Coleman 9998 Grill Parts

Highest quality replacement parts for your Coleman 9998 - Free USA shipping $49 or more* - No Sales Tax*

Coleman 9998 owners manual and diagrams

Diagrams & owners manual not available for grill model# 9998. If you have a manual you're willing to share, please click here to send us an email with the attached manual. Thank You!

Replacement grill parts to fit Coleman model: 9998

On this page you'll find all of the parts that fit model Coleman 9998. If you can't find the part you need below, click on the appropriate category button on the right side of the page. For example, if your looking for a cooking grid and there are none here, click the cooking grids button to see all of the cooking grids we have for Coleman grills. Knowing the dimensions of your existing part will help you find the right part.

To get the correct Coleman 9998 BBQ parts

You should measure your existing parts and compare them to what we show here. This is best done with them removed from the grill.
Verify your Coleman model number by checking the CSA appliance tag on your grill to make sure you have the correct model number. Do not rely solely on the owners manual as these are frequently mixed up at retail stores when the grills are assembled. You'd be surprised at how many folks have the wrong owners manual.

9998 Burners

SCTB1

Click for photos

Stainless steel burner for Coleman model 9998.

Part Number: SCTB1
Dimensions: 15 3/8
Material: stainless steel
Weight: 0.43

==> All Coleman Burners.

9998 Cooking Grids

69983

Click for photos

Cast iron cooking grids (set of 3) for Coleman model 9998. Porcelain enameled, glossy finish.

Part Number: 69983
Dimension Front-to-Back: 17 5/8”
Dimension Side-to-Side: 34 7/8”
Material: gloss cast iron
Weight: 19.5

==> All Coleman Cooking Grids.

9998 Heat Plates

SONHP1

Click for photos

Stainless steel Flavor Grid for Coleman model 9998.

Part Number: SONHP1
Dimension Front-to-Back: 15 3/16”
Dimension Side-to-Side: 5 7/16”
Material: stainless steel
Weight: 0.6

==> All Coleman Heat Plates.

9998 Igniter Components

03153

Click for photos

round trigger switch for AA and AAA spark generators; use original wires

For more information about ignition systems and components, please see article Ignition 101 in our help center.

Part Number: 03153
Dimensions: 17 3/4” x 1”
Weight: 0.1

03197

Click for photos

Universal 5 1/2” jumper wire with female spade ends to close off unused pair of outlets in battery-powered spark generator, or use as an adaptor wire.
NOTICE: EACH END HAS A PLASTIC PROTECTOR CAP.

For more information about ignition systems and components, please see article Ignition 101 in our help center.

Part Number: 03197
Weight: 0.05

04423

Click for photos

Ceramic electrode and 39” wire with female spade connector.

For more information about ignition systems and components, please see article Ignition 101 in our help center.

Part Number: 04423
Material: ceramic
Weight: 0.2

IGEIB14-B

Click for photos

DCS (9 Volt) 4-Prong Spark Generator

For more information about ignition systems and components, please see article Ignition 101 in our help center.

Part Number: IGEIB14-B
Weight: 0.40

IG-30B

Click for photos

46” Wire with female spade connectors and square plastic connectors.

For more information about ignition systems and components, please see article Ignition 101 in our help center.

Part Number: IG-30B
Dimensions: 46
Weight: 0.1

IG-31B

Click for photos

Electrode to Fit Many Import Grills Including some Kenmore, BBQ Pro, Sam's Club, K-Mart, Etc….

For more information about ignition systems and components, please see article Ignition 101 in our help center.

Part Number: IG-31B
Weight: .05

==> All Coleman Igniter Components.

9998 Knobs and Handles

02342

Click for photos

Universal 2 5/16” knob.

Selectable D-Value
Selectable socket diameter - 6mm or 8mm.
Selectable shaft length - flush, 1/4”, or 1 5/8”. Shafts can also be trimmed to desired length.
Includes 6 shaft inserts and set screw.
Fits any grill with inside bezel diameter greater than 2 5/16” (the knob diameter).

Part Number: 02342
Dimensions: 2 5/16” x 2 5/16”
Material: plastic
Weight: 0.20

==> All Coleman Knobs and Handles.

9998 Heat indicators and Meat Thermometers

22551

Click for photos

Oval lid heat indicator. Three-hole mount with two threaded studs 1 1/2” offset on center. Requires 3/8” center hole for temperature sensor probe.

Part Number: 22551
Dimensions: 2 15/16” x 1 7/8”
Weight: 0.2

==> All Coleman Heat indicators and Meat Thermometers.

9998 Accessories

BB-5

Click for photos

Basting brush with angled oak handle. 18” overall length.

Part Number: BB-5
Dimensions: 18
Weight: 0.8

VTC-B

Click for photos

Venturi Tube 12” Brush. Recommended by all grill manufacturers. Specially designed flexible brush to clean venturis of spider webs and other obstructions that can cause flashback fires. Stainless steel.

Part Number: VTC-B
Material: stainless steel
Weight: 0.3

==> All 9998 Accessories.

BBQ Part Categories

Coleman 9998 -Sunday, Jan 26 2025

Return to Coleman grill parts main page

More Coleman grill models we have parts for

85-3046-2 | 85-3047-0 | 85-3066-4 | 85-3067-2 | 85-3068-0 | 85-3069-8 | 85-3074-4 | 85-3075-2 | 85-3076-0 | 85-3077-8 | 85-3092-0 | 85-3093-8 | 85-3114-0 | 85-3115-8 | 85-3118-2 | 85-3119-0 | 85-3120-4 | 85-3121-2 | 85-3139-2 | 85-3140-6 | 9943-780(9000I Console Grill) | 9947-706 | 9947-726 | 9947-736 | 9947A726 | 9990-132 | 9990-132D | 9990-141 | 9990-142 | 9990-646 | 9990-646D | 9991-132 | 9991-141 | 9991-142 | 9991-646 | 9991-646D | 9992-141 | 9992-643 | 9992-644 | 9992-645 | 9992-646 | 9992-647 | 9992-648 | 9992-649 | 9993 | 9993-A60 | 9998 Series | 9998-A60 | AG30610EB | Complete list of Coleman grill models...

*Orders for Coleman grill model 9998 $49 and over ship free to the lower 48 states.
See shipping policy below for more info.

Home | About Us | Contact Us | Privacy Policy | Shipping Policy | Return Policy
January 26, 2025