Viking Igniter Components

PA020023-R Rrotary piezo spark generator with two connector outlets. Also known in Viking documentation as ”DUAL OUTPUT IGNITION SWITCH-(VGBQ) 1691-04”.

• Includes knob part# PB010156
• No battery required.

NOTE: Not a VIKING branded product. This is an aftermarket part designed to replace original Viking ignition part PA020023.

For more information about ignition systems and components, please see article Ignition 101 in our help center.

Part Number: VIK2-PA020023-R
Weight: 0.3

VIK2-PA020023-R fits these 15 Viking models:
VGBQ300-2 VGBQ300-2R VGBQ300-2RS	VGBQ410-3 VGBQ410-3R VGBQ410-3RS	VGBQ412-2 VGBQ412-2R VGBQ412-2RS	VGBQ530-4 VGBQ530-4R VGBQ530-4RS	VGBQ532-3 VGBQ532-3R VGBQ532-3RS

PA020022-R Spark generator. Rotary piezo with single round connector outlet. Also known in Viking documentation as ”SINGLE OUTPUT IGNITION SWITCH-(VGBQ (1691.06)”.

• No battery required.
• Includes knob part# PB010156

NOTE: Not a VIKING branded product. This is an aftermarket part designed to replace original Viking ignition part PA020022.

For more information about ignition systems and components, please see article Ignition 101 in our help center.

Part Number: VIK2-PA020022-R
Weight: 0.12

VIK2-PA020022-R fits these 15 Viking models:
VGBQ300-2 VGBQ300-2R VGBQ300-2RS	VGBQ410-3 VGBQ410-3R VGBQ410-3RS	VGBQ412-2 VGBQ412-2R VGBQ412-2RS	VGBQ530-4 VGBQ530-4R VGBQ530-4RS	VGBQ532-3 VGBQ532-3R VGBQ532-3RS

B040288-R-X2 SET OF FOUR (4). Electrodes with m spade wide connection. Also known in Viking documentation as ”SMOKER BURNER IGNITER”. This part replaces: PB040288 and PB040179

Includes short adapter wire (not shown) to convert the wide male spade conector on the electrode to a standard male spade connector. This allows the use of wires with standard spade connectors.

NOTE: Not a VIKING branded product. This is an aftermarket part designed to replace original Viking part PB040288.

For more information about ignition systems and components, please see article Ignition 101 in our help center.

Part Number: VIK-PB040288-R-X4
Weight: 0.2

VIK-PB040288-R-X4 fits this one Viking model:
VGBQ5540-4RE

B040288-R-X3 SET OF THREE (3) Electrodes with m spade wide connection. Also known in Viking documentation as ”SMOKER BURNER IGNITER”. This part replaces: PB040288 and PB040179

Includes short adapter wire (not shown) to convert the wide male spade conector on the electrode to a standard male spade connector. This allows the use of wires with standard spade connectors.

NOTE: Not a VIKING branded product. This is an aftermarket part designed to replace original Viking part PB040288.

For more information about ignition systems and components, please see article Ignition 101 in our help center.

Part Number: VIK-PB040288-R-X3
Weight: 0.3

VIK-PB040288-R-X3 fits these 3 Viking models:
VGBQ53624	VGIQ411-2RT1SS	VGIQ5420-3RE

PB040288-R Electrode with m spade wide connection. Also known in Viking documentation as ”SMOKER BURNER IGNITER”. This part replaces: PB040288 and PB040179

Includes short adapter wire (not shown) to convert the wide male spade conector on the electrode to a standard male spade connector. This allows the use of wires with standard spade connectors.

NOTE: Not a VIKING branded product. This is an aftermarket part designed to replace original Viking part PB040288.

For more information about ignition systems and components, please see article Ignition 101 in our help center.

Part Number: VIK-PB040288-R
Weight: 0.1

VIK-PB040288-R fits these 3 Viking models:
VGIQ411-2RT1SS	VGIQ5420-3RE	VGIQ5540-4RE

PB040287-R Two-prong Electrode. Also known in Viking documentation as ”GRILL BURNER IGNITER”.

NOTE: Not a VIKING branded product. This is an aftermarket part designed to replace original Viking part PB040287.

For more information about ignition systems and components, please see article Ignition 101 in our help center.

