Charbroil Valves, Orifices, and Manifolds

Dual LP gas valve assembly.

Part Number: VLV-33
Material: Brass
Weight: 0.7

VLV-33 fits these 140 Charbroil models:
GG5010 GG5020-1 GG5020 GG5021-1 GG5021 GG5022 GG5023-1	GG5023 GG5024 GG5025-1 GG5025 GG5029-1 GG5121 GG6020-1	GG6020 GG6021-1 GG6021 GG6022 GG6023-1 GG6023 GG6025-1	GG6025 GG6120 GG6122 GG6124 GG6126 GG7024 GG7030-1	GG7030 GG7031-1 GG7031 GG7032-1 GG7032 GG7033-1 106 more models...

Dual brass LP valve assembly. Includes left and right control valves and valve manifold. For grills requiring 45 degree angle valves including many Charbroil grills with up-front controls.

Part Number: VLV-29
Weight: 1.1

In post control valve without manifold or orifice, with 1/8” NPT pipe thread for hood orifice. Fits Charbroil, Falcon, and most twin in post control grills with hood orifice. Orifice not included. Use original or our part #37900.

Part Number: 38800
Dimensions: 3 1/8” x 1 1/4”
Material: brass
Weight: 0.3

38800 fits these 15 Charbroil models:
GG1206 GG1207 GG1209	GG1222 GG1412C GG606	GG622-CIG GG622 GG681	GG681OT GG681VS GG683	GG781 GG906 GG912

Valve with 45° angled orifice snout built to accept 11/32 x 32 threaded spud type orifice (not provided); uses orifice # 33200. Mounts to the right side of original up-front control manifold assembly. Valve stem is 8mm, and needs a knob with a 9 D-value. Can use with universal knobs 00110 or 00310 or 01800 depending on needed knob stem length.

Part Number: 38600
Dimensions: 3 9/16” x 1 1/4”
Material: brass
Weight: 0.4

3” valve shaft extender.

Part Number: 38000
Dimensions: 3 1/16” x 0 1/2”
Material: brass
Weight: 0.1

Brass hood orifice with #72 starter hole and 1/8” x 22 threading for use with valves 37700, 37800, and 38800. Must be drilled to proper drill size.

If you would like us to drill the orifice(s) for you, there is a single $15 fee for this service, which will be added to the order when processed. Please tell us the number of burners in your grill and the total BTUs of your grill (less side burner and rotisserie burner, if any). BTU rating information can usually be found on the grill's CSA certification tag, located somewhere on the grill. Please furnish this, along with any other information you deem relevant, in the Message to CLA box during checkout.

Part Number: 37900
Dimensions: 0 3/4” x 0 1/2”
Material: brass
Weight: 0.1

37900 fits these 15 Charbroil models:
GG1206 GG1207 GG1209	GG1222 GG1412C GG606	GG622-CIG GG622 GG681	GG681OT GG681VS GG683	GG781 GG906 GG912

Clamp-on brass gas valve for Charbroil.

• D-Value: 6 o'clock
• Stem diameter: 8mm
• Blank orifice included (with starter hole) or use original orifice.

Part Number: 3730C
Material: brass
Weight: 0.3

3730C fits this one Charbroil model:
463440109

Clamp-on valve for Charbroil Professional series. Orifice not included. Stem: 6mmx 1 3/4”. D-Value is 12 o'clock

Part Number: 3701C
Dimensions: 4 1/4” x 1 7/16”
Weight: 0.5

3701C fits these 18 Charbroil models:
4632210 4632215 463221503 4632220	4632235 4632236 4632240 4632241	463231503 4632315031 463231603 463232103	463233503 463233603 463234603 463234703	466231103 466231203

Clamp-on brass gas valve with straight outlet. Includes orifice.

• D-Value: 12 o'clock
• Stem diameter: 6mm
• Stem length: 1 3/4”

Includes orifice with #72 starter hole. Must be drilled to proper drill size.

Part Number: 3700C
Dimensions: 4 15/16” x 2 1/8”
Material: brass
Weight: 0.5

Right valve for manifold 35950. Fits Charbroil U-burner models: 7000, 8000, and 9000 series.

