Member's Mark Igniter Components

Universal 3 outlet rotary spark generator. Includes knob.

For more information about ignition systems and components, please see article Ignition 101 in our help center.

Part Number: UP-8B
Weight: 0.3

Universal two outlet rotary spark generator. Includes knob and hardware.

For more information about ignition systems and components, please see article Ignition 101 in our help center.

Part Number: UP-6B
Weight: 0.3

Universal one outlet rotary spark generator. Includes knob and hardware.

For more information about ignition systems and components, please see article Ignition 101 in our help center.

Part Number: UP-5B
Weight: 0.12

Universal push-button igniter. Round male connector. Includes locking nut.

For more information about ignition systems and components, please see article Ignition 101 in our help center.

Part Number: UP-4B
Weight: 0.3

Push-button electronic igniter with four (4) spade connectors. Black cap. Uses one AAA battery (not included). Requires a 3/4” mounting hole.

For more information about ignition systems and components, please see article Ignition 101 in our help center.

Part Number: TS-IG4010
Weight: 0.2

TS-IG4010 fits these 26 Member's Mark models:
GR2039201-MM-00 GR2071008-MM-00 M3905ALP M3905ANG M5205ALP M5205ANG	MEV05ALP MEV06ALP MONARCH04ALP MONARCH04ANG MONARCH04BNG REGAL04ALP	REGAL04ANG Y0005XC-2 Y0101XC Y0202XC Y0202XC-LP Y0202XC-NG	Y0660 Y0660-1 Y0660LP Y0660LP-2 Y0660NG Y0660NG-1	Y0660NG-2 Y0669NG

Push-button electronic igniter with three (3) spade connectors. Comes with sliver or black cap per availability. Needs (1) AA battery (not included); requires 7/8” mounting hole.

For more information about ignition systems and components, please see article Ignition 101 in our help center.

Part Number: TS-IG3007
Weight: 0.2

TS-IG3007 fits this one Member's Mark model:
PG-4030400LG

Push-button electronic igniter with two (2) spade connectors. Black cap. 1 AAA battery (not included).

For more information about ignition systems and components, please see article Ignition 101 in our help center.

Part Number: TS-IG2006
Weight: 0.2

TS-IG2006 fits these 8 Member's Mark models:
B10PG20-2C B10PG20-2R	M3905ALP M3905ANG	Y0660 Y0660LP-2	Y0660NG Y0660NG-2

Battery powered push button igniter.

• Has six (6) spade type male connectors.
• Uses 1 AA battery (not supplied)
• Requires 7/8” mounting hole.

For more information about ignition systems and components, please see article Ignition 101 in our help center.

Part Number: IGEIB6-B
Weight: 0.3

IGEIB6-B fits these 9 Member's Mark models:
720-0691A 720-0882D	730-0691A B09SMG1-3F	BG179A GR2210601-MM-00	M3206ALP M3206ANG	MG3208SLP

Battery powered push button igniter.

• Has four (4) spade type male connectors.
• Uses 1 AAA battery (not supplied)
• Requires 3/4” or 13/16” mounting hole.

For more information about ignition systems and components, please see article Ignition 101 in our help center.

Part Number: IGEIB4-B
Weight: 0.3

IGEIB4-B fits these 26 Member's Mark models:
GR2039201-MM-00 GR2071008-MM-00 M3905ALP M3905ANG M5205ALP M5205ANG	MEV05ALP MEV06ALP MONARCH04ALP MONARCH04ANG MONARCH04BNG REGAL04ALP	REGAL04ANG Y0005XC-2 Y0101XC Y0202XC Y0202XC-LP Y0202XC-NG	Y0660 Y0660-1 Y0660LP Y0660LP-2 Y0660NG Y0660NG-1	Y0660NG-2 Y0669NG

Battery powered push button igniter.

• Has two (2) spade type male connectors.
• Uses 1 AAA battery (not supplied)
• Requires 3/4” or 13/16” mounting hole.

For more information about ignition systems and components, please see article Ignition 101 in our help center.

Part Number: IGEIB2-B
Weight: 0.3

IGEIB2-B fits these 8 Member's Mark models:
B10PG20-2C B10PG20-2R	M3905ALP M3905ANG	Y0660 Y0660LP-2	Y0660NG Y0660NG-2

20” igniter wire with female spade and round connector.

For more information about ignition systems and components, please see article Ignition 101 in our help center.

