Member's Mark Heat Plates

Stainless steel heat plate.

Part Number: SCHP6
Dimension Front-to-Back: 11 13/16”
Dimension Side-to-Side: 8 7/16”
Material: stainless steel
Weight: 1.0

SCHP6 fits these 5 Member's Mark models:
B10PG20-2C	B10PG20-2R	GR2001402-MM-00	GR2001408-MM-00	GR3055-014571

Stainless steel heat plate; also referred to as a flame tamer and savor plate.

Part Number: SCHP4
Dimension Front-to-Back: 16 3/8”
Dimension Side-to-Side: 3 13/16”
Material: stainless steel
Weight: 1.0

SCHP4 fits these 3 Member's Mark models:
M3207ALP	M3207ANG	MG3208SLP

Stainless steel heat plate.

Part Number: SCHP3
Dimension Front-to-Back: 16 1/8”
Dimension Side-to-Side: 4 5/8”
Material: stainless steel
Weight: 1.0

SCHP3 fits these 5 Member's Mark models:
B09SMG-3	B09SMG1-3F	BQ05051-3	BQ06043-1	BQ06043-1-N

Stainless steel heat plate.

Part Number: SCHP2
Dimension Front-to-Back: 16 1/8”
Dimension Side-to-Side: 8 1/8”
Material: stainless steel
Weight: 1.3

SCHP2 fits these 9 Member's Mark models:
B09SMG-3 B09SMG1-3F	BQ05046-6 BQ05046-6-A	BQ05046-6A BQ05046-6N	BQ05046-6N-A BQ06043-1	BQ06043-1-N

Stainless steel heat plate.

Part Number: SCHP1
Dimension Front-to-Back: 14 5/8”
Dimension Side-to-Side: 3 7/8”
Material: stainless steel
Weight: 1.0

SCHP1 fits these 2 Member's Mark models:
M3206ALP	M3206ANG

Ceramic Flame Tamers. Box of 6. Use with rack part# BG-45 (see Rock Grates).

Part Number: SCFT
Dimension Front-to-Back: 7”
Dimension Side-to-Side: 8”
Material: ceramic
Weight: 12.0

SCFT fits these 19 Member's Mark models:
608SB MONARCH04ALP MONARCH04ANG MONARCH04BNG	REGAL04ALP REGAL04ANG Y0005XC-2 Y0101XC	Y0202XC Y0202XC-LP Y0202XC-NG Y0660	Y0660-1 Y0660LP Y0660LP-2 Y0660NG	Y0660NG-1 Y0660NG-2 Y0669NG

Rack for ceramic Flame Tamers; nickel plated heavy duty wire 5/16” thick. Uses 12 ceramic flame tamers part# P1736A-R (not included).

NOTE: This replacement part is not exactly like the original P1739A rack, but a very functional replacement. It cannot use the original ceramic Flame Tamers. The original rack held six larger Flame Tamers, while P01720021B-R uses twelve smaller ones. Using only 10 tamers will allow the smoker burner to remain uncovered as was the case with the original rack.

Part Number: P1739A-R
Dimension Front-to-Back: 17 1/4”
Dimension Side-to-Side: 33 7/16”
Material: nickel plated steel
Weight: 8.95

P1739A-R fits these 3 Member's Mark models:
Y0660	Y0660LP	Y0660NG

Nickel plated heavy duty steel 5/16” thick Flame Tamer rack. Holds six ceramic Flame Tamers part # SCFT/P1736A-R (not included). This is an aftermarket part made to replace original part numbers P1736B and P01722001B, which are no longer available.

Fits models:

• Y0101XC
• Y0202XC
• and others

Part Number: P1736B-R
Dimension Front-to-Back: 16 5/8”
Dimension Side-to-Side: 31”
Material: nickel plated steel
Weight: 5.6

P1736B-R fits these 5 Member's Mark models:
Y0005XC-2	Y0101XC	Y0202XC	Y0202XC-LP	Y0202XC-NG

Ceramic Savor Plate. Measures 7 1/16” x 4 3/4”. Box of 4.

Note: This part is used in racks P01717003E, and P01717002E.

