MHP TJK Grill Parts

Stainless steel twin H burner and venturi assembly for MHP model TJK. Includes:

• One (1) twin SS H burner.
• Two (2) SS twist lock venturi.
• Built-in spider guards.
• Sold as assembly only, burner and venturi not available seperately.

Part Number: GG-DLB13TL
Dimensions: 19 1/2” x 8”
Weight: 3.0

SS twin venturi. For use with GG-DLB and HH-DSB H burners. Includes gaskets and hardware, and spider guards. Fits JNR, WNK, and TJK grills.

Part Number: GG-DV13
Material: stainless steel
Weight: 1.0

Heavy-duty stainless steel cooking grid for GJK, WNK, and TJK series grills for MHP model TJK.

• High grade stainless
• 5/16” solid stainless rods
• Sold individually.

Part Number: GG-SS-GRID
Dimension Front-to-Back: 15 3/4”
Dimension Side-to-Side: 12”
Material: stainless steel
Weight: 6.0

SearMagic Cooking Grid for models THRG, TRG, TJK, WNK, WHRG, WRG, W3G, and T3G for MHP model TJK.

• High Performance, Rust-Free Anodized Aluminum Cooking Grids.
• Sold individually, number required varies

This unique cooking grid heats up faster and cooks all foods at a uniform temperature. Use the wide-ribbed side for grilling steaks, chops, burgers and ribs, branding them with the sear lines. Use the flip side, with its smooth surface for grilling delicate foods such as fish, seafood and vegetables.

Part Number: GG-GRID-S
Dimension Front-to-Back: 15 3/4”
Dimension Side-to-Side: 8”
Material: Anodized Aluminum
Weight: 2.2

Stainless steel, 304 grade, rock grate with 1/4” rods for WNK & TJK model grills. Replaces former porcelain steel rock grate # GG-GRATE-P.

Part Number: GG-GRATE-SS
Dimension Front-to-Back: 13 5/8”
Dimension Side-to-Side: 22 1/8”
Material: stainless steel
Weight: 5.00

Deflector Shield for Control Panel WNK/TJK for MHP model TJK.

Part Number: GG-DEF
Dimension Front-to-Back: 4”
Dimension Side-to-Side: 20 11/16”
Material: stainless steel
Weight: 0.96

Ignitor Box Assembly for Grill Replacement Parts for JNR, WNK, TJK

For more information about ignition systems and components, please see article Ignition 101 in our help center.

Part Number: GG-IB
Weight: 0.2

Single outlet rotary ignitor. Fits JNR, WNK, TJK.

For more information about ignition systems and components, please see article Ignition 101 in our help center.

Part Number: GG-RI
Weight: 0.1

12” connecting wire for use with rotary igniters. Does not fit battery-operated electronic igniters. Female spade connector on one end connects to electrode, female round connector on the other end connects to rotary igniter. FIts older JNR, WNK, and Patriot grills.

For more information about ignition systems and components, please see article Ignition 101 in our help center.

Part Number: GG-RIW
Weight: 0.3

Rotary Ignitor Knob (Sometimes manufacturer supplies with white arrows or black imprinted arrows.)

For more information about ignition systems and components, please see article Ignition 101 in our help center.

Part Number: GG-K9
Weight: 0.1

Rotary Ignitor kit for JNR, WNK, TJK.

Includes:
• GG-RI Rotary spark generator
• GG-K9 Knob
• GG-IB Electrode & Collector box
• GG-RIW Connecting wire

For more information about ignition systems and components, please see article Ignition 101 in our help center.

Part Number: GG-RIC
Weight: 0.3

Single outlet electronic ignitor. For 2005 models JNR, WNK, TJK.

For more information about ignition systems and components, please see article Ignition 101 in our help center.

Part Number: GG-EIB
Weight: 0.2

Stainless steel grease cup for JNR, WNK, and TJK.

Part Number: GG-GC
Weight: 0.3

Premium quality polyester lined vinyl cover, E-Z on velcro tabs. For large grills, full length.

• 60” left to right
• 20” front to back
• 42” top to bottom

Please measure your grill to determine which cover fits best. Avoid too snug a fit as a slightly oversized cover is easier to take off and put back on.

Part Number: CV4PREM
Material: Vinyl
Weight: 3.5

Main control knob for JNR, WNK, TJK.

• Off position D-Value: 6 o'clock
• Knob diameter: 1 7/8”
• Socket diameter: 5/16”
• Knob shaft: 1/4”

Part Number: GG-K10
Weight: 0.2

Stainless Steel swing away warming rack.

Part Number: GG-TS
Weight: 1.0

Round temperature gauge. Fits MHP Grills JNR, WNK, TJK, GJK, WRG, TRG.

• 2 1/2” diameter.
• Single prob
• Requires 3/8” mounting hole

Part Number: GG-TG4
Weight: 0.15

Rectangular heat indicator for old style MHP grills that has two pegs and a center probe to mount through the casting. It was used on older JNR and WNK grills. We are not sure when MHP changed to the newer heat indicator GG-TG4 that has one larger peg to mount. The GG-TG3 needs two small holes for mounting and one hole in the center for the probe.

Part Number: GG-TG3
Dimensions: 2 5/8” x 2 1/4”
Weight: 0.15

Venturi Tube 12” Brush. Recommended by all grill manufacturers. Specially designed flexible brush to clean venturis of spider webs and other obstructions that can cause flashback fires. Stainless steel.

Part Number: VTC-B
Material: stainless steel
Weight: 0.3