Part Number: 35970
Dimensions: 2 15/16” x 1 5/16”
Material: brass
Weight: 0.5

35970 fits these 18 Charbroil models:
4658660 4658663 4658667 4659572	4659663 4668569 4857565 4858575	4858641 4859575 GG7435 GG7475	GG7476 GG8475 GG8476 GG8564	GG9475 GG9476

Left valve for manifold 35950. Fits Charbroil U-burner models: 7000, 8000, and 9000 series.

Part Number: 35960
Dimensions: 2 15/16” x 1 5/16”
Material: brass
Weight: 0.5

35960 fits these 18 Charbroil models:
4658660 4658663 4658667 4659572	4659663 4668569 4857565 4858575	4858641 4859575 GG7435 GG7475	GG7476 GG8475 GG8476 GG8564	GG9475 GG9476

T manifold for twin valves with 3/8” male flare. Fits Charbroil late model grills with LP hoses crimped to the manifold.

Part Number: 34100
Dimensions: 2” x 1 5/16”
Material: brass
Weight: 0.3

Brass spud orifice with 11/32” x 32 thread size. Has #70 starter hole. Must be drilled to proper drill size.

If you would like us to drill the orifice(s) for you, there is a single $15 fee for this service, which will be added to the order when processed. Please tell us the number of burners in your grill and the total BTUs of your grill (less side burner and rotisserie burner, if any). BTU rating information can usually be found on the grill's CSA certification tag, located somewhere on the grill. Please furnish this, along with any other information you deem relevant, in the Message to CLA box during checkout.

Part Number: 33200
Dimensions: 0 7/16” x 0 7/16”
Material: brass
Weight: 0.01

Brass blunt-end hood orifice drilled to #64 starter hole. Fits valve 3701C, others. Must be drilled to proper drill size.

If you would like us to drill the orifice(s) for you, there is a single $15 fee for this service, which will be added to the order when processed. Please tell us the number of burners in your grill and the total BTUs of your grill (less side burner and rotisserie burner, if any). BTU rating information can usually be found on the grill's CSA certification tag, located somewhere on the grill. Please furnish this, along with any other information you deem relevant, in the Message to CLA box during checkout.

Part Number: 31700
Dimensions: 0 15/16” x 0 9/16”
Material: brass
Weight: 0.1

31700 fits these 17 Charbroil models:
4632210 4632215 463221503 4632220	4632235 4632236 4632240 4632241	463231503 4632315031 463231603 463233503	463233603 463234603 463234703 466231103	466231203

Small 7mm brass spud orifice. #72 starter hole. Must be drilled to proper drill size.

If you would like us to drill the orifice(s) for you, there is a single $15 fee for this service, which will be added to the order when processed. Please tell us the number of burners in your grill and the total BTUs of your grill (less side burner and rotisserie burner, if any). BTU rating information can usually be found on the grill's CSA certification tag, located somewhere on the grill. Please furnish this, along with any other information you deem relevant, in the Message to CLA box during checkout.

Part Number: 31500
Material: brass
Weight: 0.01

31500 fits this one Charbroil model:
463440109

Brass orifice. 6mm x 3/4” cone shaped orifice with #64 drill size starter hole. For Electec and other clamp-on valves. Must be drilled to proper drill size.

If you would like us to drill the orifice(s) for you, there is a single $15 fee for this service, which will be added to the order when processed. Please tell us the number of burners in your grill and the total BTUs of your grill (less side burner and rotisserie burner, if any). BTU rating information can usually be found on the grill's CSA certification tag, located somewhere on the grill. Please furnish this, along with any other information you deem relevant, in the Message to CLA box during checkout.

Part Number: 31400
Dimensions: 0 3/4” x 0 5/16”
Material: brass
Weight: 0.01

Neoprene valve gasket for clamp-on gas control valves. 19mm.

Part Number: 00019
Dimensions: 0 1/2” x 0 1/4”
Material: neoprene
Weight: 0.01

00019 fits these 18 Charbroil models:
4632210 4632215 463221503 4632220	4632235 4632236 4632240 4632241	463231503 4632315031 463231603 463232103	463233503 463233603 463234603 463234703	466231103 466231203