Fits models:

• M3905ALP
• M3905ANG
• M5205ALP
• M5205ANG
• And others

Part Number: P01804006A-R
Dimension Front-to-Back: 7 1/16”
Dimension Side-to-Side: 4 3/4”
Material: ceramic
Weight: 4.0

P01804006A-R fits these 4 Member's Mark models:
M3905ALP	M3905ANG	M5205ALP	M5205ANG

Flame Tamer Rack. Heavy duty nickel plated 5/16” steel rod. Each rack holds twelve (12) P01804001A-R ceramic flame tamers (sold separately). Also known as part number P1736A.

NOTE: This is an aftermarket part made to replace original part number P01722021B, which is no longer available.

Fits models:

• MONARCH04
• Y0660
• and others

Part Number: P01722021B-R
Dimension Front-to-Back: 17 1/4”
Dimension Side-to-Side: 33 7/16”
Material: nickel plated steel
Weight: 8.95

P01722021B-R fits these 4 Member's Mark models:
MONARCH04ALP	MONARCH04ANG	Y0660LP-2	Y0660NG-2

Nickel plated heavy duty steel 5/16” thick Flame Tamer rack. Holds six ceramic Flame Tamers part # SCFT/P1736A-R (not included). This is an aftermarket part made to replace original part numbers P1736B and P01722001B, which are no longer available.

Fits models:

• Regal04
• Y005XC-1
• and others

Part Number: P01722001B-R
Dimension Front-to-Back: 16 5/8”
Dimension Side-to-Side: 31”
Material: nickel plated steel
Weight: 5.6

P01722001B-R fits these 2 Member's Mark models:
REGAL04ALP	REGAL04ANG

Savor Plate Rack. Heavy duty, 304 premium grade stainless steel with 5/16” rods. Each rack holds three (3) P01804006A-R ceramic flame tamers (sold separately).

NOTE: This is an aftermarket part made to replace original part number P01717003E, which is no longer available.

Fits models:

• M3905ALP
• M3905ANG
• and others

Part Number: P01717003E-R
Dimension Front-to-Back: 17 3/8”
Dimension Side-to-Side: 9”
Material: nickel plated steel
Weight: 1.0

P01717003E-R fits these 2 Member's Mark models:
M3905ALP	M3905ANG

Savor Plate Rack. Heavy duty, 304 premium grade stainless steel with 5/16” rods. Each rack holds three (3) P01804006A-R ceramic flame tamers (sold separately).

NOTE: This is an aftermarket part made to replace original part number P01717002E, which is no longer available.

Fits models:

• M5205ALP
• M5205ANG
• and others

Part Number: P01717002E-R
Dimension Front-to-Back: 17 3/8”
Dimension Side-to-Side: 9”
Material: stainless steel
Weight: 1.0

P01717002E-R fits these 2 Member's Mark models:
M5205ALP	M5205ANG

Stainless steel heat plate/ Flame Tamer.

Part Number: NGSAMHP1
Dimension Front-to-Back: 15 1/4”
Dimension Side-to-Side: 4 7/8”
Material: stainless steel
Weight: 0.6

NGSAMHP1 fits these 4 Member's Mark models:
720-0691A	720-0778A	720-0778C	730-0691A

Stainless steel Flame Tamer.

Part Number: NGKIRHP1
Dimension Front-to-Back: 15 3/8”
Dimension Side-to-Side: 5 1/8”
Material: stainless steel
Weight: 1.0

NGKIRHP1 fits this one Member's Mark model:
720-0582B

Nexgrill Heat Tent

Part Number: NGHP3
Dimension Front-to-Back: 14 5/8”
Dimension Side-to-Side: 4 1/4”
Material: stainless steel
Weight: 0.75

NGHP3 fits this one Member's Mark model:
720-0882D

Stainless steel Flame Tamer.

Part Number: NGHP2
Dimension Front-to-Back: 16 1/8”
Dimension Side-to-Side: 3 3/8”
Material: stainless steel
Weight: 1.0

NGHP2 fits this one Member's Mark model:
720-0709B

Stainless steel Flame Tamer.