Part Number: IG-7B
Weight: 0.02

IG-7B fits these 21 Member's Mark models:
M3206ALP M3206ANG M3207ALP M3207ANG M3905ALP	M3905ANG MEV05ALP MEV06ALP MG3208SLP MONARCH04ALP	MONARCH04ANG MONARCH04BNG REGAL04ALP REGAL04ANG Y0005XC-2	Y0101XC Y0202XC Y0202XC-LP Y0202XC-NG Y0660-1	Y0669NG

Collector Box, Ignitor Probe (electrode) and wire. SET OF FOUR (4). Use one per burner. Fits Master Forge BG179A 4-Burner grill model.

For more information about ignition systems and components, please see article Ignition 101 in our help center.

Part Number: IG-49B-X4
Weight: 0.6

IG-49B-X4 fits this one Member's Mark model:
BG179A

Collector Box, Ignitor Probe (electrode) and wire. Use one per burner. Fits Master Forge BG179 series grill models.

For more information about ignition systems and components, please see article Ignition 101 in our help center.

Part Number: IG-49B
Weight: 0.15

IG-49B fits this one Member's Mark model:
BG179A

16” Universal Ignitor Wire

For more information about ignition systems and components, please see article Ignition 101 in our help center.

Part Number: IG-48B
Dimensions: 16
Weight: 0.05

IG-48B fits these 37 Member's Mark models:
720-0691A 720-0882D 730-0691A B09SMG1-3F B10PG20-2C B10PG20-2R BG179A	GR2039201-MM-00 GR2071008-MM-00 GR2210601-MM-00 M3206ALP M3206ANG M3905ALP M3905ANG	M5205ALP M5205ANG MEV05ALP MEV06ALP MG3208SLP MONARCH04ALP MONARCH04ANG	MONARCH04BNG REGAL04ALP REGAL04ANG Y0005XC-2 Y0101XC Y0202XC Y0202XC-LP	Y0202XC-NG Y0660 Y0660-1 Y0660LP Y0660LP-2 Y0660NG 3 more models...

Universal extention wire, male spade end & female round end.

For more information about ignition systems and components, please see article Ignition 101 in our help center.

Part Number: IG-46B
Dimensions: 2 1/2
Weight: 0.10

Ceramic electrode and gas collector box.

For more information about ignition systems and components, please see article Ignition 101 in our help center.

Part Number: IG-34B
Weight: .05

IG-34B fits these 9 Member's Mark models:
GR2039201-MM-00 MEV05ALP	MEV06ALP Y0660	Y0660LP Y0660LP-2	Y0660NG Y0660NG-1	Y0660NG-2

Electrode to Fit Many Import Grills Including some Kenmore, BBQ Pro, Sam's Club, K-Mart, Etc….

For more information about ignition systems and components, please see article Ignition 101 in our help center.

Part Number: IG-31B
Weight: .05

IG-31B fits these 14 Member's Mark models:
B08SMG-1 B09SMG-3 B09SMG1-3F	B10PG20-2C B10PG20-2R BQ05051-3	BQ06043-1 BQ06043-1-N GR2001402-MM-00	GR2001408-MM-00 GR2150901-MM-00 GR2210601-MM-00	GR2298901-MM-00 GR3055-014571

46” Wire with female spade connectors and square plastic connectors.

For more information about ignition systems and components, please see article Ignition 101 in our help center.

Part Number: IG-30B
Dimensions: 46
Weight: 0.1

IG-30B fits these 52 Member's Mark models:
720-0691A 720-0882D 730-0691A B08SMG-1 B09SMG-3 B09SMG1-3F B10PG20-2C	B10PG20-2R BG179A BQ05051-3 BQ06043-1 BQ06043-1-N CG2320401-MM GR2001402-MM-00	GR2001408-MM-00 GR2039201-MM-00 GR2071001-MM-00 GR2071008-MM-00 GR2071013-MM-00 GR2150901-MM-00 GR2210601-MM-00	GR2234801-MM-00 GR2298901-MM-00 GR3055-014571 M3206ALP M3206ANG M3905ALP M3905ANG	M5205ALP M5205ANG MEV05ALP MEV06ALP MG3208SLP MONARCH04ALP 18 more models...

Collector box with ceramic electrode and wire.

For more information about ignition systems and components, please see article Ignition 101 in our help center.

Part Number: IG-22B
Weight: 0.3

IG-22B fits this one Member's Mark model:
GR3055-14684

Burner-mounted ceramic igniter electrode with mounting bracket and hardware.

For more information about ignition systems and components, please see article Ignition 101 in our help center.

