Sams Heat Distribution Plates
Stainless steel heat plate.
Part Number: SCHP6 Dimension Front-to-Back: 11 13/16”
Dimension Side-to-Side: 8 7/16”
Material: stainless steel
Weight: 1.0
SCHP6 fits these 5 Sams models: |
| | |
Stainless steel Flame Tamer.
Part Number: SCHP5 Dimension Front-to-Back: 15”
Dimension Side-to-Side: 7 13/16”
Material: stainless steel
Weight: 1.0
SCHP5 fits this one Sams model: |
| | |
Stainless steel heat plate; also referred to as a flame tamer and savor plate.
Part Number: SCHP4 Dimension Front-to-Back: 16 3/8”
Dimension Side-to-Side: 3 13/16”
Material: stainless steel
Weight: 1.0
SCHP4 fits these 4 Sams models: |
| | |
Stainless steel heat plate.
Part Number: SCHP3 Dimension Front-to-Back: 16 1/8”
Dimension Side-to-Side: 4 5/8”
Material: stainless steel
Weight: 1.0
SCHP3 fits these 5 Sams models: |
| | |
Stainless steel heat plate.
Part Number: SCHP2 Dimension Front-to-Back: 16 1/8”
Dimension Side-to-Side: 8 1/8”
Material: stainless steel
Weight: 1.3
SCHP2 fits these 8 Sams models: |
| | |
Stainless steel heat plate.
Part Number: SCHP1 Dimension Front-to-Back: 14 5/8”
Dimension Side-to-Side: 3 7/8”
Material: stainless steel
Weight: 1.0
SCHP1 fits these 3 Sams models: |
| | |
Ceramic Flame Tamers. Box of 6. Use with rack part# BG-45 (see Rock Grates).
Part Number: SCFT Dimension Front-to-Back: 7”
Dimension Side-to-Side: 8”
Material: ceramic
Weight: 12.0
SCFT fits these 21 Sams models: |
| | |
Rack for ceramic Flame Tamers; nickel plated heavy duty wire 5/16” thick. Uses 12 ceramic flame tamers part# P1736A-R (not included).
NOTE: This replacement part is not exactly like the original P1739A rack, but a very functional replacement. It cannot use the original ceramic Flame Tamers. The original rack held six larger Flame Tamers, while P01720021B-R uses twelve smaller ones. Using only 10 tamers will allow the smoker burner to remain uncovered as was the case with the original rack.
Part Number: P1739A-R
Dimension Front-to-Back: 17 1/4”
Dimension Side-to-Side: 33 7/16”
Material: nickel plated steel
Weight: 8.95
P1739A-R fits these 3 Sams models: |
| | |
Nickel plated heavy duty steel 5/16” thick Flame Tamer rack. Holds six ceramic Flame Tamers part # SCFT/P1736A-R (not included). This is an aftermarket part made to replace original part numbers P1736B and P01722001B, which are no longer available.
Fits models:
- Y0101XC
- Y0202XC
- and others
Part Number: P1736B-R Dimension Front-to-Back: 16 5/8”
Dimension Side-to-Side: 31”
Material: nickel plated steel
Weight: 5.6
P1736B-R fits these 6 Sams models: |
| | |
Ceramic Savor Plate. Measures 7 1/16” x 4 3/4”. Box of 4.
Note: This part is used in racks P01717003E, and P01717002E.
Fits models:
- M3905ALP
- M3905ANG
- M5205ALP
- M5205ANG
- And others
Part Number: P01804006A-R Dimension Front-to-Back: 7 1/16”
Dimension Side-to-Side: 4 3/4”
Material: ceramic
Weight: 4.0
P01804006A-R fits these 4 Sams models: |
| | |
Flame Tamer Rack. Heavy duty nickel plated 5/16” steel rod. Each rack holds twelve (12) P01804001A-R ceramic flame tamers (sold separately). Also known as part number P1736A.
NOTE: This is an aftermarket part made to replace original part number P01722021B, which is no longer available.