Part Number: NGCHP4
Dimension Front-to-Back: 17 5/16”
Dimension Side-to-Side: 5 7/8”
Material: stainless steel
Weight: 0.7

NGCHP4 fits these 3 Member's Mark models:
720-0584	720-0584A	730-0584

Stainless steel Flame Tamer.

Part Number: NGCHP2
Dimension Front-to-Back: 17 3/4”
Dimension Side-to-Side: 6 3/8”
Material: stainless steel
Weight: 0.7

NGCHP2 fits these 2 Member's Mark models:
720-0586	730-0586

Stainless Steel Flame Tamers for Master Forge BG179 series gas grills. SET OF FOUR (4).

Part Number: MFHP2-X4
Dimension Front-to-Back: 15 3/4”
Dimension Side-to-Side: 5 1/4”
Material: stainless steel
Weight: 2.8

MFHP2-X4 fits this one Member's Mark model:
BG179A

Stainless Steel Flame Tamers for Master Forge BG179 series gas grills. SET OF Three (3).

Part Number: MFHP2-X3
Dimension Front-to-Back: 15 3/4”
Dimension Side-to-Side: 5 1/4”
Material: stainless steel
Weight: 2.1

MFHP2-X3 fits this one Member's Mark model:
BG179A

Master Forge stainless steel Flame Tamer.

Part Number: MFHP2
Dimension Front-to-Back: 15 3/4”
Dimension Side-to-Side: 5 1/4”
Material: stainless steel
Weight: 0.70

MFHP2 fits this one Member's Mark model:
BG179A

Stainless steel heat plate/ Flame Tamer.

Part Number: KENHP3
Dimension Front-to-Back: 14 15/16”
Dimension Side-to-Side: 3 3/4”
Material: stainless steel
Weight: 0.6

KENHP3 fits these 3 Member's Mark models:
CG2320401-MM	PG-4030400LG	PG-40606SOLA

Grillmaster Heat Plate

Part Number: GMNGHP1
Dimension Front-to-Back: 14 1/4”
Dimension Side-to-Side: 3 3/8”
Material: stainless steel
Weight: 0.81

GMNGHP1 fits this one Member's Mark model:
720-0830F

Stainless steel Flavor Grid for Fire Magic Regal II series grills.

• Sold individually
• Commercial grade 304 stainless steel
• Number required varies by model

Part Number: FMHP3
Dimension Front-to-Back: 17 3/4”
Dimension Side-to-Side: 7/716”
Material: stainless steel
Weight: 1.0

SET OF THREE/3 PACK Stainless steel Flame Tamer. For many models, can also be used to replace ceramic flame tamers and the rack that holds them. Made in USA.

Part Number: CLA2721-X3
Dimension Front-to-Back: 16 3/4”
Dimension Side-to-Side: 9 3/4”
Material: stainless steel
Weight: 7.2

Stainless steel Flame Tamer. For many models, can also be used to replace ceramic flame tamers and the rack that holds them. Made in USA.

Part Number: CLA2721
Dimension Front-to-Back: 16 3/4”
Dimension Side-to-Side: 9 3/4”
Material: stainless steel
Weight: 2.4

CLA2721 fits these 19 Member's Mark models:
608SB MONARCH04ALP MONARCH04ANG MONARCH04BNG	REGAL04ALP REGAL04ANG Y0005XC-2 Y0101XC	Y0202XC Y0202XC-LP Y0202XC-NG Y0660	Y0660-1 Y0660LP Y0660LP-2 Y0660NG	Y0660NG-1 Y0660NG-2 Y0669NG

Replacement steel Flame Tamer. For many models, can also be used to replace ceramic flame tamers and the rack that holds them. Made in USA.
This part is currently out of stock, but more are already on the way and expected to arrive late Aug

Part Number: CLA1721
Dimension Front-to-Back: 16 7/8”
Dimension Side-to-Side: 9 3/4”
Material: carbon steel
Weight: 3.5

CLA1721 fits these 19 Member's Mark models:
608SB MONARCH04ALP MONARCH04ANG MONARCH04BNG	REGAL04ALP REGAL04ANG Y0005XC-2 Y0101XC	Y0202XC Y0202XC-LP Y0202XC-NG Y0660	Y0660-1 Y0660LP Y0660LP-2 Y0660NG	Y0660NG-1 Y0660NG-2 Y0669NG

Stainless steel Heat Distribution Plate also known as a Flame Tamer and Heat Plate. Fits Member's Mark grill model GR2150901-MM-00. Sold individually, four required. Made in USA.