Part Number: IG-20B
Weight: 0.05

IG-20B fits these 8 Member's Mark models:
CG2320401-MM GR2071008-MM-00	M3206ALP M3206ANG	M3207ALP M3207ANG	MG3208SLP PG-40606SOLA

Burner-mounted ceramic electrode, wire, and mounting bracket.

For more information about ignition systems and components, please see article Ignition 101 in our help center.

Part Number: IG-19B
Weight: 0.1

IG-19B fits these 11 Member's Mark models:
720-0582 720-0582B 720-0584	720-0584A 720-0691A 720-0709B	720-0778A 720-0778C 730-0582	730-0584 730-0691A

Stainless steel collector box and ceramic electrode with round connector. Includes mounting nuts and washer.

For more information about ignition systems and components, please see article Ignition 101 in our help center.

Part Number: IG-17B
Weight: 0.11

IG-17B fits these 21 Member's Mark models:
M3206ALP M3206ANG M3207ALP M3207ANG M3905ALP	M3905ANG MEV05ALP MEV06ALP MG3208SLP MONARCH04ALP	MONARCH04ANG MONARCH04BNG REGAL04ALP REGAL04ANG Y0005XC-2	Y0101XC Y0202XC Y0202XC-LP Y0202XC-NG Y0660-1	Y0669NG

Universal collector box with electrode and wire. Fits most H burners, cast iron and stainless. Mounts to burner using venturi screws. Slotted construction allow universal adjustment of electrode position.

For more information about ignition systems and components, please see article Ignition 101 in our help center.

Part Number: IG-15B
Weight: 0.3

Electrode and connector wire with female spade end for main burner.

For more information about ignition systems and components, please see article Ignition 101 in our help center.

Part Number: 09581
Dimensions: 3 9/16” x 1 1/16”
Material: ceramic
Weight: 0.1

09581 fits these 2 Member's Mark models:
GAS0565AS	GAS056ASO

Burner mounted electrodes with male spade connectors. SET OF FOUR (4).

• Wire not included. Commonly used with wire part# 03610.
• Female spade connector on wire connects to male spade connector of electrode.
• If used with existing wire, confirm connecting end of wire is a female spade connector
• Usually, one electrode required per burner

NOTE: Electrodes provide the spark that ignites the gas when the ignitor button is depressed, or the knob is turned. They're the spark plug of the grill. ==> For more information on grill ignition systems, including how to connect electrodes to spark generators/ignitors, see article Ignition 101 in our help center.

Part Number: 09571-X4
Dimensions: 4 3/8” x 1”
Material: ceramic
Weight: 0.4

09571-X4 fits this one Member's Mark model:
GR2298901-MM-00

Burner mounted electrodes with male spade connectors. SET OF THREE (3).

• Wire not included. Commonly used with wire part# 03610.
• Female spade connector on wire connects to male spade connector of electrode.
• If used with existing wire, confirm connecting end of wire is a female spade connector
• Usually, one electrode required per burner

NOTE: Electrodes provide the spark that ignites the gas when the ignitor button is depressed, or the knob is turned. They're the spark plug of the grill. ==> For more information on grill ignition systems, including how to connect electrodes to spark generators/ignitors, see article Ignition 101 in our help center.

Part Number: 09571-X3
Dimensions: 4 3/8” x 1”
Material: ceramic
Weight: 0.3

09571-X3 fits these 2 Member's Mark models:
GR2071001-MM-00	GR2071013-MM-00

Burner mounted electrode with male spade connector.

• Wire not included. Commonly used with wire part# 03610.
• Female spade connector on wire connects to male spade connector of electrode.
• If used with existing wire, confirm connecting end of wire is a female spade connector
• Usually, one electrode required per burner

NOTE: Electrodes provide the spark that ignites the gas when the ignitor button is depressed, or the knob is turned. They're the spark plug of the grill. ==> For more information on grill ignition systems, including how to connect electrodes to spark generators/ignitors, see article Ignition 101 in our help center.

Also available in more economical 3 and 4 piece multi-packs. See part 09571-X3 and X4.

Part Number: 09571
Dimensions: 4 3/8” x 1”
Material: ceramic
Weight: 0.1

09571 fits these 3 Member's Mark models:
GR2071001-MM-00	GR2071013-MM-00	GR2298901-MM-00

Burner mounted electrode, 33” wire with female spade connector (notice end of connector wire has a 90 degree bend).

For more information about ignition systems and components, please see article Ignition 101 in our help center.