Part Number: VIK-PB040287-R
Weight: 0.25

VIK-PB040287-R fits this one Viking model:
VGIQ411-2RT1SS

PB040179-R-X2 SET OF TWO (2) Electrodes with m spade wide connection. Also known in Viking documentation as ”SMOKER IGNITER” and ”SMOKER SPARK IGNITOR”.

Includes short adapter wire (not shown) to convert the wide male spade conector on the electrode to a standard male spade connector. This allows the use of wires with standard spade connectors.

NOTE: Not a VIKING branded product. This is an aftermarket part designed to replace original Viking part PB040179.

For more information about ignition systems and components, please see article Ignition 101 in our help center.

Part Number: VIK-PB040179-R-X2
Weight: 0.2

VIK-PB040179-R-X2 fits these 9 Viking models:
VGBQ300-2RE VGIQ410-3RE	VGIQ410-3RT VGIQ412-2RE	VGIQ412-2RT VGIQ530	VGIQ530-4RE VGIQ530-4RT	VGIQ532-3RE

PB040179-R Electrode with m spade wide connection. Also known in Viking documentation as ”SMOKER IGNITER” and ”SMOKER SPARK IGNITOR”.

Includes short adapter wire (not shown) to convert the wide male spade conector on the electrode to a standard male spade connector. This allows the use of wires with standard spade connectors.

NOTE: Not a VIKING branded product. This is an aftermarket part designed to replace original Viking part PB040179.

For more information about ignition systems and components, please see article Ignition 101 in our help center.

Part Number: VIK-PB040179-R
Weight: 0.1

VIK-PB040179-R fits these 8 Viking models:
VGBQ300-2RE VGIQ410-3RE	VGIQ410-3RT VGIQ412-2RE	VGIQ412-2RT VGIQ530-4RE	VGIQ530-4RT VGIQ532-3RE

PB040176-R-X3 SET OF THREE (3) Two-prong Electrodes. Also known in Viking documentation as ”IGNITER”.

NOTE: Not a VIKING branded product. This is an aftermarket part designed to replace original Viking part PB040176.

For more information about ignition systems and components, please see article Ignition 101 in our help center.

Part Number: VIK-PB040176-R-X3
Weight: 0.75

VIK-PB040176-R-X3 fits these 2 Viking models:
VGIQ530	VGIQ530-4RE

PB040176-R-X2 SET OF TWO (2) Two-prong Electrodes. Also known in Viking documentation as ”IGNITER”.

NOTE: Not a VIKING branded product. This is an aftermarket part designed to replace original Viking part PB040176.

For more information about ignition systems and components, please see article Ignition 101 in our help center.

Part Number: VIK-PB040176-R-X2
Weight: 0.50

VIK-PB040176-R-X2 fits these 6 Viking models:
VGIQ410 VGIQ410-3RE	VGIQ410-3RT VGIQ412-2RT	VGIQ530-4RT VGIQ532-3RE

PB040176-R Two-prong Electrode. Also known in Viking documentation as ”IGNITER”.

NOTE: Not a VIKING branded product. This is an aftermarket part designed to replace original Viking part PB040176.

For more information about ignition systems and components, please see article Ignition 101 in our help center.

Part Number: VIK-PB040176-R
Weight: 0.25

VIK-PB040176-R fits these 8 Viking models:
VGIQ410 VGIQ410-3RE	VGIQ410-3RT VGIQ412-2RE	VGIQ412-2RT VGIQ530-4RE	VGIQ530-4RT VGIQ532-3RE

VIK-PA020036-R Spark Module. 4-Spark electronic ignition module. Requires 1 AA battery (not included).

NOTE: Not a VIKING branded product. This is an aftermarket part designed to replace original Viking grate part PA020036.

For more information about ignition systems and components, please see article Ignition 101 in our help center.

