Blooma Igniter Components

Snap In Piezo Ignitor. Fits Weber Genesis Silver A,B,C and Newer Spirit E310 & E320.

For more information about ignition systems and components, please see article Ignition 101 in our help center.

Part Number: UP-9B
Weight: 0.2

UP-9B fits these 2 Blooma models:
Cairns G200 WG1402	Surnaco WG-H3303

Universal 3 outlet rotary spark generator. Includes knob.

For more information about ignition systems and components, please see article Ignition 101 in our help center.

Part Number: UP-8B
Weight: 0.3

Universal two outlet rotary spark generator. Includes knob and hardware.

For more information about ignition systems and components, please see article Ignition 101 in our help center.

Part Number: UP-6B
Weight: 0.3

Universal one outlet rotary spark generator. Includes knob and hardware.

For more information about ignition systems and components, please see article Ignition 101 in our help center.

Part Number: UP-5B
Weight: 0.12

Universal push-button igniter. Round male connector. Includes locking nut.

For more information about ignition systems and components, please see article Ignition 101 in our help center.

Part Number: UP-4B
Weight: 0.3

Push-button electronic igniter with four (4) spade connectors. Black cap. Uses one AAA battery (not included). Requires a 3/4” mounting hole.

For more information about ignition systems and components, please see article Ignition 101 in our help center.

Part Number: TS-IG4010
Weight: 0.2

TS-IG4010 fits these 3 Blooma models:
Bondi G450	Byron G450	G56201

Battery powered push button igniter.

• Has four (4) spade type male connectors.
• Uses 1 AAA battery (not supplied)
• Requires 3/4” or 13/16” mounting hole.

For more information about ignition systems and components, please see article Ignition 101 in our help center.

Part Number: IGEIB4-B
Weight: 0.3

IGEIB4-B fits these 3 Blooma models:
Bondi G450	Byron G450	G56201

DCS (9 Volt) 4-Prong Spark Generator

For more information about ignition systems and components, please see article Ignition 101 in our help center.

Part Number: IGEIB14-B
Weight: 0.40

IGEIB14-B fits these 2 Blooma models:
KORAB	Ultar EM-H4400SS

16” Universal Ignitor Wire

For more information about ignition systems and components, please see article Ignition 101 in our help center.

Part Number: IG-48B
Dimensions: 16
Weight: 0.05

IG-48B fits these 8 Blooma models:
Bondi G450 Byron G450	Cairns G200 WG1402 EM-84400SS	G56201 Surnaco WG-H3303	Ultar 4-burner WG1403

Universal extention wire, male spade end & female round end.

For more information about ignition systems and components, please see article Ignition 101 in our help center.

Part Number: IG-46B
Dimensions: 2 1/2
Weight: 0.10

46” Wire with female spade connectors and square plastic connectors.

For more information about ignition systems and components, please see article Ignition 101 in our help center.

Part Number: IG-30B
Dimensions: 46
Weight: 0.1

IG-30B fits these 8 Blooma models:
Bondi G450 Byron G450	Cairns G200 WG1402 EM-84400SS	G56201 Surnaco WG-H3303	Ultar 4-burner WG1403

Burner-mounted ceramic electrode, wire, and mounting bracket.

For more information about ignition systems and components, please see article Ignition 101 in our help center.

Part Number: IG-19B
Weight: 0.1

IG-19B fits these 14 Blooma models:
CG-4KFU G-2KFU G-2KFU-1B	G-2KFU-ORG G-3KFU G-3KFU-18	G-4KFU G2KFU-BLK Rockwell 200	Rockwell 210 Rockwell 300 Rockwell 310	Rockwell 400 Rockwell Hybrid

Universal collector box with electrode and wire. Fits most H burners, cast iron and stainless. Mounts to burner using venturi screws. Slotted construction allow universal adjustment of electrode position.

For more information about ignition systems and components, please see article Ignition 101 in our help center.

Part Number: IG-15B
Weight: 0.3

electronic push-button 4-spade igniter.

• Uses AAA battery (not included)
• Requires 3/4” mounting hole

For more information about ignition systems and components, please see article Ignition 101 in our help center.

Part Number: 10342-247
Weight: 0.5

10342-247 fits these 3 Blooma models:
Bondi G450	Byron G450	G56201

Igniter electrode assembly.

• Collector box
• Electrode with ceramic insulator
• 15” wire with female round connector

For more information about ignition systems and components, please see article Ignition 101 in our help center.

Part Number: 06120
Material: ceramic
Weight: 0.1

06120 fits these 6 Blooma models:
Dakota 2-burner Laguna 2-burner	WG-H2291 WG-H291	WG1602 WG1602-6A

Burner mounted electrode for use with 15591 and 15491 burners.