Part Number: 04434
Dimensions: 4 3/16” x 1 1/16”
Weight: 0.1

04434 fits this one Member's Mark model:
720-0882D

electrode

For more information about ignition systems and components, please see article Ignition 101 in our help center.

Part Number: 04433
Dimensions: 4 1/2”
Weight: 0.2

04433 fits this one Member's Mark model:
720-0830F

Electrode with 24.5” wire that has a female spade/flat end. To lengthen the wire use adapter # 03198 and extension wire # 03750.

For more information about ignition systems and components, please see article Ignition 101 in our help center.

Part Number: 04432
Dimensions: 4”
Material: ceramic
Weight: 0.1

04432 fits this one Member's Mark model:
720-0778C

Ceramic electrode with male spade connector.

For more information about ignition systems and components, please see article Ignition 101 in our help center.

Part Number: 04100
Material: ceramic
Weight: 0.1

04100 fits these 4 Member's Mark models:
BQ05046-6	BQ05046-6-A	BQ05046-6N	BQ05046-6N-A

Burner mounted electrodes with male spade connectors. SET OF FIVE (5). Includes small mounting bolts and nuts.

• Wire not included. Commonly used with wire part# 03610.
• Female spade connector on wire connects to male spade connector of electrode.
• If used with existing wire, confirm connecting end of wire is a female spade connector
• Usually, one electrode required per burner

NOTE: Electrodes provide the spark that ignites the gas when the ignitor button is depressed, or the knob is turned. They're the spark plug of the grill. ==> For more information on grill ignition systems, including how to connect electrodes to spark generators/ignitors, see article Ignition 101 in our help center.

Part Number: 04022-X5
Material: ceramic
Weight: 0.5

04022-X5 fits this one Member's Mark model:
GR2210601-MM-00

Burner mounted electrodes with male spade connectors. SET OF FOUR (4). Includes small mounting bolts and nuts.

• Wire not included. Commonly used with wire part# 03610.
• Female spade connector on wire connects to male spade connector of electrode.
• If used with existing wire, confirm connecting end of wire is a female spade connector
• Usually, one electrode required per burner

NOTE: Electrodes provide the spark that ignites the gas when the ignitor button is depressed, or the knob is turned. They're the spark plug of the grill. ==> For more information on grill ignition systems, including how to connect electrodes to spark generators/ignitors, see article Ignition 101 in our help center.

Part Number: 04022-X4
Material: ceramic
Weight: 0.4

04022-X4 fits these 4 Member's Mark models:
B08SMG-1	B09SMG-3	GR2150901-MM-00	GR2298901-MM-00

Burner mounted electrodes with male spade connectors. SET OF THREE (3). Includes small mounting bolts and nuts.

• Wire not included. Commonly used with wire part# 03610.
• Female spade connector on wire connects to male spade connector of electrode.
• If used with existing wire, confirm connecting end of wire is a female spade connector
• Usually, one electrode required per burner

NOTE: Electrodes provide the spark that ignites the gas when the ignitor button is depressed, or the knob is turned. They're the spark plug of the grill. ==> For more information on grill ignition systems, including how to connect electrodes to spark generators/ignitors, see article Ignition 101 in our help center.

Part Number: 04022-X3
Material: ceramic
Weight: 0.3

04022-X3 fits these 3 Member's Mark models:
B09SMG-3	B09SMG1-3F	BQ05051-3

Burner mounted electrodes with male spade connectors. SET OF TWO (2). Includes small mounting bolts and nuts.

• Wire not included. Commonly used with wire part# 03610.
• Female spade connector on wire connects to male spade connector of electrode.
• If used with existing wire, confirm connecting end of wire is a female spade connector
• Usually, one electrode required per burner

NOTE: Electrodes provide the spark that ignites the gas when the ignitor button is depressed, or the knob is turned. They're the spark plug of the grill. ==> For more information on grill ignition systems, including how to connect electrodes to spark generators/ignitors, see article Ignition 101 in our help center.

Part Number: 04022-X2
Material: ceramic
Weight: 0.2

04022-X2 fits these 5 Member's Mark models:
B10PG20-2C	B10PG20-2R	GR2001402-MM-00	GR2001408-MM-00	GR3055-014571

Burner mounted electrodes with male spade connectors. SET OF THREE (3). Includes small mounting bolts and nuts.