Fits models:
- MONARCH04
- Y0660
- and others
Part Number: P01722021B-R Dimension Front-to-Back: 17 1/4”
Dimension Side-to-Side: 33 7/16”
Material: nickel plated steel
Weight: 8.95
P01722021B-R fits these 4 Sams models: |
| | |
Nickel plated heavy duty steel 5/16” thick Flame Tamer rack. Holds six ceramic Flame Tamers part # SCFT/P1736A-R (not included). This is an aftermarket part made to replace original part numbers P1736B and P01722001B, which are no longer available.
Fits models:
- Regal04
- Y005XC-1
- and others
Part Number: P01722001B-R Dimension Front-to-Back: 16 5/8”
Dimension Side-to-Side: 31”
Material: nickel plated steel
Weight: 5.6
P01722001B-R fits these 2 Sams models: |
| | |
Savor Plate Rack. Heavy duty, 304 premium grade stainless steel with 5/16” rods. Each rack holds three (3) P01804006A-R ceramic flame tamers (sold separately).
NOTE: This is an aftermarket part made to replace original part number P01717003E, which is no longer available.
Fits models:
- M3905ALP
- M3905ANG
- and others
Part Number: P01717003E-R Dimension Front-to-Back: 17 3/8”
Dimension Side-to-Side: 9”
Material: nickel plated steel
Weight: 1.0
P01717003E-R fits these 2 Sams models: |
| | |
Savor Plate Rack. Heavy duty, 304 premium grade stainless steel with 5/16” rods. Each rack holds three (3) P01804006A-R ceramic flame tamers (sold separately).
NOTE: This is an aftermarket part made to replace original part number P01717002E, which is no longer available.
Fits models:
- M5205ALP
- M5205ANG
- and others
Part Number: P01717002E-R Dimension Front-to-Back: 17 3/8”
Dimension Side-to-Side: 9”
Material: stainless steel
Weight: 1.0
P01717002E-R fits these 2 Sams models: |
| | |
Stainless steel heat plate/ Flame Tamer.
Part Number: NGSAMHP1 Dimension Front-to-Back: 15 1/4”
Dimension Side-to-Side: 4 7/8”
Material: stainless steel
Weight: 0.6
NGSAMHP1 fits these 4 Sams models: |
| | |
Stainless steel Flame Tamer.
Part Number: NGKIRHP1 Dimension Front-to-Back: 15 3/8”
Dimension Side-to-Side: 5 1/8”
Material: stainless steel
Weight: 1.0
NGKIRHP1 fits this one Sams model: |
| | |
Nexgrill Heat Tent
Part Number: NGHP3 Dimension Front-to-Back: 14 5/8”
Dimension Side-to-Side: 4 1/4”
Material: stainless steel
Weight: 0.75
NGHP3 fits this one Sams model: |
| | |
Stainless steel Flame Tamer.
Part Number: NGHP2 Dimension Front-to-Back: 16 1/8”
Dimension Side-to-Side: 3 3/8”
Material: stainless steel
Weight: 1.0
NGHP2 fits this one Sams model: |
| | |
Stainless steel Flame Tamer.
Part Number: NGCHP4 Dimension Front-to-Back: 17 5/16”
Dimension Side-to-Side: 5 7/8”
Material: stainless steel
Weight: 0.7
NGCHP4 fits these 3 Sams models: |
| | |
Stainless steel Flame Tamer.
Part Number: NGCHP2 Dimension Front-to-Back: 17 3/4”
Dimension Side-to-Side: 6 3/8”
Material: stainless steel
Weight: 0.7
NGCHP2 fits these 2 Sams models: |
| | |
Stainless Steel Flame Tamers for Master Forge BG179 series gas grills. SET OF FOUR (4).
Part Number: MFHP2-X4 Dimension Front-to-Back: 15 3/4”
Dimension Side-to-Side: 5 1/4”
Material: stainless steel
Weight: 2.8
MFHP2-X4 fits this one Sams model: |
| | |
Stainless Steel Flame Tamers for Master Forge BG179 series gas grills. SET OF Three (3).
