Charbroil Valves, Orifices, and Manifolds
In post control valve without manifold or orifice, with 1/8” NPT pipe thread for hood orifice. Fits Charbroil, Falcon, and most twin in post control grills with hood orifice. Orifice not included. Use original or our part #37900.
Part Number: 38800 Dimensions: 3 1/8” x 1 1/4”
Material: brass
Weight: 0.3
| 38800 fits these 15 Charbroil models: |
| | | | |
Valve with 45° angled orifice snout built to accept 11/32 x 32 threaded spud type orifice (not provided); uses orifice # 33200. Mounts to the right side of original up-front control manifold assembly. Valve stem is 8mm, and needs a knob with a 9 D-value. Can use with universal knobs 00110 or 00310 or 01800 depending on needed knob stem length.
Part Number: 38600
Dimensions: 3 9/16” x 1 1/4”
Material: brass
Weight: 0.4
3” valve shaft extender.
Part Number: 38000
Dimensions: 3 1/16” x 0 1/2”
Material: brass
Weight: 0.1
Brass hood orifice with #72 starter hole and 1/8” x 22 threading for use with valves 37700, 37800, and 38800. Must be drilled to proper drill size.
If you would like us to drill the orifice(s) for you, there is a single $15 fee for this service, which will be added to the order when processed. Please tell us the number of burners in your grill and the total BTUs of your grill (less side burner and rotisserie burner, if any). BTU rating information can usually be found on the grill's CSA certification tag, located somewhere on the grill. Please furnish this, along with any other information you deem relevant, in the Message to CLA box during checkout.
Part Number: 37900 Dimensions: 0 3/4” x 0 1/2”
Material: brass
Weight: 0.1
| 37900 fits these 15 Charbroil models: |
| | | | |
Clamp-on brass gas valve for Charbroil.
- D-Value: 6 o'clock
- Stem diameter: 8mm
- Blank orifice included (with starter hole) or use original orifice.
Part Number: 3730C Material: brass
Weight: 0.3
| 3730C fits this one Charbroil model: |
| | | | |
Clamp-on valve for Charbroil Professional series. Orifice not included. Stem: 6mmx 1 3/4”. D-Value is 12 o'clock
Part Number: 3701C Dimensions: 4 1/4” x 1 7/16”
Weight: 0.5
| 3701C fits these 18 Charbroil models: |
| | | | |
Clamp-on brass gas valve with straight outlet. Includes orifice.
- D-Value: 12 o'clock
- Stem diameter: 6mm
- Stem length: 1 3/4”
Includes orifice with #72 starter hole. Must be drilled to proper drill size.
Part Number: 3700C Dimensions: 4 15/16” x 2 1/8”
Material: brass
Weight: 0.5
T manifold for twin valves with 3/8” male flare. Fits Charbroil late model grills with LP hoses crimped to the manifold.
Part Number: 34100
Dimensions: 2” x 1 5/16”
Material: brass
Weight: 0.3
Brass spud orifice with 11/32” x 32 thread size. Has #70 starter hole. Must be drilled to proper drill size.
If you would like us to drill the orifice(s) for you, there is a single $15 fee for this service, which will be added to the order when processed. Please tell us the number of burners in your grill and the total BTUs of your grill (less side burner and rotisserie burner, if any). BTU rating information can usually be found on the grill's CSA certification tag, located somewhere on the grill. Please furnish this, along with any other information you deem relevant, in the Message to CLA box during checkout.
Part Number: 33200
Dimensions: 0 7/16” x 0 7/16”
Material: brass
Weight: 0.01
Brass blunt-end hood orifice drilled to #64 starter hole. Fits valve 3701C, others. Must be drilled to proper drill size.
If you would like us to drill the orifice(s) for you, there is a single $15 fee for this service, which will be added to the order when processed. Please tell us the number of burners in your grill and the total BTUs of your grill (less side burner and rotisserie burner, if any). BTU rating information can usually be found on the grill's CSA certification tag, located somewhere on the grill. Please furnish this, along with any other information you deem relevant, in the Message to CLA box during checkout.
Part Number: 31700 Dimensions: 0 15/16” x 0 9/16”
Material: brass
Weight: 0.1
| 31700 fits these 18 Charbroil models: |
| | | | |
Small 7mm brass spud orifice. #72 starter hole. Must be drilled to proper drill size.
If you would like us to drill the orifice(s) for you, there is a single $15 fee for this service, which will be added to the order when processed. Please tell us the number of burners in your grill and the total BTUs of your grill (less side burner and rotisserie burner, if any). BTU rating information can usually be found on the grill's CSA certification tag, located somewhere on the grill. Please furnish this, along with any other information you deem relevant, in the Message to CLA box during checkout.
Part Number: 31500 Material: brass
Weight: 0.01
| 31500 fits this one Charbroil model: |
| | | | |
Brass orifice. 6mm x 3/4” cone shaped orifice with #64 drill size starter hole. For Electec and other clamp-on valves. Must be drilled to proper drill size.
If you would like us to drill the orifice(s) for you, there is a single $15 fee for this service, which will be added to the order when processed. Please tell us the number of burners in your grill and the total BTUs of your grill (less side burner and rotisserie burner, if any). BTU rating information can usually be found on the grill's CSA certification tag, located somewhere on the grill. Please furnish this, along with any other information you deem relevant, in the Message to CLA box during checkout.
Part Number: 31400
Dimensions: 0 3/4” x 0 5/16”
Material: brass
Weight: 0.01
Neoprene valve gasket for clamp-on gas control valves. 19mm.
Part Number: 00019 Dimensions: 0 1/2” x 0 1/4”
Material: neoprene
Weight: 0.01
| 00019 fits these 18 Charbroil models: |
| | | | |