• 39” wire with female spade connector
• Includes adapter wire part 03198 for applications needing male spade connector on electrode.

For more information about ignition systems and components, please see article Ignition 101 in our help center.

Part Number: 04430
Material: ceramic
Weight: 0.1

04430 fits these 14 Blooma models:
CG-4KFU G-2KFU G-2KFU-1B	G-2KFU-ORG G-3KFU G-3KFU-18	G-4KFU G2KFU-BLK Rockwell 200	Rockwell 210 Rockwell 300 Rockwell 310	Rockwell 400 Rockwell Hybrid

Universal adapter wire with male round and female spade connectors.

For more information about ignition systems and components, please see article Ignition 101 in our help center.

Part Number: 03751
Weight: 0.05

Universal battery powered push button ignitor.

• 1.5 volt
• Has five (5) terminals (male spade connector)
• Uses a single AA battery (not included))
• 03610 and 03620 wires are commonly used with this igniter (not included)
• Requires 7/8” mounting hole
• Overall dimensions: 2” x 3 3/8” x 3”
• Some original igniters had an integrated ground wire. Use wire part# 03620 for this purpose.

For more information about ignition systems and components, please see article Ignition 101 in our help center.

Part Number: 03380
Dimensions: 3 5/16” x 2”
Weight: 0.7

Push-button ignitor switch.

For more information about ignition systems and components, please see article Ignition 101 in our help center.

Part Number: 03369
Dimensions: 0 3/4” x 0 3/4”
Weight: 0.1

03369 fits these 2 Blooma models:
KORAB	Ultar EM-H4400SS

Universal three-outlet battery powered push button ignitor.

• 1.5 volt
• Has three (3) terminals (male spade connector)
• Uses a single AA battery (not included)
• 03610 and 03620 wires are commonly used with this igniter (not included)
• Requires 7/8” mounting hole

For more information about ignition systems and components, please see article Ignition 101 in our help center.

Part Number: 03333
Dimensions: 2 9/16” x 2”
Weight: 0.5

Battery powered ignitor/spark generator for Surefire electronic ignition systems using remote button/trigger.

• 1.5 volt
• Has three (3) spark outlets (male spade connector)
• Has two (2) male spade connectors for trigger (button) part #03152 (sold separately)
• Uses a single AA battery (not included)
• Requires 7/8” mounting hole

NOTE: The battery cap is not a push button. The ignitor is fired by a remote button/switch.

For more information about ignition systems and components, please see article Ignition 101 in our help center.

Part Number: 03332
Dimensions: 2 5/8” x 2 5/8”
Weight: 0.3

03332 fits these 5 Blooma models:
Bondi G300	Byron G350	Camden G350	G46301	G46303

Universal 2 3/4” adaptor wire with a round female end and a male spade end that has a protective cover.

For more information about ignition systems and components, please see article Ignition 101 in our help center.

Part Number: 03199C
Weight: 0.05

Universal 5 1/2” jumper wire with female spade ends to close off unused pair of outlets in battery-powered spark generator, or use as an adaptor wire.
NOTICE: EACH END HAS A PLASTIC PROTECTOR CAP.

For more information about ignition systems and components, please see article Ignition 101 in our help center.

Part Number: 03197
Weight: 0.05

round trigger switch for AA and AAA spark generators; use original wires

For more information about ignition systems and components, please see article Ignition 101 in our help center.

Part Number: 03153
Dimensions: 17 3/4” x 1”
Weight: 0.1

03153 fits these 8 Blooma models:
Bondi G300 Bondi G450	Byron G350 Byron G450	Camden G350 G46301	G46303 G56201

Ignition module switch for spark generators that accept wired remote (button) trigger switches. Fits our spark generator part numbers 03322, 03332, 03344, 03352, 03356, 03387 and 03388.
Includes:

• Push-button ignition module switch with two male spade connectors on back
• Two 20” wires with female spade connectors
• One plastic mounting nut

For more information about ignition systems and components, please see article Ignition 101 in our help center.

Part Number: 03152
Dimensions: 17 3/4” x 1”
Weight: 0.1

03152 fits these 5 Blooma models:
Bondi G300	Byron G350	Camden G350	G46301	G46303

Push-Button self-grounding piezo spark generator; requiers 3/4” mounting hole. Primary connector is a round male connector, so connecting wire needs to be female round connector. If needed, see part# 03199C for a short adapter wire that converts flat female spade connectors to female round. Secondary connector is a flat male spade connector used to conduct spark to a secondary electrode, such as a side burner, or used as a ground in some applications. See ground wire part# 03620. For more information, see our article Ignition 101.

Part Number: 03120
Weight: 0.1

03120 fits these 2 Blooma models:
Cairns G200 WG1402	Surnaco WG-H3303