Part Number: MFHP2-X3 Dimension Front-to-Back: 15 3/4”
Dimension Side-to-Side: 5 1/4”
Material: stainless steel
Weight: 2.1
MFHP2-X3 fits this one Sams model: |
| | |
Master Forge stainless steel Flame Tamer.
Part Number: MFHP2 Dimension Front-to-Back: 15 3/4”
Dimension Side-to-Side: 5 1/4”
Material: stainless steel
Weight: 0.70
MFHP2 fits this one Sams model: |
| | |
Grillmaster Heat Plate
Part Number: GMNGHP1 Dimension Front-to-Back: 14 1/4”
Dimension Side-to-Side: 3 3/8”
Material: stainless steel
Weight: 0.81
GMNGHP1 fits these 3 Sams models: |
| | |
Stainless steel Flavor Grid for Fire Magic Regal II series grills.
- Sold individually
- Commercial grade 304 stainless steel
- Number required varies by model
Part Number: FMHP3 Dimension Front-to-Back: 17 3/4”
Dimension Side-to-Side: 7/716”
Material: stainless steel
Weight: 1.0
105-13003-R-X5 Heat tent. Set of five (5). Stainless steel. Sold individually.
Fits Dyna-Glo DGE486, DGE530, DGF486, and M486 series grills. May fit other models.
This heat tent replaces original Dyna-Glo part 105-13003.
Part Number: DG2-105-13003-R-X5 Dimension Front-to-Back: 15 13/16”
Dimension Side-to-Side: 3 11/16”
Material: stainless steel
Weight: 4.25
DG2-105-13003-R-X5 fits this one Sams model: |
| | |
105-13003-R-X4 Heat tent. Set of four (4). Stainless steel. Sold individually.
Fits Dyna-Glo DGE486, DGE530, DGF486, and M486 series grills. May fit other models.
This heat tent replaces original Dyna-Glo part 105-13003.
Part Number: DG2-105-13003-R-X4 Dimension Front-to-Back: 15 13/16”
Dimension Side-to-Side: 3 11/16”
Material: stainless steel
Weight: 3.4
DG2-105-13003-R-X4 fits this one Sams model: |
| | |
105-13003-R Heat tent. Stainless steel. Sold individually.
Fits Dyna-Glo DGE486, DGE530, DGF486, and M486 series grills. May fit other models.
This heat tent replaces original Dyna-Glo part 105-13003.
Part Number: DG2-105-13003-R Dimension Front-to-Back: 15 13/16”
Dimension Side-to-Side: 3 11/16”
Material: stainless steel
Weight: 0.85
DG2-105-13003-R fits these 2 Sams models: |
| | |
104-13003-R-X3 Heat tent.SET OF THREE (3). Stainless steel. Sold individually.
Fits Backyard Grill BGB390 series grills. May fit other models.
This heat tent replaces original Backyard Grill part 104-13003.
Part Number: DG2-104-13003-R-X3 Dimension Front-to-Back: 15 13/16”
Dimension Side-to-Side: 3 11/16”
Material: stainless steel
Weight: 2.55
DG2-104-13003-R-X3 fits this one Sams model: |
| | |
104-13003-R Heat tent. Stainless steel. Sold individually.
Fits Dyna-Glo DGB390 series grills. May fit other models.
This heat tent replaces original Dyna-Glo part 104-13003.
Part Number: DG2-104-13003-R Dimension Front-to-Back: 15 13/16”
Dimension Side-to-Side: 3 11/16”
Material: stainless steel
Weight: 0.85
DG2-104-13003-R fits this one Sams model: |
| | |
153-03005-R-X5 Heat tent. Set of five (5). Porcelain enameled steel.
Fits Dyna-Glo DGA550 series grills. May fit other models.
This heat tent replaces original Dyna-Glo part 153-03005.
Part Number: DG1-153-03005-R-X5 Dimension Front-to-Back: 15 9/16”
Dimension Side-to-Side: 5”
Material: porcelain steel
Weight: 1.0
DG1-153-03005-R-X5 fits this one Sams model: |
| | |
153-03005-R Heat tent. Porcelain enameled steel. Sold individually.