NOTE: Sometimes shipped with vinyl peel-off coating. Remove before use.

Part Number: CLA-TS0420
Dimension Front-to-Back: 16”
Dimension Side-to-Side: 5”
Material: stainless steel
Weight: .90

CLA-TS0420 fits this one Member's Mark model:
GR2150901-MM-00

Stainless steel Savor Plate, also known as Flamer Tamer and Heat Plate. Sold individually. Made in USA.

NOTE: Sometimes shipped with vinyl peel-off coating. Remove before use.

Part Number: CLA-TS0314
Dimension Front-to-Back: 16 3/8”
Dimension Side-to-Side: 4 1/16”
Material: stainless steel
Weight: .75

CLA-TS0314 fits these 3 Member's Mark models:
M3207ALP	M3207ANG	MG3208SLP

SET OF FOUR/4 PACK Stainless steel Flame Tamer. Made in USA.

NOTE: Sometimes shipped with vinyl peel-off coating. Remove before use.

Part Number: CLA-TS0216-X4
Dimension Front-to-Back: 15 1/4”
Dimension Side-to-Side: 4 7/8”
Material: stainless steel
Weight: 3.2

CLA-TS0216-X4 fits these 4 Member's Mark models:
720-0691A	720-0778A	720-0778C	730-0691A

SET OF FOUR/4 PACK Stainless steel heat plate. Made in USA.

NOTE: Sometimes shipped with vinyl peel-off coating. Remove before use.

Part Number: CLA-TS0193-X4
Dimension Front-to-Back: 14 15/16”
Dimension Side-to-Side: 3 3/4”
Material: stainless steel
Weight: 2.6

CLA-TS0193-X4 fits these 3 Member's Mark models:
CG2320401-MM	PG-4030400LG	PG-40606SOLA

SET OF FIVE/5 PACK Stainless steel heat plate/Flame Tamer. Made in USA.

NOTE: Sometimes shipped with vinyl peel-off coating. Remove before use.

Part Number: CLA-TS0158-X5
Dimension Front-to-Back: 16 1/8”
Dimension Side-to-Side: 3 3/8”
Material: stainless steel
Weight: 3.85

CLA-TS0158-X5 fits this one Member's Mark model:
720-0709B

SET OF FOUR/4 PACK Stainless steel heat plate/Flame Tamer. Made in USA.

NOTE: Sometimes shipped with vinyl peel-off coating. Remove before use.

Part Number: CLA-TS0158-X4
Dimension Front-to-Back: 16 1/8”
Dimension Side-to-Side: 3 3/8”
Material: stainless steel
Weight: 3.08

CLA-TS0158-X4 fits this one Member's Mark model:
720-0709B

SET OF FOUR/4 PACK Stainless steel heat plate/Flame Tamer. Made in USA.

NOTE: Sometimes shipped with vinyl peel-off coating. Remove before use..

Part Number: CLA-TS0157-X4
Dimension Front-to-Back: 14 9/16”
Dimension Side-to-Side: 3 1/4”
Material: stainless steel
Weight: 2.88

CLA-TS0157-X4 fits this one Member's Mark model:
720-0830F

SET OF THREE/3 PACK Stainless steel heat plate/Flame Tamer. Made in USA.

NOTE: Sometimes shipped with vinyl peel-off coating. Remove before use.

Part Number: CLA-TS0157-X3
Dimension Front-to-Back: 14 9/16”
Dimension Side-to-Side: 3 1/4”
Material: stainless steel
Weight: 2.16

CLA-TS0157-X3 fits this one Member's Mark model:
720-0830F

SET OF FOUR/4 PACK Stainless steel Heat Distribution Plates/Flame Tamers. Made in USA.

NOTE: Sometimes shipped with vinyl peel-off coating. Remove before use.e.