Part Number: VIK-PA020036-R
Weight: .33

VIK-PA020036-R fits these 23 Viking models:
VFBQ6203T1SS VFIQ6203 VGBQ030-2T VGBQ13002 VGBQ13603	VGBQ300-2RT VGBQ300-2RT1 VGBQ300-2RT2 VGBQ410-3RT VGBQ412-2RT	VGBQ532-3RT VGBQ532T VGIQ300-2RT VGIQ410 VGIQ410-3RT	VGIQ410-3RT1SS VGIQ410-3RT2 VGIQ412-2RT VGIQ530 VGIQ530-4RT	VGIQ530-4RT2 VGIQ532-3RT VGIQ532-3RT1

008091-000-R-X3 SET OF THREE (3) Electrodes with m spade wide connection. Also known in Viking documentation as ”PB040288 IGNITOR KIT”. This part replaces: PB040288, PB040179

Includes short adapter wire (not shown) to convert the wide male spade conector on the electrode to a standard male spade connector. This allows the use of wires with standard spade connectors.

NOTE: Not a VIKING branded product. This is an aftermarket part designed to replace original Viking part 008091-000.

For more information about ignition systems and components, please see article Ignition 101 in our help center.

Part Number: VIK-008091-000-R-X3
Weight: 0.3

VIK-008091-000-R-X3 fits these 16 Viking models:
VFBQ6203T1SS VFIQ6203 VGBQ13603 VGBQ300-2RE1	VGBQ300-2RT1 VGBQ410-3RE2 VGBQ412-2RE1 VGBQ532-3RE1	VGBQ5420-3RE VGBQ54224 VGIQ410-3RE1 VGIQ411-2RE1	VGIQ530-4RE2 VGIQ530-4RT2 VGIQ532-3RE1 VGIQ55424

008091-000-R-X2 SET OF TWO (2) Electrodes with m spade wide connection. Also known in Viking documentation as ”PB040288 IGNITOR KIT”. This part replaces: PB040288, PB040179

Includes short adapter wire (not shown) to convert the wide male spade conector on the electrode to a standard male spade connector. This allows the use of wires with standard spade connectors.

NOTE: Not a VIKING branded product. This is an aftermarket part designed to replace original Viking part 008091-000.

For more information about ignition systems and components, please see article Ignition 101 in our help center.

Part Number: VIK-008091-000-R-X2
Weight: 0.2

VIK-008091-000-R-X2 fits these 25 Viking models:
VGBQ13002 VGBQ300-2RE2 VGBQ300-2RT VGBQ300-2RT2 VGBQ33002RE	VGBQ3300RE VGBQ410-3RE VGBQ410-3RT VGBQ412-2RE VGBQ412-2RE2	VGBQ530-4RE VGBQ530-4RE1 VGBQ530-4RT VGBQ5300-2RE VGBQ53024	VGBQ532-3RE VGBQ532-3RT VGIQ410-3RE2 VGIQ410-3RT1SS VGIQ410-3RT2	VGIQ530-4RE1 VGIQ532-3RE2 VGIQ532-3RT VGIQ532-3RT1 VGIQ54224

008091-000-R Electrode with m spade wide connection. Also known in Viking documentation as ”PB040288 IGNITOR KIT”. This part replaces: PB040288, PB040179

Includes short adapter wire (not shown) to convert the wide male spade conector on the electrode to a standard male spade connector. This allows the use of wires with standard spade connectors.

NOTE: Not a VIKING branded product. This is an aftermarket part designed to replace original Viking part 008091-000.

For more information about ignition systems and components, please see article Ignition 101 in our help center.

Part Number: VIK-008091-000-R
Weight: 0.1

VIK-008091-000-R fits these 49 Viking models:
VFBQ6203T1SS VFIQ6203 VGBQ13002 VGBQ13603 VGBQ300-2RE1 VGBQ300-2RE2 VGBQ300-2RT	VGBQ300-2RT1 VGBQ300-2RT2 VGBQ33002RE VGBQ3300RE VGBQ33603RE VGBQ410-3RE VGBQ410-3RE2	VGBQ410-3RT VGBQ412-2RE VGBQ412-2RE1 VGBQ412-2RE2 VGBQ412-2RT VGBQ530-4RE VGBQ530-4RE1	VGBQ530-4RE2 VGBQ530-4RT VGBQ5300-2RE VGBQ53024 VGBQ532-3RE VGBQ532-3RE1 VGBQ532-3RT	VGBQ532T VGBQ53624 VGBQ5420-3RE VGBQ54224 VGBQ5540-4RE VGBQ55424 15 more models...