Fits Dyna-Glo DGA550 series grills. May fit other models.
This heat tent replaces original Dyna-Glo part 153-03005.
Part Number: DG1-153-03005-R Dimension Front-to-Back: 15 9/16”
Dimension Side-to-Side: 5”
Material: porcelain steel
Weight: 1.0
DG1-153-03005-R fits this one Sams model: |
| | |
144-13003-R-X2 Heat tent. Set of two (2). Porcelain enameled steel.
Fits Dyna-Glo DGB730 and M365 series grills. May fit other models.
This heat tent replaces original Dyna-Glo part 144-13003.
Part Number: DG1-144-13003-R-X2 Dimension Front-to-Back: 15 7/8”
Dimension Side-to-Side: 4 1/2”
Material: porcelain steel
Weight: 1.0
DG1-144-13003-R-X2 fits this one Sams model: |
| | |
144-13003-R Heat tent. Porcelain enameled steel. Sold individually.
Fits Dyna-Glo DGB730 and M365 series grills. May fit other models.
This heat tent replaces original Dyna-Glo part 144-13003.
Part Number: DG1-144-13003-R Dimension Front-to-Back: 15 7/8”
Dimension Side-to-Side: 4 1/2”
Material: porcelain steel
Weight: 0.5
DG1-144-13003-R fits this one Sams model: |
| | |
SET OF THREE/3 PACK Stainless steel Flame Tamer. For many models, can also be used to replace ceramic flame tamers and the rack that holds them. Made in USA.
Part Number: CLA2721-X3
Dimension Front-to-Back: 16 3/4”
Dimension Side-to-Side: 9 3/4”
Material: stainless steel
Weight: 7.2
Stainless steel Flame Tamer. For many models, can also be used to replace ceramic flame tamers and the rack that holds them. Made in USA.
Part Number: CLA2721 Dimension Front-to-Back: 16 3/4”
Dimension Side-to-Side: 9 3/4”
Material: stainless steel
Weight: 2.4
CLA2721 fits these 26 Sams models: |
| | |
Stainless steel Flame Tamer. For many models, can also be used to replace ceramic flame tamers and the rack that holds them. Made in USA.
Part Number: CLA2711 Dimension Front-to-Back: 16 7/8”
Dimension Side-to-Side: 10 7/8”
Material: stainless steel
Weight: 2.4
CLA2711 fits these 2 Sams models: |
| | |
Replacement steel Flame Tamer. For many models, can also be used to replace ceramic flame tamers and the rack that holds them. Made in USA.
This part is currently out of stock, but more are already on the way and expected to arrive late Aug Part Number: CLA1721 Dimension Front-to-Back: 16 7/8”
Dimension Side-to-Side: 9 3/4”
Material: carbon steel
Weight: 3.5
CLA1721 fits these 26 Sams models: |
| | |
Replacement steel Flame Tamer. For many models, can also be used to replace ceramic flame tamers and the rack that holds them. Made in USA.
Part Number: CLA1711 Dimension Front-to-Back: 16 7/8”
Dimension Side-to-Side: 10 7/8”
Material: carbon steel
Weight: 4.2
CLA1711 fits these 2 Sams models: |
| | |
Stainless steel Heat Distribution Plate also known as a Flame Tamer and Heat Plate. Fits Member's Mark grill model GR2150901-MM-00. Sold individually, four required. Made in USA.
NOTE: Sometimes shipped with vinyl peel-off coating. Remove before use.
Part Number: CLA-TS0420 Dimension Front-to-Back: 16”
Dimension Side-to-Side: 5”
Material: stainless steel
Weight: .90
CLA-TS0420 fits this one Sams model: |
| | |
Stainless steel Savor Plate, also known as Flamer Tamer and Heat Plate. Sold individually. Made in USA.
NOTE: Sometimes shipped with vinyl peel-off coating. Remove before use.