• Wire not included. Commonly used with wire part# 03610.
• Female spade connector on wire connects to male spade connector of electrode.
• If used with existing wire, confirm connecting end of wire is a female spade connector
• Usually, one electrode required per burner

NOTE: Electrodes provide the spark that ignites the gas when the ignitor button is depressed, or the knob is turned. They're the spark plug of the grill. ==> For more information on grill ignition systems, including how to connect electrodes to spark generators/ignitors, see article Ignition 101 in our help center.

Part Number: 04010-X3
Material: ceramic
Weight: 0.15

04010-X3 fits this one Member's Mark model:
GR2071008-MM-00

Universal adapter wire with male round and female spade connectors.

For more information about ignition systems and components, please see article Ignition 101 in our help center.

Part Number: 03751
Weight: 0.05

20” Ignitor adapter wire with female spade connector and male round connector. Used primarily on Ducane models 7100 and 7200 to extend the wire from the 03758 collector box and electrode to the electronic spark generator (igniter).

For more information about ignition systems and components, please see article Ignition 101 in our help center.

Part Number: 03750
Dimensions: 1/16
Weight: 0.05

03750 fits this one Member's Mark model:
720-0778C

Ground wire required when replacing spark generator for a valve-triggered electrode with a remote switch-triggered spark generator. 03621 plugs into one switch inlet; ring connects to generator neck; switch wire plugs into the other generator switch inlet

For more information about ignition systems and components, please see article Ignition 101 in our help center.

Part Number: 03621
Dimensions: 1 1/8” x 1 1/8”
Weight: 0.1

03621 fits these 6 Member's Mark models:
720-0709B 720-0778C	CG2320401-MM M3207ALP	M3207ANG PG-40606SOLA

Ignition connection wires used to connect battery powered spark generators to electrodes. SET OF FOUR (4) 47” wires.

• Each wire has female spade connectors on one end and square plastic connectors on the other
• Square plastice connector attaches to spark generator
• Female spade connector ataches to electrode

NOTE: For more information on grill ignition systems, including how to connect electrodes to spark generators/ignitors, see article Ignition 101 in our help center.

Part Number: 03610-X4
Weight: 0.2

03610-X4 fits these 2 Member's Mark models:
B09SMG1-3F	GR2298901-MM-00

Universal battery powered push button ignitor.

• 1.5 volt
• Has five (5) terminals (male spade connector)
• Uses a single AA battery (not included))
• 03610 and 03620 wires are commonly used with this igniter (not included)
• Requires 7/8” mounting hole
• Overall dimensions: 2” x 3 3/8” x 3”
• Some original igniters had an integrated ground wire. Use wire part# 03620 for this purpose.

For more information about ignition systems and components, please see article Ignition 101 in our help center.

Part Number: 03380
Dimensions: 3 5/16” x 2”
Weight: 0.7

Replacement electrode for use with burner 13361.

• Ceramic insulator
• 22” wire with female spade connector
• Locking nuts

For more information about ignition systems and components, please see article Ignition 101 in our help center.

Part Number: 03361
Material: ceramic
Weight: 0.2

03361 fits these 5 Member's Mark models:
720-0584	720-0584A	720-0586	720-0586A	730-0586

Battery powered ignitor/spark generator for Surefire electronic ignition systems using remote button/trigger switch.

Note: Some original ignitors (spark generators) that 03352 replaces had an integrated/built-in ground wire which is not present on this part (03352). If the ignitor you are replacing has an integrated/built-in ground wire, you will also need our ground wire part 03621. Inspect your system.

• 1.5 volt
• Has five (5) spark outlets (male spade connector)
• Has two (2) male spade connectors for the button/trigger switch part 03152 (sold separately)
• Uses a single AA battery (not included)
• Requires 7/8” mounting hole
• Overall dimensions: 2” x 3 3/8” x 2 5/8”

NOTE: The battery cap is not a push button. The ignitor is fired by a remote button/trigger switch.

For more information about ignition systems and components, please see article Ignition 101 in our help center.

Part Number: 03352
Dimensions: 3 3/8” x 2”
Weight: 0.7

03352 fits these 7 Member's Mark models:
720-0584 720-0584A	720-0709B 720-0778A	720-0778C M3207ALP	M3207ANG

Battery powered ignitor/spark generator for Surefire electronic ignition systems using remote button/trigger.

• 1.5 volt
• Has four(4) spark outlets (male spade connector)
• Has two (2) male spade connectors for trigger (button) part #03152 (sold separately)
• Uses a single AA battery (not included)
• Requires 7/8” mounting hole

NOTE: The battery cap is not a push button. The ignitor is fired by a remote button/switch.