Part Number: CLA-TS0156-X4
Dimension Front-to-Back: 16 15/16”
Dimension Side-to-Side: 3 15/16”
Material: stainless steel
Weight: 2.8

CLA-TS0156-X4 fits this one Member's Mark model:
GR3055-14684

SET OF THREE/3 PACK Stainless steel Heat Distribution Plates/Flame Tamers. Made in USA.

NOTE: Sometimes shipped with vinyl peel-off coating. Remove before use.e.

Part Number: CLA-TS0156-X3
Dimension Front-to-Back: 16 15/16”
Dimension Side-to-Side: 3 15/16”
Material: stainless steel
Weight: 2.1

CLA-TS0156-X3 fits this one Member's Mark model:
GR3055-14684

SET OF THREE/3 PACK Stainless steel heat diffuser. On some grill models it is also known as a Flame Tamer. Made in USA.

NOTE: Sometimes shipped with vinyl peel-off coating. Remove before use.

Part Number: CLA-TS0151-X3
Dimension Front-to-Back: 16 1/8”
Dimension Side-to-Side: 8 1/16”
Material: stainless steel
Weight: 4.05

CLA-TS0151-X3 fits these 11 Member's Mark models:
B09SMG-3 B09SMG1-3F BQ05046-6	BQ05046-6-A BQ05046-6A BQ05046-6N	BQ05046-6N-A BQ06042-1 BQ06042-1-N	BQ06043-1 BQ06043-1-N

Stainless steel Flame Tamer. Made in USA.

NOTE: Sometimes shipped with vinyl peel-off coating. Remove before use.

Part Number: CLA-TS0083
Dimension Front-to-Back: 17 1/4”
Dimension Side-to-Side: 5”
Material: stainless steel
Weight: 0.9

CLA-TS0083 fits these 4 Member's Mark models:
720-0582	720-0584A	730-0582	730-0584

SET OF FOUR/4 PACK Stainless steel Flame Tamer/heat plate.

This heat plate also provides an economical alternative to some other heat plates with the same front-to-back dimension.

• Sold individually, number required varies.
• Shipped with protective peel-off coating, remove before use.
• Made in USA.

Part Number: CLA-TS0020-X4
Dimension Front-to-Back: 17 3/4”
Dimension Side-to-Side: 6 3/8”
Material: stainless steel
Weight: 3.2

CLA-TS0020-X4 fits these 3 Member's Mark models:
720-0586	720-0586A	730-0586

SET OF THREE/3 PACK Stainless steel Flame Tamer/heat plate.

This heat plate also provides an economical alternative to some other heat plates with the same front-to-back dimension.

• Sold individually, number required varies.
• Shipped with protective peel-off coating, remove before use.
• Made in USA.

Part Number: CLA-TS0020-X3
Dimension Front-to-Back: 17 3/4”
Dimension Side-to-Side: 6 3/8”
Material: stainless steel
Weight: 2.4

CLA-TS0020-X3 fits these 3 Member's Mark models:
720-0586	720-0586A	730-0586

Stainless steel heat plate/ Flame Tamer. Sold individually, number required varies.

Part Number: BMHP7
Dimension Front-to-Back: 16 13/16”
Dimension Side-to-Side: 3 3/16”
Material: stainless steel
Weight: 0.5

BMHP7 fits this one Member's Mark model:
GR2210601-MM-00

Stainless steel heat distribution plate.

Part Number: BMHP1
Dimension Front-to-Back: 16 3/4”
Dimension Side-to-Side: 3 7/8”
Material: stainless steel
Weight: 0.7

BMHP1 fits this one Member's Mark model:
GR3055-14684

Stainless steel heat shield/ Flame Tamer. Sold individually, number required varies.


Part Number: BBQHP3
Dimension Front-to-Back: 16 9/16”
Dimension Side-to-Side: 4”
Material: stainless steel
Weight: 0.7

BBQHP3 fits these 2 Member's Mark models:
GR2071001-MM-00	GR2071013-MM-00

Porcelain steel Flame Tamers. SET OF SIX.

Part Number: 97371-X6
Dimension Front-to-Back: 14 9/16”
Dimension Side-to-Side: 3 1/4”
Material: porcelain steel
Weight: 3.3

97371-X6 fits this one Member's Mark model:
720-0830F

Stainless steel heat diffusers. SET OF THREE (3). On some grill models it is also known as a Flame Tamer.