Part Number: CLA-TS0314 Dimension Front-to-Back: 16 3/8”
Dimension Side-to-Side: 4 1/16”
Material: stainless steel
Weight: .75
CLA-TS0314 fits these 4 Sams models: |
| | |
SET OF FOUR/4 PACK Stainless steel Flame Tamer. Made in USA.
NOTE: Sometimes shipped with vinyl peel-off coating. Remove before use.
Part Number: CLA-TS0216-X4 Dimension Front-to-Back: 15 1/4”
Dimension Side-to-Side: 4 7/8”
Material: stainless steel
Weight: 3.2
CLA-TS0216-X4 fits these 4 Sams models: |
| | |
SET OF THREE/3 PACK Stainless steel Heat Distribution Plates/Flame Tamers. Made in USA.
NOTE: Sometimes shipped with vinyl peel-off coating. Remove before use.
Part Number: CLA-TS0215-X3
Dimension Front-to-Back: 14 1/4”
Dimension Side-to-Side: 4”
Material: stainless steel
Weight: 1.8
SET OF FIVE/5 PACK Stainless steel heat plate/Flame Tamer. Made in USA.
NOTE: Sometimes shipped with vinyl peel-off coating. Remove before use.
Part Number: CLA-TS0158-X5 Dimension Front-to-Back: 16 1/8”
Dimension Side-to-Side: 3 3/8”
Material: stainless steel
Weight: 3.85
CLA-TS0158-X5 fits these 2 Sams models: |
| | |
SET OF FOUR/4 PACK Stainless steel heat plate/Flame Tamer. Made in USA.
NOTE: Sometimes shipped with vinyl peel-off coating. Remove before use.
Part Number: CLA-TS0158-X4 Dimension Front-to-Back: 16 1/8”
Dimension Side-to-Side: 3 3/8”
Material: stainless steel
Weight: 3.08
CLA-TS0158-X4 fits these 2 Sams models: |
| | |
SET OF FOUR/4 PACK Stainless steel heat plate/Flame Tamer. Made in USA.
NOTE: Sometimes shipped with vinyl peel-off coating. Remove before use..
Part Number: CLA-TS0157-X4 Dimension Front-to-Back: 14 9/16”
Dimension Side-to-Side: 3 1/4”
Material: stainless steel
Weight: 2.88
CLA-TS0157-X4 fits these 3 Sams models: |
| | |
SET OF THREE/3 PACK Stainless steel heat plate/Flame Tamer. Made in USA.
NOTE: Sometimes shipped with vinyl peel-off coating. Remove before use.
Part Number: CLA-TS0157-X3 Dimension Front-to-Back: 14 9/16”
Dimension Side-to-Side: 3 1/4”
Material: stainless steel
Weight: 2.16
CLA-TS0157-X3 fits these 3 Sams models: |
| | |
SET OF FOUR/4 PACK Stainless steel Heat Distribution Plates/Flame Tamers. Made in USA.
NOTE: Sometimes shipped with vinyl peel-off coating. Remove before use.e.
Part Number: CLA-TS0156-X4 Dimension Front-to-Back: 16 15/16”
Dimension Side-to-Side: 3 15/16”
Material: stainless steel
Weight: 2.8
CLA-TS0156-X4 fits these 2 Sams models: |
| | |
SET OF THREE/3 PACK Stainless steel Heat Distribution Plates/Flame Tamers. Made in USA.
NOTE: Sometimes shipped with vinyl peel-off coating. Remove before use.e.
Part Number: CLA-TS0156-X3 Dimension Front-to-Back: 16 15/16”
Dimension Side-to-Side: 3 15/16”
Material: stainless steel
Weight: 2.1
CLA-TS0156-X3 fits these 2 Sams models: |
| | |
SET OF THREE/3 PACK Stainless steel heat diffuser. On some grill models it is also known as a Flame Tamer. Made in USA.
NOTE: Sometimes shipped with vinyl peel-off coating. Remove before use.
