Jenn-Air JA580 Grill Parts

Commercial premium grade stainless steel burner for Jenn-Air model JA580.


Part Number: VTB1 (Replaces Jenn-Air 50000835)
Dimensions: 17
Material: stainless steel
Weight: 1.0

Burner mounting plate for Jenn-Air model JA580. This part is used to reinforce the front grill housing so the burner can be mounted to the grill. In some cases, the grill housing has rusted or corroded such that the burner cannot be properly mounted to the front of the grill.

• Sold individually, number required varies. Use one per burner.
• Includes mounting bolt and nut
• Includes extra holes for mounting to grill, if necessary.
• Comes with complete installation instructions.

For models:

• CF9080/85/86
• VCS300/3500/35BI/4000/4005/5000/5005/5010/50BI
• VCS3507/4007/5007/3507BI/5007BI

Made in USA

Part Number: CLA-MS0227
Dimensions: 3 3/4” x 4 15/16”
Material: stainless steel
Weight: 0.11

Burner mounting plate for Jenn-Air model JA580. This part is used to reinforce the front grill housing so the burner can be mounted to the grill. In some cases, the grill housing has rusted or corroded such that the burner cannot be properly mounted to the front of the grill.

• Premium grade stainless steel
• Includes gasket and mounting screw
• Comes with complete installation instructions
• Sold individually.

For models:

• CF9080/85/86
• VCS300/3500/35BI/4000/4005/5000/5005/5010/50BI
• VCS3507/4007/5007/3507BI/5007BI

Part Number: 03501
Dimensions: 3 3/4” x 4”
Material: stainless steel
Weight: 0.16

Cast iron cooking grid for Jenn-Air model JA580. Porcelain treated, matte finish. Sold individually, number required varies by grill model.

Part Number: CG-59P-CI (Replaces Jenn-Air 50001027)
Dimension Front-to-Back: 16 3/8”
Dimension Side-to-Side: 9 1/4”
Material: cast iron
Weight: 5.45

Stainless steel Flame Tamer for Jenn-Air model JA580. Sold individually, number required varies. Made in USA.

NOTE: Sometimes shipped with vinyl peel-off coating. Remove before use.

Part Number: CLA-TS0016 (Replaces Jenn-Air 50000877)
Dimension Front-to-Back: 14 1/2”
Dimension Side-to-Side: 7 1/4”
Material: stainless steel
Weight: 1.3

SET OF THREE/3 PACK Stainless steel Flame Tamer for Jenn-Air model JA580. Sold individually, number required varies. Made in USA.

NOTE: Sometimes shipped with vinyl peel-off coating. Remove before use.

Part Number: CLA-TS0016-X3
Dimension Front-to-Back: 14 1/2”
Dimension Side-to-Side: 7 1/4”
Material: stainless steel
Weight: 3.6

Battery powered push button igniter.

• Has six (6) spade type male connectors.
• Uses 1 AA battery (not supplied)
• Requires 7/8” mounting hole.

For more information about ignition systems and components, please see article Ignition 101 in our help center.

Part Number: IGEIB6-B (Replaces Jenn-Air 50000808)
Weight: 0.3

Burner-mounted ceramic igniter electrode with mounting bracket and hardware.

For more information about ignition systems and components, please see article Ignition 101 in our help center.

Part Number: IG-20B (Replaces Jenn-Air 50000431)
Weight: 0.05

46” Wire with female spade connectors and square plastic connectors.

For more information about ignition systems and components, please see article Ignition 101 in our help center.

Part Number: IG-30B
Dimensions: 46
Weight: 0.1

20” igniter wire with two (2) female spade connectors.

For more information about ignition systems and components, please see article Ignition 101 in our help center.

Part Number: IG-18B
Weight: 0.03

16” Universal Ignitor Wire

For more information about ignition systems and components, please see article Ignition 101 in our help center.

Part Number: IG-48B
Dimensions: 16
Weight: 0.05

12” long wood handle brass bristle grid brush with scraper and leather hang strap.

Part Number: WB-1
Dimensions: 12
Weight: 0.4