Master Forge Knobs and Handles

Universal hardwood handle. Fits many grills. Adjusts to hole spacing up to 23”.

Part Number: WH-3B
Dimensions: 24 1/16
Material: Wood
Weight: 0.7

Universal wood handle kit, 13” between screw centers

Part Number: WH-1B
Material: Polyurethane Finish
Weight: 0.40

KNOB VALVE LARGE

Part Number: SP11-7
Weight: 0.1

SP11-7 fits these 2 Master Forge models:
24025MSF	30030MSF

Universal durable black phenolic lid handle with threaded brass insert. (1/4” x 20 thread). Includes mounting bolt and lockwasher. Made for Ducane but makes a great universal lid handle that can be used on almost any grill.

Part Number: PH-2B
Dimensions: 3 1/2
Material: 6.59
Weight: .3

Universal gas appliance knob

Part Number: K-6B
Dimensions: 2
Weight: 0.1

Universal knobs, fits most BBQ valves, moveable dial face. PACK OF TWO KNOBS.

Part Number: K-10B
Dimensions: 2
Weight: 0.10

Universal stainless steel lid handle. Adjusts from 21” hole centers, down to 10”. Includes mounting hardware. Made in USA.

NOTE: Sometimes shipped with vinyl peel-off coating. Remove before use.

Part Number: CLA-MS0055
Dimensions: 23 5/8
Material: stainless steel
Weight: 1.0

Universal control knobs, set of two knobs, includes eight (8) shaft inserts to accomodate valve stem diameters of approximately 5/6” and 1/4”.

• Off position D-Value: 12 or 6 or 3 or 9 o'clock
• Knob diameter: 2 3/16”
• Insert socket diameters: 8.25mm (.32”) and 6.10mm (.24”)
• Knob shaft: Flat or 1”

Part Number: 25960
Weight: 0.20

BEZEL - TERMOMETER GAUGE

Part Number: 24996-10
Weight: 0.1

24996-10 fits these 2 Master Forge models:
288999	678489

HANDLE RING - MASTER FORGE

Part Number: 24009-934
Weight: 1.0

24009-934 fits this one Master Forge model:
288999

HANDLE LID

Part Number: 24006-134
Weight: 1.0

24006-134 fits this one Master Forge model:
288999

silver control knob.
There has been some confusion regarding the knob part numbers caused by revisions by the manufacturer. Basically, for the models whose owners manual shows part# 22002-966 or 22002-968, pick 22002-96 if you need a silver knob; pick 22002-966 if you need a black knob.

• Off position D-Value: 6 o'clock or 12 o'clock (no on/off mark)
• Knob diameter: 2 1/4”
• Socket diameter: 8mm
• Knob shaft: 1/2 inch

Part Number: 22002-96
Weight: 0.1

large control knob.

• Off position D-Value: 6 o'clock
• Knob diameter: 2 1/4”
• Socket diameter: 5/16”
• Knob shaft: 1/2”

Part Number: 22001-768
Weight: 0.2

22001-768 fits this one Master Forge model:
678489

small control knob.

• Off position D-Value: 6 o'clock
• Knob diameter: 1 7/8”
• Socket diameter: 5/16”
• Knob shaft: 1/2”

Part Number: 22001-668
Weight: 0.1

22001-668 fits this one Master Forge model:
678489

Universal 2 5/16” knob.

• Selectable D-Value
• Selectable socket diameter - 6mm or 8mm.
• Selectable shaft length - flush, 1/4”, or 1 5/8”. Shafts can also be trimmed to desired length.
• Includes 6 shaft inserts and set screw.
• Fits any grill with inside bezel diameter greater than 2 5/16” (the knob diameter).

Part Number: 02342
Dimensions: 2 5/16” x 2 5/16”
Material: plastic
Weight: 0.20

Universal black control knob. Counter-clockwise bezel.

• Off position D-Value: Selectable
• Knob diameter: 2 1/16”
• Socket diameter: 8mm
• Knob shaft: None

Part Number: 01800
Dimensions: 2 1/16” x 2 1/16”
Material: plastic
Weight: 0.05