008090-000-R Two prong Electrode. Also known in Viking documentation as ”PB040287 IGNITOR KIT”. This part also replaces parts PB040287, PB040176

NOTE: Not a VIKING branded product. This is an aftermarket part designed to replace original Viking part 008090-000.

For more information about ignition systems and components, please see article Ignition 101 in our help center.

Part Number: VIK-008090-000-R-X4
Weight: 1.00

VIK-008090-000-R-X4 fits this one Viking model:
VGBQ410-3RE1

008090-000-R-X3 SET OF THREE (3) two-prong Electrodes. Also known in Viking documentation as ”PB040287 IGNITOR KIT”. This part also replaces parts PB040287 and PB040176

NOTE: Not a VIKING branded product. This is an aftermarket part designed to replace original Viking part 008090-000.

For more information about ignition systems and components, please see article Ignition 101 in our help center.

Part Number: VIK-008090-000-R-X3
Weight: 0.75

VIK-008090-000-R-X3 fits these 3 Viking models:
VGBQ530-4RE	VGBQ530-4RE1	VGIQ530

008090-000-R-X2 SET OF TWO (2) Two-prong Electrodes. Also known in Viking documentation as ”PB040287 IGNITOR KIT”. This part also replaces parts PB040287, PB040176

NOTE: Not a VIKING branded product. This is an aftermarket part designed to replace original Viking part 008090-000.

For more information about ignition systems and components, please see article Ignition 101 in our help center.

Part Number: VIK-008090-000-R-X2
Weight: 0.5

VIK-008090-000-R-X2 fits these 10 Viking models:
VGBQ030-2T VGBQ410-3RE	VGBQ410-3RT VGBQ412-2RT	VGBQ530-4RT VGBQ532-3RE	VGBQ532-3RT VGBQ532T	VGIQ300-2RT VGIQ532-3RT

008090-000-R Two prong Electrode. Also known in Viking documentation as ”PB040287 IGNITOR KIT”. This part also replaces parts PB040287, PB040176

NOTE: Not a VIKING branded product. This is an aftermarket part designed to replace original Viking part 008090-000.

For more information about ignition systems and components, please see article Ignition 101 in our help center.

Part Number: VIK-008090-000-R
Weight: 0.25

VIK-008090-000-R fits these 21 Viking models:
VGBQ030-2T VGBQ300-2RE VGBQ300-2RT VGBQ300-2RT1 VGBQ410-3RE	VGBQ410-3RE1 VGBQ410-3RT VGBQ412-2RE VGBQ412-2RT VGBQ530-4RE	VGBQ530-4RE1 VGBQ530-4RT VGBQ532-3RE VGBQ532-3RT VGBQ532T	VGIQ300-2RT VGIQ410-3RE1 VGIQ410-3RT1SS VGIQ411-2RE1 VGIQ530	VGIQ532-3RT

Universal 3 outlet rotary spark generator. Includes knob.

For more information about ignition systems and components, please see article Ignition 101 in our help center.

Part Number: UP-8B
Weight: 0.3

Universal two outlet rotary spark generator. Includes knob and hardware.

For more information about ignition systems and components, please see article Ignition 101 in our help center.

Part Number: UP-6B
Weight: 0.3

Universal one outlet rotary spark generator. Includes knob and hardware.

For more information about ignition systems and components, please see article Ignition 101 in our help center.

Part Number: UP-5B
Weight: 0.12

Universal push-button igniter. Round male connector. Includes locking nut.

For more information about ignition systems and components, please see article Ignition 101 in our help center.

Part Number: UP-4B
Weight: 0.3

4 Prong Ignitor Module for Alfresco & Viking Grills

For more information about ignition systems and components, please see article Ignition 101 in our help center.

Part Number: IGEIB17-B
Weight: .33

Universal extention wire, male spade end & female round end.

For more information about ignition systems and components, please see article Ignition 101 in our help center.

Part Number: IG-46B
Dimensions: 2 1/2
Weight: 0.10

Wire for Viking Electrode 19”

For more information about ignition systems and components, please see article Ignition 101 in our help center.

Part Number: IG-43B
Dimensions: 19
Weight: 0.25

Electrode for U-Shaped Viking Burner

For more information about ignition systems and components, please see article Ignition 101 in our help center.

