Barbeques Galore Valves, Orifices, and Manifolds

#59 brass orifice for rotisserie burner. Fits liquid propane (LP) gas grills. Includes brass elbow with 1/4” compression fitting.

Part Number: CLA-VL0251
Material: brass
Weight: 0.15

CLA-VL0251 fits these 11 Barbeques Galore models:
EDV27-BQ (pre 2006) EDV27-BQR EDV27-BQR (pre 2006)	EDV27-BQRL EDV27-BQRL (pre 2006) EDV27-BQRN	EDV27-BQRN (pre 2006) EDV36-BQARL EDV36-BQARL (pre 2006)	EDV36-BQARN EDV36-BQARN (pre 2006)

#55 orifice for infrared burners use on natural Gas grills. Includes brass elbow with 1/4” compression fitting.

Part Number: CLA-VB0246
Dimensions: 3 3/8” x 17 1/4”
Material: stainless steel and ceramic
Weight: 0.3

CLA-VB0246 fits these 11 Barbeques Galore models:
EDV27-BQ (pre 2006) EDV27-BQR EDV27-BQR (pre 2006)	EDV27-BQRL EDV27-BQRL (pre 2006) EDV27-BQRN	EDV27-BQRN (pre 2006) EDV36-BQARL EDV36-BQARL (pre 2006)	EDV36-BQARN EDV36-BQARN (pre 2006)

Small 7mm brass spud orifice. #72 starter hole. Must be drilled to proper drill size.

If you would like us to drill the orifice(s) for you, there is a single $15 fee for this service, which will be added to the order when processed. Please tell us the number of burners in your grill and the total BTUs of your grill (less side burner and rotisserie burner, if any). BTU rating information can usually be found on the grill's CSA certification tag, located somewhere on the grill. Please furnish this, along with any other information you deem relevant, in the Message to CLA box during checkout.

Part Number: 31500
Material: brass
Weight: 0.01

31500 fits these 5 Barbeques Galore models:
3-burner	4-burner	5-burner	XG3TBW	XG3TBWN

Orifice for flame-thrower valves. 6mm head, 4.9mm thread diameter. #72 starter hole, must be drilled to proper drill size.

Part Number: 31300
Weight: 0.01

31300 fits these 2 Barbeques Galore models:
720-0057-3B	720-0057-4B

Clamp-on valve. Does not include orifice. Uses orifice # 31300.

Part Number: 3052C
Dimensions: 4 1/2” x 2 3/8”
Material: brass
Weight: 0.5

3052C fits these 2 Barbeques Galore models:
720-0057-3B	720-0057-4B

Brass valve for DCS.

• For LP and natural gas grills (see below)
• Off position D-Value: 12 o'clock
• Stem diameter: 8mm
• Orifice not included

NOTE: There is a set screw in the stem that allows this valve to be used in both LP or natural gas grills. The valve is shipped with the screw set in LP position. Turn the screw counterclockwise about seven turns for natural gas use.

Part Number: 30171
Dimensions: 3 7/16” x 1 5/16”
Material: brass
Weight: 0.3

30171 fits these 19 Barbeques Galore models:
EDV27-BQ (pre 2006) EDV27-BQL EDV27-BQL (pre 2006) EDV27-BQN	EDV27-BQN (pre 2006) EDV27-BQR EDV27-BQR (pre 2006) EDV27-BQRL	EDV27-BQRL (pre 2006) EDV27-BQRN EDV27-BQRN (pre 2006) EDV36-BQAL	EDV36-BQAL (pre 2006) EDV36-BQAN EDV36-BQAN (pre 2006) EDV36-BQARL	EDV36-BQARL (pre 2006) EDV36-BQARN EDV36-BQARN (pre 2006)

natural gas manifold tube. 4th from right.

Note: Our OEM Turbo and Capt'n Cook parts are genuine factory parts. They were taken from brand new grills that were disassembled for parts. Some parts may show slight evidence of prior assembly, such as a depression where a screw previously attached a part, but are fully functional and guaranteed to be new, never used.

