Falcon Valves, Orifices, and Manifolds

Dual brass LP valve assembly. Includes left and right control valves and valve manifold. Fits Arkla up-front control grills and others requiring 45 degree angle valves.

• For use with LP gas
• Includes two orifices drilled to #57 drill size
• Includes pre-assembled 45 degree angle fitting, not shown in photo

Part Number: VLV-28
Material: brass
Weight: 1.1

VLV-28 fits these 47 Falcon models:
551990 551996 552890 552990 553890 553920 GF 430	GF304-4 GF430-2 GF430-217-SB GF430-286-EB GF430-286-EI GF430-292-EB GF430-292-EL	GF430-329-EA GF430-329-EI GF430-5 GF430-6 GF430-EB GF430-EI GF430-EL	GF430-SB GF430-SI GF430-SL GF540-286-EB GF540-286-EL GF540-286-SB 20 more models...

Dual valve for LP gas

Part Number: VLV-25
Material: Brass
Weight: 0.4

VLV-25 fits these 5 Falcon models:
2000 with 7in venturi 4000 with 7in venturi	5000 with 7in venturi Mark IV 7in single venturi	Mark V 7in single venturi

Single valve for LP gas

Part Number: VLV-24
Material: Brass
Weight: 0.4

VLV-24 fits these 5 Falcon models:
2000 with 7in venturi 4000 with 7in venturi	5000 with 7in venturi Mark IV 7in single venturi	Mark V 7in single venturi

In post control valve without manifold or orifice, with 1/8” NPT pipe thread for hood orifice. Fits Charbroil, Falcon, and most twin in post control grills with hood orifice. Orifice not included. Use original or our part #37900.

Part Number: 38800
Dimensions: 3 1/8” x 1 1/4”
Material: brass
Weight: 0.3

38800 fits these 4 Falcon models:
4200	5200	Mark IV 7in twin venturi	Mark V 7in twin venturi

Valve with 45° angled orifice snout built to accept 11/32 x 32 threaded spud type orifice (not provided); uses orifice # 33200. Mounts to the right side of original up-front control manifold assembly. Valve stem is 8mm, and needs a knob with a 9 D-value. Can use with universal knobs 00110 or 00310 or 01800 depending on needed knob stem length.

Part Number: 38600
Dimensions: 3 9/16” x 1 1/4”
Material: brass
Weight: 0.4

Brass hood orifice with #72 starter hole and 1/8” x 22 threading for use with valves 37700, 37800, and 38800. Must be drilled to proper drill size.

If you would like us to drill the orifice(s) for you, there is a single $15 fee for this service, which will be added to the order when processed. Please tell us the number of burners in your grill and the total BTUs of your grill (less side burner and rotisserie burner, if any). BTU rating information can usually be found on the grill's CSA certification tag, located somewhere on the grill. Please furnish this, along with any other information you deem relevant, in the Message to CLA box during checkout.

Part Number: 37900
Dimensions: 0 3/4” x 0 1/2”
Material: brass
Weight: 0.1

37900 fits these 4 Falcon models:
4200	5200	Mark IV 7in twin venturi	Mark V 7in twin venturi

Right valve of assembly 37000. Replaces right side of Sunbeam OEM part #3512-0100. Orifice not included. Use original or 11/32” x 32 replacement. Also fits pre-1995 Fiesta models. D-Value is 6 o'clock

Part Number: 37400
Material: brass
Weight: 0.3

37400 fits these 4 Falcon models:
3049F	3049F6	4049F6	W4049

Left valve of assembly 37000. Replaces left side of Sunbeam OEM part #3512-0100. Orifice not included. Use original or 11/32” x 32 replacement. Also fits pre-1995 Fiesta models. D-Value is 9 o'clock

Part Number: 37300
Material: brass
Weight: 0.3

37300 fits these 4 Falcon models:
3049F	3049F6	4049F6	W4049

Mounting bracket for use with valves 36100 and 36200. Can be used on many post-mounted grills.

Part Number: 36162
Dimensions: 2 15/16” x 1 1/2”
Material: painted steel
Weight: 0.2

36162 fits these 5 Falcon models:
2000 with 7in venturi 4000 with 7in venturi	5000 with 7in venturi Mark IV 7in single venturi	Mark V 7in single venturi

Brass spud orifice with 11/32” x 32 thread size. Has #70 starter hole. Must be drilled to proper drill size.

If you would like us to drill the orifice(s) for you, there is a single $15 fee for this service, which will be added to the order when processed. Please tell us the number of burners in your grill and the total BTUs of your grill (less side burner and rotisserie burner, if any). BTU rating information can usually be found on the grill's CSA certification tag, located somewhere on the grill. Please furnish this, along with any other information you deem relevant, in the Message to CLA box during checkout.

Part Number: 33200
Dimensions: 0 7/16” x 0 7/16”
Material: brass
Weight: 0.01

Brass spud orifice with 5/16” x 32 thread size. Has #70 starter hole. Must be drilled to proper drill size.

If you would like us to drill the orifice(s) for you, there is a single $15 fee for this service, which will be added to the order when processed. Please tell us the number of burners in your grill and the total BTUs of your grill (less side burner and rotisserie burner, if any). BTU rating information can usually be found on the grill's CSA certification tag, located somewhere on the grill. Please furnish this, along with any other information you deem relevant, in the Message to CLA box during checkout.

Part Number: 31600
Dimensions: 0 3/8” x 0 7/16”
Material: brass
Weight: 0.01

31600 fits these 47 Falcon models:
551990 551996 552890 552990 553890 553920 GF 430	GF304-4 GF430-2 GF430-217-SB GF430-286-EB GF430-286-EI GF430-292-EB GF430-292-EL	GF430-329-EA GF430-329-EI GF430-5 GF430-6 GF430-EB GF430-EI GF430-EL	GF430-SB GF430-SI GF430-SL GF540-286-EB GF540-286-EL GF540-286-SB 20 more models...