Grand Hall HGI08ALP Grill Parts

Highest quality replacement parts for your Grand Hall HGI08ALP - Free USA shipping $49 or more* - No Sales Tax*

Grand Hall HGI08ALP owners manual and diagrams

Diagrams & owners manual not available for grill model# HGI08ALP. If you have a manual you're willing to share, please click here to send us an email with the attached manual. Thank You!

Replacement grill parts for Grand Hall model: HGI08ALP

This page shows all of the parts we know fit model Grand Hall HGI08ALP. If you can't find the part you need below, click on the appropriate category button on the right side of the page. For example, if your looking for an ignitor, or other ignition components, and there are none here, click the ignition button to see what we have for Grand Hall grills. Knowing the dimensions of your existing part will help you find the right part.

To get the correct Grand Hall HGI08ALP BBQ parts

You should measure your existing parts and compare them to what we show here. This is best done with them removed from the grill.
Verify your Grand Hall model number by checking the CSA appliance tag on your grill to make sure you have the correct model number. Do not rely solely on the owners manual as these are frequently mixed up at retail stores when the grills are assembled. You'd be surprised at how many folks have the wrong owners manual.

HGI08ALP Burners

P02008032A / SCTB5

Click for photos

Sam's Club burner W/ Lip like OEM for Grand Hall model HGI08ALP.

Part Number: SCTB5 (Replaces Grand Hall P02008032A)
Dimensions: 14 3/4
Material: stainless steel
Weight: 0.7

==> All Grand Hall Burners.

HGI08ALP Cooking Grids

P01604031B / 506S3

Click for photos

Stainless steel cooking grid set for Grand Hall model HGI08ALP.

5/16” diameter stainless rods
304 stainless steel

Part Number: 506S3 (Replaces Grand Hall P01604031B)
Dimension Front-to-Back: 19 1/8”
Dimension Side-to-Side: 32 3/8”
Material: stainless steel
Weight: 15.1

==> All Grand Hall Cooking Grids.

HGI08ALP Heat Plates

P017080074 / CLA-TS0314

Click for photos

Stainless steel Savor Plate, also known as Flamer Tamer and Heat Plate for Grand Hall model HGI08ALP. Sold individually. Made in USA.

NOTE: Sometimes shipped with vinyl peel-off coating. Remove before use.

Part Number: CLA-TS0314 (Replaces Grand Hall P017080074)
Dimension Front-to-Back: 16 3/8”
Dimension Side-to-Side: 4 1/16”
Material: stainless steel
Weight: .75

P017080074 / SCHP4

Click for photos

Stainless steel heat plate; also referred to as a flame tamer and savor plate for Grand Hall model HGI08ALP.

Part Number: SCHP4 (Replaces Grand Hall P017080074)
Dimension Front-to-Back: 16 3/8”
Dimension Side-to-Side: 3 13/16”
Material: stainless steel
Weight: 1.0

==> All Grand Hall Heat Plates.

HGI08ALP Igniter Components

P02609010B / IG-17B

Click for photos

Stainless steel collector box and ceramic electrode with round connector. Includes mounting nuts and washer.

For more information about ignition systems and components, please see article Ignition 101 in our help center.

Part Number: IG-17B (Replaces Grand Hall P02609010B)
Weight: 0.11

P02502265C / IGEIB6-B

Click for photos

Battery powered push button igniter.

Has six (6) spade type male connectors.
Uses 1 AA battery (not supplied)
Requires 7/8” mounting hole.

For more information about ignition systems and components, please see article Ignition 101 in our help center.

Part Number: IGEIB6-B (Replaces Grand Hall P02502265C)
Weight: 0.3

IG-30B

Click for photos

46” Wire with female spade connectors and square plastic connectors.

For more information about ignition systems and components, please see article Ignition 101 in our help center.

Part Number: IG-30B
Dimensions: 46
Weight: 0.1

10342-T14

Click for photos

21” wire for side burner or other applications. One female spade connector, one female round connector.

For more information about ignition systems and components, please see article Ignition 101 in our help center.

Part Number: 10342-T14
Dimensions: 21
Weight: 0.05

IG-7B

Click for photos

20” igniter wire with female spade and round connector.

For more information about ignition systems and components, please see article Ignition 101 in our help center.

Part Number: IG-7B
Weight: 0.02

IG-48B

Click for photos

16” Universal Ignitor Wire

For more information about ignition systems and components, please see article Ignition 101 in our help center.

Part Number: IG-48B
Dimensions: 16
Weight: 0.05

IG-20B

Click for photos

Burner-mounted ceramic igniter electrode with mounting bracket and hardware.

For more information about ignition systems and components, please see article Ignition 101 in our help center.

Part Number: IG-20B
Weight: 0.05

==> All Grand Hall Igniter Components.

HGI08ALP Accessories

40269

Click for photos

20” Professional Extra Long Tong.
20” Stainless steel tong with red soft grip rubber inserts. Grip your food on the grill with ease. Manual lock saves on storage space.

Part Number: 40269
Material: stainless steel
Weight: 0.14

==> All HGI08ALP Accessories.

BBQ Part Categories

Grand Hall grill HGI08ALP - Sunday, Jan 26 2025

Return to Grand Hall grill parts main page

More Grand Hall grill models we have parts for

SS60884LP | SS60884NG | SS62884LP | SS62884NG | SS64 | SS64-B | SS64-B-NG | SS64-LP | SS64-NG | SS64LP | SS64NG | SS706 | SS706-108 | SS72-B | SS72-LP | SS72-NG | SS72LP | SS72NG | SS73 | STS2611ALP | STS2611ANG | STS2611BLP | STS2611BNG | STS26ANG | STS26BNG | STS3211ALP | STS3211BLP | STS3211BNG | STS32ANG | STS32BNG | TG08ALP | TG08BLP | TH09ALP | XI08ALP | XI08ANG | XS08ALP | XS08ANG | Y0005XC-1 | Y0005XC-2 | Y0101XC | Y0202XC | Y0202XC-LP | Y0202XC-NG | Y0655 | Y0656 | Y0660 | Y0660-1 | Y0660LP | Y0660LP-2 | Y0660NG | Complete list of Grand Hall grill models...

*Orders for Grand Hall grill model HGI08ALP $49 and over ship free to the lower 48 states.
See shipping policy below for more info.

Home | About Us | Contact Us | Privacy Policy | Shipping Policy | Return Policy
January 26, 2025