Nexgrill 720-0718N Grill Parts

Nexgrill 720-0718N

Highest quality replacement parts for your Nexgrill 720-0718N - Free USA shipping $49 or more* - No Sales Tax*

Nexgrill 720-0718N owners manual and diagrams

Diagrams & owners manual not available for grill model# 720-0718N. If you have a manual you're willing to share, please click here to send us an email with the attached manual. Thank You!

Replacement gas grill parts for Nexgrill model: 720-0718N

On this page you'll find all of the parts that fit model Nexgrill 720-0718N. If the part you're shopping for isn't included below, you might find it using the category buttons on the right side of the page. For example, if your looking for a warming rack and there are none here, click the warming rack button to see all of the racks we have for Nexgrill grills. You will need to know the dimensions of your existing grids to help you find the right part.

To get the correct Nexgrill 720-0718N BBQ parts

You should measure your existing parts and compare them to what we show here. This is best done with them removed from the grill.
Verify your Nexgrill model number by checking the CSA appliance tag on your grill to make sure you have the correct model number. Do not rely solely on the owners manual as these are frequently mixed up at retail stores when the grills are assembled. You'd be surprised at how many folks have the wrong owners manual.

720-0718N Burners

CBP6

Click for photos

Stainless steel burner for Nexgrill model 720-0718N.

Part Number: CBP6
Dimensions: 14 3/8” x 1”
Material: stainless steel
Weight: 1.0

==> All Nexgrill Burners.

720-0718N Cooking Grids

51641

Click for photos

Porcelain steel cooking grid for Nexgrill model 720-0718N. Porcelain enameled, glossy finish. Sold individually.

Part Number: 51641
Dimension Front-to-Back: 17 3/8”
Dimension Side-to-Side: 17 7/16”
Material: porcelain steel wire
Weight: 4.9

==> All Nexgrill Cooking Grids.

720-0718N Heat Plates

CLA-TS0153-X4

Click for photos

SET OF FOUR/4 PACK Stainless steel heat plate/Flame Tamer for Nexgrill model 720-0718N. Made in USA.

NOTE: Sometimes shipped with vinyl peel-off coating. Remove before use.

Part Number: CLA-TS0153-X4
Dimension Front-to-Back: 15 1/8”
Dimension Side-to-Side: 5 5/8”
Material: stainless steel
Weight: 3.2

NGKHP3

Click for photos

Stainless steel Flame Tamer for Nexgrill model 720-0718N.

Part Number: NGKHP3
Dimension Front-to-Back: 15 1/8”
Dimension Side-to-Side: 5 9/16”
Material: stainless steel
Weight: 1.0

==> All Nexgrill Heat Plates.

720-0718N Igniter Components

TS-IG4010

Click for photos

Push-button electronic igniter with four (4) spade connectors. Black cap. Uses one AAA battery (not included). Requires a 3/4” mounting hole.

For more information about ignition systems and components, please see article Ignition 101 in our help center.

Part Number: TS-IG4010
Weight: 0.2

IGEIB4-B

Click for photos

Battery powered push button igniter.

Has four (4) spade type male connectors.
Uses 1 AAA battery (not supplied)
Requires 3/4” or 13/16” mounting hole.

For more information about ignition systems and components, please see article Ignition 101 in our help center.

Part Number: IGEIB4-B
Weight: 0.3

IG-19B

Click for photos

Burner-mounted ceramic electrode, wire, and mounting bracket.

For more information about ignition systems and components, please see article Ignition 101 in our help center.

Part Number: IG-19B
Weight: 0.1

IG-30B

Click for photos

46” Wire with female spade connectors and square plastic connectors.

For more information about ignition systems and components, please see article Ignition 101 in our help center.

Part Number: IG-30B
Dimensions: 46
Weight: 0.1

IG-48B

Click for photos

16” Universal Ignitor Wire

For more information about ignition systems and components, please see article Ignition 101 in our help center.

Part Number: IG-48B
Dimensions: 16
Weight: 0.05

==> All Nexgrill Igniter Components.

720-0718N Heat indicators and Meat Thermometers

22551

Click for photos

Oval lid heat indicator. Three-hole mount with two threaded studs 1 1/2” offset on center. Requires 3/8” center hole for temperature sensor probe.

Part Number: 22551
Dimensions: 2 15/16” x 1 7/8”
Weight: 0.2

==> All Nexgrill Heat indicators and Meat Thermometers.

720-0718N Accessories

BP-5

Wundersmoke Mesquite Chips. These unique mesquite wood smoking chips add distinctive flavoring to your food. For use will all grills. Comes with reusable puck. One 1lb bag.

Part Number: BP-5
Weight: 1.0

40269

Click for photos

20” Professional Extra Long Tong.
20” Stainless steel tong with red soft grip rubber inserts. Grip your food on the grill with ease. Manual lock saves on storage space.

Part Number: 40269
Material: stainless steel
Weight: 0.14

BB-5

Click for photos

Basting brush with angled oak handle. 18” overall length.

Part Number: BB-5
Dimensions: 18
Weight: 0.8

==> All 720-0718N Accessories.

BBQ Part Categories

Nexgrill model 720-0718N - Thursday, Sep 5 2024

Return to Nexgrill grills main page

More Nexgrill grill models we have parts for

720-0419 | 720-0430 | 720-0432 | 720-0433 | 720-0439 | 720-0440-LP | 720-0441-LP | 720-0459 | 720-0486 | 720-0490 | 720-0511 | 720-0512 | 720-0522 | 720-0522CAN | 720-0536 | 720-0539 | 720-0548 | 720-0549 | 720-0578 | 720-0582 | 720-0582B | 720-0584 | 720-0584A | 720-0586 | 720-0586A | 720-0600 | 720-0607 | 720-0617 | 720-0649 | 720-0650 | 720-0650A | 720-0665 | 720-0670 | 720-0670A | 720-0670B | 720-0670C | 720-0670E | 720-0671 | 720-0677 | 720-0678 | 720-0679 | 720-0679B | 720-0679R | 720-0691A | 720-0697 | 720-0697E | 720-0709 | 720-0709B | 720-0709C | 720-0718 | Complete list of Nexgrill grill models...

*Orders for Nexgrill grill model 720-0718N $49 and over ship free to the lower 48 states.
See shipping policy below for more info.

Home | Contact Us | Privacy Policy | Return Policy | Shipping Policy | About Us
Date: Thursday, September 5, 2024