For more information about ignition systems and components, please see article Ignition 101 in our help center.

Part Number: 03344
Dimensions: 2” x 2 1/2”
Weight: 0.5

03344 fits these 2 Member's Mark models:
CG2320401-MM	PG-40606SOLA

Small AA battery powered push button spark generator.

• 1.5 volt
• Has two (2) terminals (male spade connector)
• Uses a single AA battery (not included)
• 03610 and 03620 wires are commonly used with this igniter (not included)
• Requires 7/8” mounting hole

For more information about ignition systems and components, please see article Ignition 101 in our help center.

Part Number: 03342
Weight: 0.3

03342 fits these 5 Member's Mark models:
GR2001402-MM-00	GR2001408-MM-00	GR2234801-MM-00	GR2234802-MM-00	GR3055-014571

Universal three-outlet battery powered push button ignitor.

• 1.5 volt
• Has three (3) terminals (male spade connector)
• Uses a single AA battery (not included)
• 03610 and 03620 wires are commonly used with this igniter (not included)
• Requires 7/8” mounting hole

For more information about ignition systems and components, please see article Ignition 101 in our help center.

Part Number: 03333
Dimensions: 2 9/16” x 2”
Weight: 0.5

Universal 2 3/4” adaptor wire with a round female end and a male spade end that has a protective cover.

For more information about ignition systems and components, please see article Ignition 101 in our help center.

Part Number: 03199C
Weight: 0.05

Universal 5 1/2” jumper wire with female spade ends to close off unused pair of outlets in battery-powered spark generator, or use as an adaptor wire.
NOTICE: EACH END HAS A PLASTIC PROTECTOR CAP.

For more information about ignition systems and components, please see article Ignition 101 in our help center.

Part Number: 03197
Weight: 0.05

Ignition module switch for spark generators that accept wired remote (button) trigger switches. Fits our spark generator part numbers 03322, 03332, 03344, 03352, 03356, 03387 and 03388.
Includes:

• Push-button ignition module switch with two male spade connectors on back
• Two 20” wires with female spade connectors
• One plastic mounting nut

For more information about ignition systems and components, please see article Ignition 101 in our help center.

Part Number: 03152
Dimensions: 17 3/4” x 1”
Weight: 0.1

03152 fits these 9 Member's Mark models:
720-0584 720-0584A	720-0709B 720-0778A	720-0778C CG2320401-MM	M3207ALP M3207ANG	PG-40606SOLA

Burner mounted electrodes with male spade connector. SET OF TWO (2). Includes small mounting bolts and nuts.

• Wire not included. Commonly used with wire part# 03610.
• Female spade connector on wire connects to male spade connector of electrode.
• If used with existing wire, confirm connecting end of wire is a female spade connector
• Usually, one electrode required per burner

NOTE: Electrodes provide the spark that ignites the gas when the ignitor button is depressed, or the knob is turned. They're the spark plug of the grill. ==> For more information on grill ignition systems, including how to connect electrodes to spark generators/ignitors, see article Ignition 101 in our help center.

Part Number: 02291-X2
Dimensions: 3 3/4” x 0 11/16”
Weight: 0.2

02291-X2 fits these 2 Member's Mark models:
GR2234801-MM-00	GR2234802-MM-00

Burner mounted electrode with male spade connector. Includes small mounting bolt and nut.

• Wire not included. Commonly used with wire part# 03610.
• Female spade connector on wire connects to male spade connector of electrode.
• If used with existing wire, confirm connecting end of wire is a female spade connector
• Usually, one electrode required per burner

NOTE: Electrodes provide the spark that ignites the gas when the ignitor button is depressed, or the knob is turned. They're the spark plug of the grill. ==> For more information on grill ignition systems, including how to connect electrodes to spark generators/ignitors, see article Ignition 101 in our help center.

Also available in more economical 2 and 3 piece multi-packs. See part 04022-X2, X3.

Part Number: 02291
Dimensions: 3 3/4” x 0 11/16”
Weight: 0.1

02291 fits these 2 Member's Mark models:
GR2234801-MM-00	GR2234802-MM-00

Electrode and wire. Includes mounting bolt and nut. Wire connects to spark generator with flat female spade connector, which is typically used with electronic (battery operated) ignitors (see Ignition 101 in our help center). Includes an extra 16” connector wire with flat female spade end and male spade end for some applications (not shown in photo).

Part Number: 00162
Material: ceramic
Weight: 0.1

00162 fits this one Member's Mark model:
PG-4030400LG