter wire (not shown) to convert the wide male spade conector on the electrode to a standard male spade connector. This allows the use of wires with standard spade connectors.

NOTE: Not a VIKING branded product. This is an aftermarket part designed to replace original Viking part 008091-000.

For more information about ignition systems and components, please see article Ignition 101 in our help center.

Part Number: VIK-008091-000-R (Replaces Viking VIK-008091-000)
Weight: 0.1

Front and back burner mounting brackets for center-fed stainless U burner part# 15481 and VIKU1. Does not include screws. Made in USA.

NOTE: Sometimes shipped with vinyl peel-off coating. Remove before use.

Part Number: CLA-MS0059
Material: stainless steel
Weight: 0.4

EZ Check Gas level indicator. Accurate from -22° to 104°F. Magnetic back. Works on all sizes of tanks.

Part Number: 00030
Weight: 0.1

12” long wood handle brass bristle grid brush with scraper and leather hang strap.

Part Number: WB-1
Dimensions: 12
Weight: 0.4