Part Number: CLA-TS0151-X3 Dimension Front-to-Back: 16 1/8”
Dimension Side-to-Side: 8 1/16”
Material: stainless steel
Weight: 4.05
CLA-TS0151-X3 fits these 10 Sams models: |
| | |
Stainless steel heat plate/Flame Tamer. Made in USA.
NOTE: Sometimes shipped with vinyl peel-off coating. Remove before use.
Part Number: CLA-TS0128 Dimension Front-to-Back: 15”
Dimension Side-to-Side: 7 13/16”
Material: stainless steel
Weight: 1.03
CLA-TS0128 fits this one Sams model: |
| | |
Stainless steel Flame Tamer. Made in USA.
NOTE: Sometimes shipped with vinyl peel-off coating. Remove before use.
Part Number: CLA-TS0083 Dimension Front-to-Back: 17 1/4”
Dimension Side-to-Side: 5”
Material: stainless steel
Weight: 0.9
CLA-TS0083 fits these 3 Sams models: |
| | |
SET OF FOUR/4 PACK Stainless steel Flame Tamer/heat plate.
This heat plate also provides an economical alternative to some other heat plates with the same front-to-back dimension.
- Sold individually, number required varies.
- Shipped with protective peel-off coating, remove before use.
- Made in USA.
Part Number: CLA-TS0020-X4 Dimension Front-to-Back: 17 3/4”
Dimension Side-to-Side: 6 3/8”
Material: stainless steel
Weight: 3.2
CLA-TS0020-X4 fits these 3 Sams models: |
| | |
SET OF THREE/3 PACK Stainless steel Flame Tamer/heat plate.
This heat plate also provides an economical alternative to some other heat plates with the same front-to-back dimension.
- Sold individually, number required varies.
- Shipped with protective peel-off coating, remove before use.
- Made in USA.
Part Number: CLA-TS0020-X3 Dimension Front-to-Back: 17 3/4”
Dimension Side-to-Side: 6 3/8”
Material: stainless steel
Weight: 2.4
CLA-TS0020-X3 fits these 3 Sams models: |
| | |
Stainless steel heat plate/ Flame Tamer. Sold individually, number required varies.
Part Number: BMHP7 Dimension Front-to-Back: 16 13/16”
Dimension Side-to-Side: 3 3/16”
Material: stainless steel
Weight: 0.5
BMHP7 fits this one Sams model: |
| | |
Stainless steel flame tamer.
Part Number: BMHP6
Dimension Front-to-Back: 14 1/4”
Dimension Side-to-Side: 4”
Material: stainless steel
Weight: 1.0
Stainless steel heat distribution plate.
Part Number: BMHP1 Dimension Front-to-Back: 16 3/4”
Dimension Side-to-Side: 3 7/8”
Material: stainless steel
Weight: 0.7
BMHP1 fits these 2 Sams models: |
| | |
105-13003-R-X5 Heat tents. SET OF FIVE (5). Stainless steel. Sold individually.
Fits Backyard Grill BGE530 series grills. May fit other models.
This heat tent replaces original Backyard Grill part 105-13003.
Part Number: BG2-105-13003-R-X5 Dimension Front-to-Back: 15 13/16”
Dimension Side-to-Side: 3 11/16”
Material: stainless steel
Weight: 4.25
BG2-105-13003-R-X5 fits this one Sams model: |
| | |
105-13003-R Heat tent. Stainless steel. Sold individually.
Fits Backyard Grill BGE530 series grills. May fit other models.
This heat tent replaces original Backyard Grill part 105-13003.
Part Number: BG2-105-13003-R Dimension Front-to-Back: 15 13/16”
Dimension Side-to-Side: 3 11/16”
Material: stainless steel
Weight: 0.85
BG2-105-13003-R fits this one Sams model: |
| | |
Stainless steel heat shield/ Flame Tamer. Sold individually, number required varies.
Part Number: BBQHP3 Dimension Front-to-Back: 16 9/16”
Dimension Side-to-Side: 4”
Material: stainless steel
Weight: 0.7
BBQHP3 fits these 2 Sams models: |
| | |
Stainless steel heat plate.