Part Number: 269720
Material: brass/aluminum
Weight: 0.2

269720 fits these 4 Barbeques Galore models:
CG4TCBN	CG4TCBP	CG4TDBRN	CG5TCBN

natural gas manifold tube. 3rd from right.

Note: Our OEM Turbo and Capt'n Cook parts are genuine factory parts. They were taken from brand new grills that were disassembled for parts. Some parts may show slight evidence of prior assembly, such as a depression where a screw previously attached a part, but are fully functional and guaranteed to be new, never used.

Part Number: 269712
Material: brass/aluminum
Weight: 0.2

269712 fits these 6 Barbeques Galore models:
CG3TCBN CG3TDBRN	CG4TCBN CG4TCBP	CG4TDBRN CG5TCBN

natural gas manifold tube. 2nd from right.

Note: Our OEM Turbo and Capt'n Cook parts are genuine factory parts. They were taken from brand new grills that were disassembled for parts. Some parts may show slight evidence of prior assembly, such as a depression where a screw previously attached a part, but are fully functional and guaranteed to be new, never used.

Part Number: 269704
Material: brass/aluminum
Weight: 0.2

269704 fits these 6 Barbeques Galore models:
CG3TCBN CG3TDBRN	CG4TCBN CG4TCBP	CG4TDBRN CG5TCBN

natural gas manifold tube. 1st from right.

Note: Our OEM Turbo and Capt'n Cook parts are genuine factory parts. They were taken from brand new grills that were disassembled for parts. Some parts may show slight evidence of prior assembly, such as a depression where a screw previously attached a part, but are fully functional and guaranteed to be new, never used.

Part Number: 269696
Material: brass/aluminum
Weight: 0.2

269696 fits these 6 Barbeques Galore models:
CG3TCBN CG3TDBRN	CG4TCBN CG4TCBP	CG4TDBRN CG5TCBN

copper flame thrower tube. 4th from right. 410mm in length.

Note: Our OEM Turbo and Capt'n Cook parts are genuine factory parts. They were taken from brand new grills that were disassembled for parts. Some parts may show slight evidence of prior assembly, such as a depression where a screw previously attached a part, but are fully functional and guaranteed to be new, never used.

Part Number: 269647
Material: copper/brass
Weight: 0.1

269647 fits these 4 Barbeques Galore models:
CG4TCBN	CG4TCBP	CG4TDBRN	CG5TCBN

copper flame thrower tube. 3rd from right. 310mm in length.

Note: Our OEM Turbo and Capt'n Cook parts are genuine factory parts. They were taken from brand new grills that were disassembled for parts. Some parts may show slight evidence of prior assembly, such as a depression where a screw previously attached a part, but are fully functional and guaranteed to be new, never used.

Part Number: 269639
Material: copper/brass
Weight: 0.1

269639 fits these 6 Barbeques Galore models:
CG3TCBN CG3TDBRN	CG4TCBN CG4TCBP	CG4TDBRN CG5TCBN

copper flame thrower tube. 2nd from right. 210mm in length.

Note: Our OEM Turbo and Capt'n Cook parts are genuine factory parts. They were taken from brand new grills that were disassembled for parts. Some parts may show slight evidence of prior assembly, such as a depression where a screw previously attached a part, but are fully functional and guaranteed to be new, never used.

Part Number: 269621
Material: copper/brass
Weight: 0.1

269621 fits these 6 Barbeques Galore models:
CG3TCBN CG3TDBRN	CG4TCBN CG4TCBP	CG4TDBRN CG5TCBN

copper flame thrower tube. 1st from right. 150mm in length.

Note: Our OEM Turbo and Capt'n Cook parts are genuine factory parts. They were taken from brand new grills that were disassembled for parts. Some parts may show slight evidence of prior assembly, such as a depression where a screw previously attached a part, but are fully functional and guaranteed to be new, never used.

Part Number: 269613
Material: copper/brass
Weight: 0.1

269613 fits these 6 Barbeques Galore models:
CG3TCBN CG3TDBRN	CG4TCBN CG4TCBP	CG4TDBRN CG5TCBN