Part Number: IG-41B
Weight: 0.25

46” Wire with female spade connectors and square plastic connectors.

For more information about ignition systems and components, please see article Ignition 101 in our help center.

Part Number: IG-30B
Dimensions: 46
Weight: 0.1

IG-30B fits these 57 Viking models:
VFBQ6203T1SS VFIQ6203 VGBQ13002 VGBQ13603 VGBQ300-2RE VGBQ300-2RE1 VGBQ300-2RE2	VGBQ300-2RT VGBQ300-2RT1 VGBQ300-2RT2 VGBQ33002RE VGBQ3300RE VGBQ33603RE VGBQ410-3RE	VGBQ410-3RE2 VGBQ410-3RT VGBQ412-2RE VGBQ412-2RE1 VGBQ412-2RE2 VGBQ412-2RT VGBQ530-4RE	VGBQ530-4RE1 VGBQ530-4RE2 VGBQ530-4RT VGBQ5300-2RE VGBQ53024 VGBQ532-3RE VGBQ532-3RE1	VGBQ532-3RT VGBQ532T VGBQ53624 VGBQ5420-3RE VGBQ54224 VGBQ5540-4RE 23 more models...

20” igniter wire with two (2) female spade connectors.

For more information about ignition systems and components, please see article Ignition 101 in our help center.

Part Number: IG-18B
Weight: 0.03

IG-18B fits these 57 Viking models:
VFBQ6203T1SS VFIQ6203 VGBQ13002 VGBQ13603 VGBQ300-2RE VGBQ300-2RE1 VGBQ300-2RE2	VGBQ300-2RT VGBQ300-2RT1 VGBQ300-2RT2 VGBQ33002RE VGBQ3300RE VGBQ33603RE VGBQ410-3RE	VGBQ410-3RE2 VGBQ410-3RT VGBQ412-2RE VGBQ412-2RE1 VGBQ412-2RE2 VGBQ412-2RT VGBQ530-4RE	VGBQ530-4RE1 VGBQ530-4RE2 VGBQ530-4RT VGBQ5300-2RE VGBQ53024 VGBQ532-3RE VGBQ532-3RE1	VGBQ532-3RT VGBQ532T VGBQ53624 VGBQ5420-3RE VGBQ54224 VGBQ5540-4RE 23 more models...

Universal collector box with electrode and wire. Fits most H burners, cast iron and stainless. Mounts to burner using venturi screws. Slotted construction allow universal adjustment of electrode position.

For more information about ignition systems and components, please see article Ignition 101 in our help center.

Part Number: IG-15B
Weight: 0.3

Universal adapter wire with male round and female spade connectors.

For more information about ignition systems and components, please see article Ignition 101 in our help center.

Part Number: 03751
Weight: 0.05

Universal battery powered push button ignitor.

• 1.5 volt
• Has five (5) terminals (male spade connector)
• Uses a single AA battery (not included))
• 03610 and 03620 wires are commonly used with this igniter (not included)
• Requires 7/8” mounting hole
• Overall dimensions: 2” x 3 3/8” x 3”
• Some original igniters had an integrated ground wire. Use wire part# 03620 for this purpose.

For more information about ignition systems and components, please see article Ignition 101 in our help center.

Part Number: 03380
Dimensions: 3 5/16” x 2”
Weight: 0.7

Universal three-outlet battery powered push button ignitor.

• 1.5 volt
• Has three (3) terminals (male spade connector)
• Uses a single AA battery (not included)
• 03610 and 03620 wires are commonly used with this igniter (not included)
• Requires 7/8” mounting hole

For more information about ignition systems and components, please see article Ignition 101 in our help center.

Part Number: 03333
Dimensions: 2 9/16” x 2”
Weight: 0.5

Universal 2 3/4” adaptor wire with a round female end and a male spade end that has a protective cover.

For more information about ignition systems and components, please see article Ignition 101 in our help center.

Part Number: 03199C
Weight: 0.05

Universal 5 1/2” jumper wire with female spade ends to close off unused pair of outlets in battery-powered spark generator, or use as an adaptor wire.
NOTICE: EACH END HAS A PLASTIC PROTECTOR CAP.

For more information about ignition systems and components, please see article Ignition 101 in our help center.

Part Number: 03197
Weight: 0.05