Part Number: 96421-X3
Dimension Front-to-Back: 16 1/8”
Dimension Side-to-Side: 4 5/8”
Material: stainless steel
Weight: 2.55

96421-X3 fits these 3 Member's Mark models:
B09SMG-3	B09SMG1-3F	BQ05051-3

Porcelain steel Flame Tamers.

SET OF EIGHT (8).

Part Number: 93281-X8
Dimension Front-to-Back: 17 1/8”
Dimension Side-to-Side: 4 7/8”
Material: porcelain steel
Weight: 13.6

93281-X8 fits this one Member's Mark model:
GR2039201-MM-00

Porcelain steel Flame Tamer. Sold individually.

Part Number: 93281
Dimension Front-to-Back: 17 1/8”
Dimension Side-to-Side: 4 7/8”
Material: porcelain steel
Weight: 1.7

93281 fits this one Member's Mark model:
GR2039201-MM-00

Porcelain steel Heat Diffuser. Sold individually. Also known as a Flame Tamer.

Part Number: 93051
Dimension Front-to-Back: 17 1/4”
Dimension Side-to-Side: 4 15/16”
Material: porcelain steel
Weight: 1.6

93051 fits this one Member's Mark model:
720-0584A

Porcelain steel Flame Tamers. SET OF TWO (2).

Part Number: 92291-X2
Dimension Front-to-Back: 17 1/8”
Dimension Side-to-Side: 7 3/8”
Material: porcelain steel
Weight: 3.0

92291-X2 fits these 2 Member's Mark models:
GR2234801-MM-00	GR2234802-MM-00

Porcelain steel Flame Tamer.

Part Number: 92291
Dimension Front-to-Back: 17 1/8”
Dimension Side-to-Side: 7 3/8”
Material: porcelain steel
Weight: 1.5

92291 fits these 2 Member's Mark models:
GR2234801-MM-00	GR2234802-MM-00

Porcelain steel Heat Diffuser. Sold individually.

Part Number: 92021-X2
Dimension Front-to-Back: 11 13/16”
Dimension Side-to-Side: 8 7/16”
Material: porcelain steel
Weight: 2.6

92021-X2 fits these 5 Member's Mark models:
B10PG20-2C	B10PG20-2R	GR2001402-MM-00	GR2001408-MM-00	GR3055-014571

Stainless steel Heat Tents. SET OF FIVE (5).

Part Number: 91921-X5
Dimension Front-to-Back: 15 1/2”
Dimension Side-to-Side: 3 1/8”
Material: stainless steel
Weight: 4.5

91921-X5 fits these 2 Member's Mark models:
GAS0565AS	GAS056ASO

stainless steel heat plate

Part Number: 91921
Dimension Front-to-Back: 15 1/2”
Dimension Side-to-Side: 3 1/8”
Material: stainless steel
Weight: 0.9

91921 fits these 2 Member's Mark models:
GAS0565AS	GAS056ASO

Porcelain steel Flame Tamer. Sold individually.

Part Number: 90731
Dimension Front-to-Back: 16 1/8”
Dimension Side-to-Side: 3 3/8”
Material: porcelain steel
Weight: 1.0

90731 fits this one Member's Mark model:
720-0709B

Stainless steel replacement Heat Tent. Far better rust and corrosion resistance than the original porcelain steel version. Made in USA.

NOTE: Sometimes shipped with vinyl peel-off coating, remove before use.

Part Number: 47183T-24-R
Dimension Front-to-Back: 16 1/2”
Dimension Side-to-Side: 4”
Material: stainless steel
Weight: 0.80

47183T-24-R fits this one Member's Mark model:
GR2071008-MM-00

stainless steel Flav-R-Wave heat plate.
This part is currently out of stock, but more are already on the way and expected to arrive late June

Part Number: 10222-T225
Dimension Front-to-Back: 16 1/2”
Dimension Side-to-Side: 9 1/8”
Material: stainless steel
Weight: 1.85

10222-T225 fits this one Member's Mark model:
B09PG-4CP