Broilmaster Heat Tents

Burner hood (heat plate). Sold individuallly, Use one per main burner.

Part Number: SSG022
Dimension Front-to-Back: 14 3/4”
Dimension Side-to-Side: 2 3/4”
Material: stainless steel
Weight: 0.8

SSG022 fits this one Broilmaster model:
SSG-36-1

Stainless steel Flame Tamer , fits SBB2804

Part Number: SBB00102
Dimension Front-to-Back: 16 15/16”
Dimension Side-to-Side: 5 1/2”
Material: stainless steel
Weight: 0.95

SBB00102 fits these 3 Broilmaster models:
SBB2804-1	SBG2501	SBG2801

Heat Shield, Fits SBG2500

Part Number: SBB00089
Weight: 1.0

SBB00089 fits this one Broilmaster model:
SBG2500

Flame Tamer. Now stainless steel, original was porcelain steel as shown in photo. Fits SBG2500.

Part Number: SBB00052
Dimension Front-to-Back: 18 5/8”
Dimension Side-to-Side: 5 1/2”
Material: stainless steel
Weight: 1.45

SBB00052 fits this one Broilmaster model:
SBG2500

Flame tamer, sold individually, two (2) required.

Part Number: SB1419014130
Dimension Front-to-Back: 14 3/4”
Dimension Side-to-Side: 12 3/4”
Material: stainless steel
Weight: 0.6

SB1419014130 fits these 3 Broilmaster models:
SBG701-1	SBH700-1	SBH701-1

WIND SHIELD BACK BURNER

Part Number: SB1419013309
Weight: 1.0

SB1419013309 fits these 2 Broilmaster models:
SBG701-1	SBH701-1

HEAT SHIELD BACK BURNER

Part Number: SB1419013308
Weight: 1.0

SB1419013308 fits these 2 Broilmaster models:
SBG701-1	SBH701-1

Heat Tent, sold individually, use one per burner.

Part Number: SB1418011003
Dimension Front-to-Back: 14 3/4”
Dimension Side-to-Side: 4 1/8”
Material: stainless steel
Weight: 0.6

SB1418011003 fits these 2 Broilmaster models:
SBG300-1	SBH300-1

SB1416064130 HEAT TENT. Fits SBG200 and SBH200 grills.

Part Number: SB1416064130
Weight: 1.0

SB1416064130 fits this one Broilmaster model:
SBG200

SB141601411 FLame Tamer. Fits SBG200 and SBH200.

Part Number: SB141601411
Weight: 1.0

SB141601411 fits these 2 Broilmaster models:
SBG200	SBH200-1

Flare Buster Flat Ceramic Pads; consist of ten pieces, three of which are different size pieces. For P4, H4, D4. Requires B067449 Rack if replacing flavor screen.

Part Number: DPA117
Material: ceramic
Weight: 4.6

DPA117 fits these 25 Broilmaster models:
D4 D4 (1990s) D4BL D4BL-1 D4BL-1 (2003)	H4X H4XN P4 P4 (1990s) P4BL (2002)	P4BL (2003) P4BL-1 P4BLN-1 P4GY (2002) P4GY (2003)	P4GY-1 P4GYN-1 P4HG (2002) P4HG (2003) P4HG-1	P4HGN-1 P4X P4XF P4XFN P4XN

Flare Busters Flat Ceramic Pads. For P3, T3, D3, H3. Package of 12. Each tile measures 7 1/4 ” x 3 1/2”. Used with B101061 rack.

Part Number: DPA116
Dimension Front-to-Back: 7 1/4”
Dimension Side-to-Side: 3 1/2”
Material: ceramic
Weight: 4.5

DPA116 fits these 62 Broilmaster models:
D3 D3 (1990s) D3BL (2003) D3BL-1 D3BL-1 (2003) D3NWO (1990s) D4	D4NWO (1990s) H3X H3XN P3 P3 (1990s) P3BL (2002) P3BL (2003)	P3BL-1 P3BLN-1 P3FBL (2003) P3FBL-1 P3FBLN-1 P3FGY (2003) P3FGY-1	P3FGYN-1 P3GY (2002) P3GY (2003) P3GY-1 P3GYN-1 P3HG (2002) P3HG (2003)	P3HG-1 P3HGN-1 P3S-1 P3SN-1 P3SS P3SX 28 more models...

Stainless steel Flame Tamer assembly.

• Replaces Broilmaster part# SB142101-2200
• Assembly required (see photos)
• Sold individually.
• Shipped with protective peel-off coating, remove before use.M
• Must be assembled as shown in photos. See location of mounting holes.
• Made in USA.

..

NOTE: Sometimes shipped with vinyl peel-off coating. Remove before use.

Part Number: CLA-TS0088
Dimension Front-to-Back: 14 5/8”
Dimension Side-to-Side: 6 3/4”
Material: stainless steel
Weight: 1.3

CLA-TS0088 fits these 3 Broilmaster models:
SBG600-1	SBG601-1	SBH600-1

Flare Buster Flat Ceramic Flavor Enhancer Pad. Sold individually.

Part Number: B101407
Dimension Front-to-Back: 7 1/4”
Dimension Side-to-Side: 3 1/2”
Weight: .35

B101407 fits these 10 Broilmaster models:
P3X P3XF	P3XFN P3XN	P4X P4XF	P4XFN P4XN	SBG800-1 SBG800-2

Burner Shield for T3

Part Number: B101154
Weight: 1.0

B101154 fits these 20 Broilmaster models:
R3B-1 R3BN-1 T3 T3-2	T3C T3C-2 T3CA-2 T3CAN-2	T3CF T3CF-2 T3CFN T3CFN-2	T3CN T3CN-2 T3CW-2 T3CWN-2	T3N T3N-2 T3W-2 T3WN-2