Member's Mark Valves, Orifices, and Manifolds

#55 orifice for infrared burners use on natural Gas grills. Includes brass elbow with 1/4” compression fitting.

Part Number: CLA-VB0246
Dimensions: 3 3/8” x 17 1/4”
Material: stainless steel and ceramic
Weight: 0.3

CLA-VB0246 fits these 6 Member's Mark models:
720-0586 720-0586A	BQ05046-6 BQ05046-6-A	BQ06042-1 BQ06042-1-N

#63 orifice for infrared burner CLA-BL0229; use on liquid propane (LP) gas grills. Includes brass elbow with 1/4” compression fitting.

Part Number: CLA-VB0245
Dimensions: 3 3/8” x 17 1/4”
Material: stainless steel and ceramic
Weight: 0.3

CLA-VB0245 fits these 6 Member's Mark models:
720-0586 720-0586A	BQ05046-6 BQ05046-6-A	BQ06042-1 BQ06042-1-N

Clamp-on brass valve with 45° gas outlet.

• D-Value is 6 o'clock
• Stem diameter: 8mm (about 5/16”)
• Orifice included
• Orifice pre-drilled to #59. For LP, this is approximately 11,654 BTU per burner.

Part Number: 3742C
Dimensions: 4 3/8” x 1 5/8”
Material: brass
Weight: 0.5

Clamp-on brass gas valve with straight outlet. Includes orifice.

• D-Value: 12 o'clock
• Stem diameter: 6mm
• Stem length: 1 3/4”

Includes orifice with #72 starter hole. Must be drilled to proper drill size.

Part Number: 3700C
Dimensions: 4 15/16” x 2 1/8”
Material: brass
Weight: 0.5

3700C fits these 8 Member's Mark models:
Y0660 Y0660-1	Y0660LP Y0660LP-2	Y0660NG Y0660NG-1	Y0660NG-2 Y0669NG

Brass long blunt-end hood orifice drilled to #64 starter hole. Fits valve 3042C, others. Must be drilled to proper drill size.

If you would like us to drill the orifice(s) for you, there is a single $15 fee for this service, which will be added to the order when processed. Please tell us the number of burners in your grill and the total BTUs of your grill (less side burner and rotisserie burner, if any). BTU rating information can usually be found on the grill's CSA certification tag, located somewhere on the grill. Please furnish this, along with any other information you deem relevant, in the Message to CLA box during checkout.

Part Number: 31800
Dimensions: 1 5/16” x 0 9/16”
Material: brass
Weight: 0.1

31800 fits these 13 Member's Mark models:
Y0005XC-2 Y0101XC Y0202XC	Y0202XC-LP Y0202XC-NG Y0660	Y0660-1 Y0660LP Y0660LP-2	Y0660NG Y0660NG-1 Y0660NG-2	Y0669NG

Brass orifice. 6mm x 3/4” cone shaped orifice with #64 drill size starter hole. For Electec and other clamp-on valves. Must be drilled to proper drill size.

If you would like us to drill the orifice(s) for you, there is a single $15 fee for this service, which will be added to the order when processed. Please tell us the number of burners in your grill and the total BTUs of your grill (less side burner and rotisserie burner, if any). BTU rating information can usually be found on the grill's CSA certification tag, located somewhere on the grill. Please furnish this, along with any other information you deem relevant, in the Message to CLA box during checkout.

Part Number: 31400
Dimensions: 0 3/4” x 0 5/16”
Material: brass
Weight: 0.01

31400 fits these 8 Member's Mark models:
Y0660 Y0660-1	Y0660LP Y0660LP-2	Y0660NG Y0660NG-1	Y0660NG-2 Y0669NG

Neoprene valve gasket for clamp-on gas control valves. 19mm.

Part Number: 00019
Dimensions: 0 1/2” x 0 1/4”
Material: neoprene
Weight: 0.01

00019 fits these 13 Member's Mark models:
Y0005XC-2 Y0101XC Y0202XC	Y0202XC-LP Y0202XC-NG Y0660	Y0660-1 Y0660LP Y0660LP-2	Y0660NG Y0660NG-1 Y0660NG-2	Y0669NG