Part Number: BBQHP1 Dimension Front-to-Back: 16 1/8”
Dimension Side-to-Side: 3 1/2”
Material: stainless steel
Weight: 0.7
BBQHP1 fits these 2 Sams models: |
| | |
Porcelain steel Flame Tamers. SET OF SIX.
Part Number: 97371-X6 Dimension Front-to-Back: 14 9/16”
Dimension Side-to-Side: 3 1/4”
Material: porcelain steel
Weight: 3.3
97371-X6 fits these 3 Sams models: |
| | |
Stainless steel heat diffusers. SET OF THREE (3). On some grill models it is also known as a Flame Tamer.
Part Number: 96421-X3 Dimension Front-to-Back: 16 1/8”
Dimension Side-to-Side: 4 5/8”
Material: stainless steel
Weight: 2.55
96421-X3 fits these 3 Sams models: |
| | |
Porcelain steel Flame Tamers.
SET OF EIGHT (8).
Part Number: 93281-X8 Dimension Front-to-Back: 17 1/8”
Dimension Side-to-Side: 4 7/8”
Material: porcelain steel
Weight: 13.6
93281-X8 fits these 2 Sams models: |
| | |
Porcelain steel Flame Tamer. Sold individually.
Part Number: 93281 Dimension Front-to-Back: 17 1/8”
Dimension Side-to-Side: 4 7/8”
Material: porcelain steel
Weight: 1.7
93281 fits these 2 Sams models: |
| | |
Porcelain steel Heat Diffuser. Sold individually. Also known as a Flame Tamer.
Part Number: 93051 Dimension Front-to-Back: 17 1/4”
Dimension Side-to-Side: 4 15/16”
Material: porcelain steel
Weight: 1.6
93051 fits this one Sams model: |
| | |
Porcelain steel Flame Tamers. SET OF TWO (2).
Part Number: 92291-X2 Dimension Front-to-Back: 17 1/8”
Dimension Side-to-Side: 7 3/8”
Material: porcelain steel
Weight: 3.0
92291-X2 fits these 2 Sams models: |
| | |
Porcelain steel Flame Tamer.
Part Number: 92291 Dimension Front-to-Back: 17 1/8”
Dimension Side-to-Side: 7 3/8”
Material: porcelain steel
Weight: 1.5
92291 fits these 2 Sams models: |
| | |
Porcelain steel Heat Diffuser. Sold individually.
Part Number: 92021-X2 Dimension Front-to-Back: 11 13/16”
Dimension Side-to-Side: 8 7/16”
Material: porcelain steel
Weight: 2.6
92021-X2 fits these 5 Sams models: |
| | |
Stainless steel Heat Tents. SET OF FIVE (5).
Part Number: 91921-X5 Dimension Front-to-Back: 15 1/2”
Dimension Side-to-Side: 3 1/8”
Material: stainless steel
Weight: 4.5
91921-X5 fits this one Sams model: |
| | |
stainless steel heat plate
Part Number: 91921 Dimension Front-to-Back: 15 1/2”
Dimension Side-to-Side: 3 1/8”
Material: stainless steel
Weight: 0.9
91921 fits this one Sams model: |
| | |
Stainless steel replacement Heat Tent. Far better rust and corrosion resistance than the original porcelain steel version. Made in USA.
NOTE: Sometimes shipped with vinyl peel-off coating, remove before use.
Part Number: 47183T-24-R
Dimension Front-to-Back: 16 1/2”
Dimension Side-to-Side: 4”
Material: stainless steel
Weight: 0.80
47183T-24-R fits these 3 Sams models: |
| | |
stainless steel Flav-R-Wave heat plate.
This part is currently out of stock, but more are already on the way and expected to arrive late June Part Number: 10222-T225 Dimension Front-to-Back: 16 1/2”
Dimension Side-to-Side: 9 1/8”
Material: stainless steel
Weight: 1.85
10222-T225 fits this one Sams model: |
| | |